GE ZIDI240WBII, ZIDS240HASS, ZIDS240PBSS, ZIDS240WBSS Installation Guide

Design Guide with

Installation

Instructions

Double-Drawer Built-In Refrigerator

ZIDI240
ZIDS240

monogram.com

Safety Information

BEFORE YOU BEGIN:

Read these instructions completelg and carefullg.

IM PORTANT - Sovetheseinstructions

for Iocol inspector's use.

IMPORTANT - Observeollgoverning codes

ond ordinonces.

Note to Installer - Be sure to leove these

instructions with the Consumer.

Note to Consumer - Keepthese instructions with

your Owner's Honuol for future reference.

WARNING - Thisopplioncemust be

properlygrounded.Seethesectionbelow.

AVERTISSEMENT-

Cet opporeil doit @trecorrectement mis 5 Ioterre.
Consulter Io section ou-dessous.

If you received o domoged Double-Drower Refrigerotor,
you should immediotely contoct your deoler or builder.

Skill Level -Instollotion requires bosic mechonicol

skills. Proper instollotion is the responsibility of the
instoller. Product foilure due to improper instollotion
is not covered under the GEApplionce Worronty.

WARNING:

• Double-DrowerRefrigerotorsoredesignedtobe
built-inonly.They connotbe usedfree-stonding.

Use thisopplionceonlyforitsintendedpurpose.

• Immediotely repoir or reploce electricol service cords
thot become froyed or domoged.

Unplug the unit before cleoning or moking repoirs.
Repoirs should be mode by o quolified service

technicion.

AVERTISSEMENT:

• Les r_frig_roteurs (_deux tiroirs sont conqus pour
@treencostr@suniquement. IIsne peuvent pos @tre
s_por_s.

• II ne fout utiliser cet opporeil que pour I'usoge pour
lequel il o @t@construit.

• IIfout r@porerou remplocer imm@diotement tout
cordon d'olimentotion @lectrique effiloch@ou
endommog&

D@broncherle bor ou le r_frig_roteur o vin ovont

le nettoyoge ou toute intervention.

Lesr@porotionsdoivent @trefoites por un technicien

quolifi&

For Monogram local service in your area, call

1.800.444.1845

For Monogram service in Canada, call

1.800.561.3344

For Monogram Parts and Accessories, call

1.800.626.2002.

GROUNDING THE DOUBLE-DRAWER

REFRIGERATOR

IMPORTANT - Pleosereod corefully.

FOR PERSONAL SAFETY,THIS APPLIANCE MUST
BE PROPERLY GROUNDED.

The power cord of this opplionce is equipped with
o three-prong (grounding) plug which motes with o
stondord three-prong (grounding) wall receptocle to
minimize the possibility of electric shock hozord from
this opplionce.

Hove the woll outlet ond circuit checked by o quolified
electricion to moke sure the outlet is properly grounded.

Where o stondord 2-prong woll outlet is encountered,
it is your personol responsibility ond obligotion to hove it
reploced with o properly grounded 3-prong woll outlet.

www, monogram,com

DO NOT, UNDER ANY
CIRCUMSTANCES, CUT

OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG
TO CONNECT THE REFRIGERATOR
TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION
CORD WITH THIS APPLIANCE.

CONTENTS

Important Information

Tools, Hardware ........................................3

Parts Required..............................................S

Coring for Your Stainless Steel ............S

Design Guide (for ZIDS240}

The Installation Space..............................4

Product CleQrances....................................4

Side-bg-Side Installotions ......................4

Important Information

Design Guide (for ZIDI240}

The Installation Space..............................5

Product CleQrances....................................5

Side-bg-Side Installotions ......................5

Installation Instructions

Step 1, Remove PQckQging....................6

Step 2, Install Custom 3/4"

Drawer Panels and Handles

(ZIDI240 model onlg) ............................6, 7

Step 3, Level ..................................................7

Step 4, Connect Power ............................8

Step 5,Slide Product into Cutout ........8

Step 6, Set Temperature Controls ......8

ZIDI240 MODEL ONLY

PARTS REQUIRED

• Custom hQndles

• Overlag pQnels

• SpQcer pQnels

• Backer pQnels

• Screws

PARTS SUPPLIED

• Dower side trims

• OptionQI block or
stainless steel toekick

TOOLS REQUIRED

• Adjustable wrench

• CQrpenter's glue (ZIDI240 model onlg)

• Screwdriver (ZIDI240model onlg)

CARING FOR YOUR STAINLESS STEEL

• Before installQtion or first use, we stronglg advise gou
polish the stainless steel exterior and handles with a
commerciallg available stainless steel cleQnersuch
as Stainless Steel Magid'. To preserve and protect
the fine finish, we also stronglg advise thQt gou
applg stainless steel cleQner monthlg.