GE ZGU36L4RHSS, ZGU36N4RHSS User Manual

ZGU36N4RHSS (Natural Gas)

26-5/8"

12"

1/2"

8-7/16"

Countertop
Level

22-3/4"
23-1/4"

4" to Center Line

of Gas Inlet

on the Left

Allow Additional Clearance

Below the Burner Box for

Gas Connections

2-1/2"

Cabinet Face - Projecting Control Panel

Cabinet Face - Flush Control Panel

1/2"

12" High
Backsplash

22"
High
Back

22" High
Backsplash
with Shelf

8"

2-1/2"

1/2"

35"

22-3/4"

M

o

n

og

r

a

m

F

R

O

N

T

R

E

A

R

F

R

O

N

T

R

E

A

R

F

R

O

N

T

R

E

A

R

26-5/8"

8-7/16"

35

-7/8

"

Allow Clearance

Below the Burner Box

for the Regulator and

Gas Connections

26-5/8"

12"

1/2"

8-7/16"

Countertop
Level

22-3/4"
23-1/4"

4" to Center Line

of Gas Inlet

on the Left

Allow Additional Clearance

Below the Burner Box for

Gas Connections

2-1/2"

Cabinet Face - Projecting Control Panel

Cabinet Face - Flush Control Panel

1/2"

12" High
Backsplash

22"
High
Back

22" High
Backsplash
with Shelf

1/2" Above Adjacent
Countertops.

Front Projects Outward as Shown
From Standard Depth Cabinets.

Cooktop

26-5/8"

12"

1/2"

8-7/16"

Countertop
Level

22-3/4"

23-1/4"

4" to Center Line

of Gas Inlet

on the Left

Below the Burner Box for

Gas Connections

2-1/2"

Cabinet Face - Projecting Control Panel

Cabinet Face - Flush Control Panel

1/2"

12" High
Backsplash

22"
High
Back

22" High
Backsplash
with Shelf

1/2" Above Adjacent
Countertops.

Front Projects Outward as Shown
From Standard Depth Cabinets.

Cooktop

1/2" Above Adjacent
Countertops.

Front Flush With Cabinets - a Minimum
of 25-3/4" Cabinet Depth Required

Flush With Cabinet Front

Cooktop

ZGU36L4RHSS (Liquid Propane) – GE Monogram 36" Professional Gas Cooktop with

4 Burners and Grill

Dimensions and Specifications (in inches)

Professional cooktops offer a number of choices in size and
cooktop configurations.

ZGU36N4RHSS

with 4 burners and grill (Order ZGU36L4RHSS for LP gas)

Product Dimensions and Clearance

A 36"- or 42"-wide professional vent hood with a minimum 600 CFM
is recommended for installation over this cooktop.

Specification Revised 10/05

130444

Clearances between cooktop and side
wall or combustible material must be
at least 12" on each side.

Install Options

• The cooktop stainless steel surface will be 1/2" higher than
adjacent countertops.

• In 24"-deep cabinets, the front of the cooktop will be
approximately 1-7/8" beyond the front of the countertop.

NOTE: These cooktops require 8" free space below the countertop
to house the cooktop burner box. Allow additional clearances below
the burner box to install the regulator and make house gas supply
connections. Use a 90° elbow to route the gas connections and limit
interference with drawers or other cabinetry features.

For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
GEAppliances.com or call GE Answer Center®
service, 800.626.2000.

ZGU36N4RHSS (Natural Gas)

7"

2"

Locate gas
inlet on
back wall
or on floor
2" from
back wall

16"

22" High
Backsplash
with Shelf

26-5/8"

12"

36" Min.

to Combustibles

9-1/2"

3/4"

22"

12" High Backsplash

36" Min.

to

Combustibles

0" Clearance

12" Min. to Combustibles or
0" Min. to Combustibles
with 12" or 22" Backsplash

ZGU36L4RHSS (Liquid Propane) – GE Monogram 36" Professional Gas Cooktop with

4 Burners and Grill

Backsplash Accessories

The cooktop requires a 12" minimum clearance to a vertical
combustible surface at the rear. A backsplash is required
for installations with less than 12" clearance. The following
backsplash accessories are available, or a custom,
non-combustible backsplash can be used.

ZX12B36HSS, 12" backsplash
ZX22B36HSS, 22" backsplash with warming shelf

Backsplash with Warming Shelf

All Monogram® Professional Hoods feature infrared warming lights.
The 22"-high backsplash accessory with warming shelf is a perfect
complement when installed with the tapered or straight-sided hoods.

• Restaurant-Style Professional Hoods are shipped with a stainless
steel backsplash and warming shelf.

Side View with a Backsplash

Advance Planning for 36"
Professional Cooktops

Professional cooktops offer a number of choices in size and cooktop
configurations.

• All Professional cooktops are factory set for natural or liquid
propane gas. The correct model should be ordered for the
installation situation.

Note: Conversion kits (WB49X10132, Nat. to LP and WB49X10133,
LP to Nat.) are available if the wrong gas type was ordered. High
Altitude kit, WB49X10130, is also available. The kits must be installed
by a qualified service technician at additional cost.

Electrical Requirements

Cooktops must be supplied with 120V, 60Hz, and connected to an
individual, properly grounded branch circuit protected by a 15 amp
circuit breaker or time-delay fuse.

Specification Revised 10/05

130444

Gas Supply

• Natural gas models are designed to operate at 5" water column
pressure. A regulator is required at the natural gas source to provide
maximum of 7" water pressure to the cooktop regulator.

• The liquid propane models are designed to operate at 10" water
column pressure. A regulator is required at the LP source to provide
maximum of 14" water pressure to the cooktop regulator.

For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
GEAppliances.com or call GE Answer Center®
service, 800.626.2000.