Page 1
Owner's
Manual
Automatic
Icemaker
ZDI15
ZDIS15
Monogram:
Page 2
Consumer Infbrmation
Icemaher
Intrvduetion
Contents
Be[bre
using your
ieemaher
Your new Monogram icemaker makes an eloquent statement of style, convenience and
kitchen planning flexibilit}. Whether you chose it fbr its purity of design or the assiduous
attention to detail, you'll find that your Monogram icemaker's superior blend of flwm
and _unction will delight you for years to come.
Tile infl)rmation on the fl)llowing pages will help you operate and maintain your icemaker
properly.
If you have any other questions, visit our Website at: ge.com
(;are and Cleaning .................. 11-13
Consumer Services ..................... ] 5
Controls and Features .................. 8, 9
Important Phone Numbers .............. 15
Model and Serial Numbel_ ............... 2
Operating Instructions .................. 10
Read this manual carefulb:. It is intended
to help you operate and maintain your new
icemaker properly.
Keep it handy fl)r answers to your questions.
Problem Solver . ....................... 14
Product Registration ..................... 2
P.epair Service .......................... 3
SafeW Instructions ..................... 4-7
_'LuTimty ....................... Back Cover
If you don't understand something or need
more help, there is a list of toll-fl'ee consumer
service numbers included in tile back section
of this manual.
OR
-Wd te
down the
model &
serial
;r_u _ bers
You'll find them on a label on tile right wall
of the ice storage bill.
These numbers are also on the Consumer
Product Ownership P.egistration Card packed
separately with your icemaker.
Visit our Website at: ge.com
Before sending in tiffs card, please write these
numbers here:
Model Number
Serial Number
Use these numbel_ ill any correspondence or
service calls concerning your icemaker.
Page 3
(/you
received a
damaged
icemaker
Immediately contact the dealer (or builder)
that sold you the icemaker.
If you
rleed
service
To obtain service, see tile Consumer Services
page in the back of this manual
We're proud of our service and want you to be
pleased. If tot some reason you are not happy
with the sexwice you receive, fbllow these steps.
For customers in the USA:
F]P, ST, contact tile people who serviced your
appliance. Explain wily you are slot pleased.
Ill most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details--including your phone numbes_-to:
Managei; Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
For customers in Canada:
FIP.ST, contact tile people who serviced your
appliance. Explain wily you are not pleased.
Ill most cases, this will solve tile problem.
NEXT, if you are still slot pleased, write all tile
det;dls--inrluding your phone nmnbes=-to:
Manager, Customer Relations
Camco Inc.
1 Factory Lane, Suite 310
Moncton, N.B. El(: 9M3
Page 4
IMPORTANT SAFETY INSTRUCTIONS
ILr:AD AND SAVE 77qESE INSTRUCTIONS
Before it is used, the icemaker must be
properly installed and located as described
in this manual.
A WARNING: Toreducethe
risk of fire, electricaJ shock or injury
when using your icema_ker, follow basic
precautions including the following:
, Never allow children to operate, play with
or crawl inside the icemaker.
Never clean icemaker parts with flammable
fluids. The fumes can create a fire hazard
or explosion.
" Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes
can create a fire hazard or explosion.
, Be sure your icemaker is properly installed
and grounded by a qualified technician in
accordance with the Installation Instructions.
Do not attempt to repair or replace aJ_y
part of your icemaker unless it is specifically
recommended in this manual. All other
servicing should be referred to a qualified
technician.
Unplug the icemaker or disconnect power
before cleaning, servicing or changing the
light bulb. Failure to do so can result in
death or electrical shock.
It is your responsibility to be sure your
icemaker:
- has been installed where it is protected frtm/
tile elements.
- is located so that tile front is m)t blocked to
restrict incoming or discharge air flow.
- is cmmected onl} to tile proper kind of
outlet, with the correct electric suppl} and
grounding. A 115 volt, 60 Hz, 15 amp tused
electrical supply is required.
NOTE: Time dela} fuse or circuit breaker
is recoi-aI-a ended.
- is not used b} an}one tmable to operate
it properl}.
- is used onl} to do what icemakers are
designed to do.
- is properl} maintained.
Page 5
IMPORTANTES INSTRUCTIONS DE SECURITE
LIt £ ET CONSER VI 2R CES INSTRUCTIONS
Avant son utilisation, la machine a glagons doit
&tre bien install_e et situ_e selon la description
daaas ce manuel.
AVERTISSEMENT :
Pour r_duire les risques d'incendie, de
choc &lectrique ou de blessure lors de
Futilisation de la machine h glaqons, stfivre
les pr&cautinns fondamentales, y compris
les snivantes :
, Ne jamais laisser les enfants utiliser,
employer comme jouet ou p6n6trer dams la
machine/_ glacons.
Ne jamais nettoyer les pibces de la machine
glaqons avec des fluides inflammables.
Les 6maaaations peuvent cr6er tm risque
d'incendie ou d'explosinn.
Ne pas entreposer ni utiliser de Fessence
ou d'autres vapeurs et liqnides inflammables
dans le voisinage de cet appaaceil m&nager
on de tout autre appaaceil. Les &manatinns
peuvent cr&er un risque d'incendie ou
d'explosion.
S'assurer que la machine a glagons est bien
install_e et reli_e a la terre par un technicien
qualifi6, et conform6ment attx instructions
d'inst a]lation.
Ne pas essayer de r_parer ou de remplacer
une pibce de votre machine h glagons
moins de recommandations sp&cifiques dans
ce manuel. Tout autre besoin de service doit
6tre soumis h tm teclmicien quaJifi&
" D&brancher la machine a glaqons on
d&connecter le courant _lectrique avant
de la nettoyer, de l'entretenir ou de changer
l'mnpoule d'6clairage. L'omission d'observer
ces pr6cautions peut causer tm d6cbs ou
tm choc 61ectrique.
, Vons avez la responsabilitO de vous assurer
que la machine a glacons :
- a _t_ install_e off elle est protegee contre
les intemp_ries .
- est situ0e de sorte que le devant n'est })as
obstru_e pour restreindre l'arriv6e ou la
sortie du com'ant d'air.
- est connect0e seulement au type appropsi_
de prise de courant avec une alimentation
61ectrique correcte et une liaison fi la terre.
Line Mimentation 61ectrique de 1 1!-'5V; 60
Hz, et fusible de 175A est requise.
REMARQUE : Les fusibles temporis& ou
disjoncteurs de circuit sont recommand_s.
- n'est })as utilis_e par quiconque ne peut
fhire tkmctionner l'appareil d'une mani_re
appropfi_e.
- est utilisOe seulement pour accomplir
ce que les machines a glacons sont destinOes
_'lflmrnir.
- est soumise 5 un entretien appropri_.
Page 6
-tkAVERTISSEMENT ! non- p ct(,_ instructions peut causer la mort, un incendie ou lm
choc dlectrique.
HOW TO CONNECT ELECTtUCITY
Do not, under azay circumstazaces, cut or remove
the third (ground) prong from the power cord.
For personal safety, this appliance must be
properly grounded.
Tlle power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall
outlet to minimize the possibility of electric
shock hazard h'om this appliance.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 9-prong wall outlet is
encountered, it is vo,.lr, personal responsibility
and obligation to haxe it ieplaced xdth a
properly grounded 3-prong wall outlet.
RA CCORDEMEN7 EIda;C7'RIQUE
Ne coupez ni retirez en aucun cas la troisi6me
broche (mise a la terre) de la fiche du cordon
d'aJimentation. Pour votre sScuritS, cet appareil
dolt 6tre correctement mis a la terre,
Le cordon d'alimentation de cet appareil est
mtmi d'tme fiche a 3 bIoches (raise a la teHe)
qui se blanche darts une prise mural ordinaire
h 3 alv&)les (raise _'lla terre) pour rg_duire au
minimum les risques du chocs (_lectriques.
Faites examiner la prise de com'ant et le circuit
par un (_lectricien qualifi6 pour vous assurer
que la prise est correctement raise a la terre.
Si la prise murale est du t)pe standard a 2 alv_oles,
i] urns incombe de la fidre _emplacer par role
prise fi 3 aN(qoles correctement raise fi la terre.
La machine fi glacons dolt t(mjours 6tre
b_anch(4 darts sa propre prise de com'ant,
dont la tension nominale est identique
5 celle indiqug_e sin" la plaque signalg_tique.
Tile icemaker should alwa_:s be plugged into
its own individual electrical outlet which has a
voltage rating that matches tile rating plate.
This provides tile best per%rI_lance and also
prevents overloading house wiring circuits which
could cause a fire hazard ti'om overheated wiies.
Never tmph_g your icemaker by pulling on the
power cord. Always grip plug firmly and pull
straight out fi'om tlle outlet.
Repair or replace immediatelv all power cords
that have become ti'aved or otherwise damaged.
Do not use a cord that shows ctucks or abrasion
damage along its length or at either end.
When moving the icemaket, be careful not
to roll over or damage tile power cord.
Cette prg_caution est recommand(_e pour
garantir un rendement optimum et (_viter
une surcharge des circuits (_lectriques de la
rg_sidence, ce qui pom'rait crg_er un risque
d'incendie par sm'schaufle des ills.
Ne dg_branchezjamais la machine :75glac(ms
en tirant le cordon d'alimentation. Saisissez
termement la fiche du cordon et tirez droit
pour la retirer de la prise.
R_parez ou remplacez immg_diatement tout
cordon efliloch(q ou endommag& N'utilisez
pas tm cordon tbndill(4 ou pr(qsentant des
signes d' usm'e.
Lorsque vous dg_placez votre machine 5
glacons du i//{lr_ fidtes attention de ne pas la
thire rouler stir le cordon d'alimentation afin
de ne pas l'endommager.
EXY 2NSION CORDS
Do not use an extension cord with this
appliance.
RALLON(;ES
6
N'utilisez pas de rallonge avec cet appareil.
Page 7
DANGER: tUSK OF CHILD ENTRAPMENT
Child entrapment and suffocation are not
problen_s of the past, Junked or abandoned
refl'igeration products are still dangerous..,
even if they will sit tot "just a tew days." If you
are getting rid of wmr old appliance, please
tollow these instructions to help prevent
accidents.
g eto re YOtl Th row Away You r O1d
Refl'igeration Product:
• Take off the dome.
• I,eave the shelves in place so that children
may not easily climb inside.
DANGER! t SQUES POUR LES ENFANTS
I,es enfimts pris au pi&ge ou morts d'asphyxie
sont to/ljom's d'actualit_, i,es appareils de
r_fl'ig&'ation abandon_s sont toujours
aussi dangereux, in&me si on n'attend que
"quelquejours" pour s'en dObarasser. Si vous
ne gardez pas votre ancien appareil, veuillez
suiw'e les directives ci-dessous afin de
prOvenir les accidents.
Avant de vous dObarasser de votre vieux
appareil de r_fl'ig_ration:
• DOmontez les portes.
• I,aissez les clavettes en place afin d'empOcher
les enfimts de grimper _'ll'intg_rieur.
Pd 2FRIGERANTS
All refl'igeration products contain refl'igelants,
which trader tbderal law must be removed prior
to product disposal. If you are getting rid of an
old refl'igeration product, check with tile
company handling tile disposal about what
to do.
Pd'2FRIGERAN7 S
Tousles appareils de r_fl'ig&'ation contiennent
des rOfl'ig&'ants qui, contorm&nent aux lois
tiadOrales, doivent _tre enlev_s avant toute
_limination de l'appareil. Si wins wins
d_barrassez de vieux appareils de r_ti'ig_ration,
v&'ifiez, aupr_s de la soci_tO qui s'occupe de
leur Olimination, ce que vous devez taire.
Page 8
Gontrols and Features
I_emakcr
Set controls
IMPORTANT: Do not remove ally permanent
instruction labels inside your icemaker or the
Tech Sheet that is fastened behind tile lower
access panel.
* Remove tape and any labels t_'om vom"
icemaker befi)re using (except tlle model
and serial number label).
To remove any remaining tape of glue, rub
the area briskly with your thumb. Tape or glue
residue can also be easily removed by robbing
a small amomlt of liquid dish soap over the
adhesive with your fingers. Wipe with warm
water and oh%
Atter xou remove all of tlle l)ackaging, ,
materials, clean the inside of }our icemaker
before usin * it
1. To start the m)rmal ice making c'_cle,
select ON.
2. To stop icemaker operation, select OFE
* Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive
cleaners to remove tape or glue. These
products can damage the surthce of your
icemaker. For n/ore in_k)ri//ation, see
lmporta_zt Sail4), In,strlu:tio_,s.
See tlle cleanino instructions in Car_ and
Cleatd rig'.
NOTE: Tlle CI,EAN setting is used _dlenexer
solutions are circulated throu_*h tile icemaker
for cleaning. See Care and Cleatdt_g:
CLEANING
Page 9
b?atures o/your
icemaher
Controls and Features
I_emak_,r
Light switch
Control panel
Cutter grid cover
Water reservoir
Ice retainer
baffle
Loweraccess
panel
Cleaningcycle
light
Ice level sensor
Model & serial
numbers
Magnetic
door catch
Page 10
Operating Instructions
I_ emai_ er
HO_U _O_T
icemahev
When you first start v(mr icemaker, the water
rese,xoir will fill and the system will rinse itself
betore starting to make ice. The rinsing
process takes about five minutes.
Under normal operating conditions, the
icemaker will cycle at preset temperatm'es.
The ice level sensor located in the ice storage
bin will monitor the ice levels.
IMPORTANT
* If the water supply to the icemaker is
turned old; be sure to set the icemaker
control to OFF. Drain the water reserxoir
and leave the icemaker door open to allow
it to dry completely.
* Every time the icemaker is turned off, you
MUST cleaJa the icemaker system with Nickel
Safe Ice Machine Cleaner. See Care and
Cleanin_lcemaker system section for instructions.
* The icemaker is designed to make clear ice
fi'om the majority of water sources on a daily
basis. If vom" results are unsatisthctor> your
water may need to be filtered or treated.
Making Ice
1. _lter is constantly circulated over a fi'eezing
plate. As the water fi'eezes into ice, the
minerals in the water are rejected. This
produces a clear sheet of ice with a low
lnill el'_l] COlltent.
2. When the desired thickness is reached, the
ice sheet is released and slides onto a cutter
grid. The grid divides the sheet into
individual cubes.
3. The water containing the rejected minerals
is drained alter each t/"eezing cycle.
4. Fresh water enters the machine fl)r the next
ice making cycle.
5. Cubes thll into the storage bin. When
the bin is lull, the icemaker shuts off
automatically and restarts when more ice
is needed. The ice bin is not reti'igerated
and some melting will occm'. The amount
of melting varies with room temperature.
NOTE: As the room and water temperatures
vary, so will the amotmt of ice produced and
stored. This means that higher operating
temperatures result in reduced ice production.
10
Page 11
Unplug the icemaker before cleaning.
(;are and (;leaning
I_emak_,r
Caring
.[br your
icemaher
Exterior
SU _/(I CeS
The icemaker MUST be regularly inspected
and cleaned to keep it operating at peak
efficiency. Every time the icemaJ<er is turned
off, you MUST clean the icema_ker system with
Nickel Safe Ice Machine Cleaner. Nickel Safe
Ice Machine Cleaner by Nu Calgon is available
at appliance repair shops, or through GE Parts
and Accessories. Order part number
WX08X42870. In the U.S.A., call 800.696.2002
or visit ge.com. In Canada, call 1.888.880.3030.
IMPORTANT: Do not fl_llow the cleaning
directions that are printed on tile cleaner
bottle. Do not use tile suggested aI/lounts, btlt
use tile entire bottle to clean tile unit. See
Car_ and C&anio,_lcemaher system section.
Door handles and trim--Clean with a cloth
dampened with soapy water. Dry with a sott
cloth.
Keep the outside clean, Wipe with a clean
cloth lightly dampened with mild liquid dish
detergent. Dry with a clean, sott cloth. Do not
wipe the icemaker with a soiled dish cloth or
wet towel. These may leave a residue that can
damage the finish. Do not use scom'ing pads,
powdered cleaners, bleach or cleaners
containing bleach because these products
can scratch and damage tile finish.
Both the ice making system and tile air cooled
condenser need to be cleaned regularly. Tile
minerals rejected fl'om the circulating water
during tile fl'eezing cycle will eventualh' form
a hard scaly deposit in tile water system which
prevents a rapid release of the ice fl'om tile
fl'eezing plate.
Clean tile ice and water system periodically
to remove mineral scale buildup. Frequency
of cleaning depends on water hardness.
With hard water (15 to 20 grains/gal. [4 to 5
grains/liter]), cleaning may be required as
fl'equently as every (i months.
Stainless steel--Regularly clean and polish tile
stainless steel door panels and handles (on
some models) with a commercially available
stainless steel cleaner such as 5"tahdess 5'ted
M(l_ic >'to preserve and protect tile fine finish.
StaioMs St_d Mag'k is available through
GE Parts and Accessories, 800.62(;.2002,
or ge.com. Order part number WX 10X 15.
Do not use appliance wax or polish on the
stainless steel.
11
Page 12
Care and Cleaning
I_emakcr
1. Push the selector switch to OFE
2. X_'ait 5 to 10 minutes fi)r the ice to fall into
the storage bin. Remove all ice fl'mn the
storage bin.
3. Unscrew the drain cap fl'om the bottom of the
water reservoir located inside the storage bin
as shown. _Mlow the water to drain completely:
Draincap Waterreservoir
4. Replace the drain cap,
5. Use the entire 16 oz, bottle of Nickel Safe
Ice Machine Cleaner rather than the
amount suggested on the bottle. Follow all
safety precautions on the bottle. Pour one
bottle of solution into the water reservoir,
Fill the bottle twice with tap water and pour
it into the water reservoir,
Nickel Safe Ice Machine Cleaner by Nu Calgon
is available at appliance repair shops, or through
GE Parts and Accessories. Order part number
WX08X42870. In the U.S.A., call 800.525.2002
or visit ge.com. In Canada, call 1.888.880.3030.
6. Push the selector switch to CI.EAN.
The light will turn on, indicating that the
cleaning cycle is in process.
CLEANING
7. When the indicator light turns off
(approximately 45 minutes), the cleaning
cycle is complete. During the cleaning cycle,
the svstem will both clean and rinse itself.
8. After the cleaning cycle is complete, remove
the drain cap from the water reservoir to see
if any cleaning solution, green in color, is leli
in the water reservoir. If cleaning solution
drains fl'om the water reservoir, you should
tun the clean cycle again.
NOTE: Severe scale buildup may require repeated
cleaning with a fl'esh quanti V of cleaning solution.
9. Push the selector switch to ON to resmne
ice production.
CoTldgTisgr
For best perJ()rmance, brush or vacuum lint
and dirt fi'om the condenser once a year.
A dirty or clogged condenser:
* Prevents proper airflow.
* Reduces ice making capacity.
* Causes higher than recommended operating
temperatm'es which may lead to component
fidlm'e.
1. Unplug the icemaker or disconnect power.
2. Remove the 2 screws in the lower access
panel and the 2 screws fi'om the base grille
area of the ti'ont panel support, Pull torward
to remove the lower access panel,
3. Pull the bottom ti)rward allcl then pull down
to reI//ove the lower access pallel.
U
4. Remove dirt and lint from the condenser
fins and the trait compartment with a brush
attachment attached to a _;icl./(/I// cleaner.
5. Replace the lower access panel using the
4 screws,
6, Plug in the icemaker or reconnect power.
12
Page 13
(;are and (;leaning
I_emaker
Light bulb
* Dlacement
D cation
and moving
Tile icemaker has a light bulb ill tile top of tile
storage bill. To replace it, open the bin door
and fl)llow these instructions:
1. Unplug tile icemaker or disconnect power.
2. Remove the 3 screws that hold the cutter
grid cover ill place. Reach behind tile
control panel and pull tile light bulb down.
3. Replace with a 12-w_lt wedge base-type bulb
(automotive #917). I,ocate the light bulb
receptacle at tile top behind tile control
panel. Mign the flat edge of tile light bulb
with tile receptacle and snap the bulb
into place.
4. Replace the cutter grid cover with the
3 screws.
To shut down the icemaJcer:
1. Unplug tile icelnaker or disconnect power.
2. Ren/ove all ice fl'oln the storage bin.
3. Sh tit ot1 tile water supply.
4. Relnove the 2 screws in the lower access
panel aim tile 2 screws fl'oln tile base grille
area of tile fl'ont panel support. Pull torward
to rei/love tile lower access panel,
U L
5. Plug in tile icemaker or reconnect power.
5. Disconnect tile ildet and outlet lines to
water wdve. Allow these lines to drain and
then recolmect to the wdve.
6. Replace tile lower access panel aim screws.
Drain water fl'oln water reservoir bv
relnovii_g the drain cap. Also, remove water
froln drain line. I,eave tile door open
to allow the icelnaker and water reservoir
to dry out completely:
7. Betore using again, clean the icelnaker
aim storage bin.
IMPORTANT: Every time the icemaJ_er is
turned off, you MUST clean the icemaJ_er
system with the Nickel Safe Ice Machine
Clemmr. See Care and Cleaning--Ieemaher
system section for instructions.
8. Plug in the icemaker or reconnect power.
NOTE: All components of tile icemaker are
perlnai_ently lubricated at tile factory. They
should not require any additional oiling
throughout tile nolmal lite of tile umchine.
J_e_TerSe
Osmosis
system
IMPORTANT: Tile perfimnance of tile
icelnaker inav be affected when colmected to
a Revei_e Oslnosis svsteln. An RO systeln inav
also reduce water pressure aim altect tile fill
cycle, which is dependent on tilne aim flow.
The reduced water pressure (less than 90 psi)
Inav cause tile reservoir not to fill and flush
properly durii_g tile ice umking cycle.
Do not use copper tubing when the icemaker is
cmmected to a Reverse Osmosis water system,
13
Page 14
PROBLEM POSSIBLE CAUSE
The Problem Solver
l_emaher
Questions ?
Use this
problem solver, t
ICEMAI_2R DOES NOT • Power cord is not plugged into a live outlet.
OPERATE • The control is set at OFF.
• The fllse is blown/circuit breaker is tripped. Replace fllse oi"
reset the breaker.
ICE CUBES HAVE
ODOR/TASTF
ICEMAKER IS ON, BUT
DOESN'T PRODUCE ICE
• High mineral content in the water supply: Water lnaV need to
be filtered or treated.
• Food items stored in ice bin. Do not store }111vfoods in the
ice bin.
• Packaging materials were not removed. Make sure that all
packaging materials were removed at the time of installation.
• Ice storage bin needs cleaning.
• Scale has built up in the icemaker. If there is white scale
buildup in the icemaker's water {1i"fl'eezing system, you should
clean the icemaker. See Care and Cleanint_=-I(enzal_er 5)'stem.
• The control is set at OFF.
• X*Vater supply is not connected.
• Condenser is dirty: Dirt or lint may be blocking the airflow
through the condenser. See C(,',_ and Cleaning_-Con(hm,_er.
• Scale has built up in the icemaker. If there is white scale
buildup in the icemaker's water {1i"fl'eezing system, you should
clean the icemaker. See C(,,;"eand (leanin_=-I(enzal_er 5)'stem.
• Check fin" a kink in the drain hose fl'om the ZPK1 Drain
Pure I) Kit to the house drain.
• Water supply has been interrupted.
• Have a phunber check for a clogged water valve.
• Ro{nn temi)erature is colder than n{mnal. ]_o{nn temi)erature
11/ust be above 55°F ( 13 °C). Otherwise, biil th era/osta t inav
sense cold i"{)oi11tempera ture a 11(1shut off even though the bin
is not flfll of ice. Mso, unit may not restart once it does shut off.
ICEMAKER IS ON, BUT
PRODUCES LITTLE OR
NO ICE
ICEMAKER PUMPS
CONTINUOUSLY, BUT
PRODUCES NO ICE
14
• Condenser is dirty, Dirt or lint may be blocking the airflow
through the condenser. See Care and Ch<anint{_-Conden,se*:
• Scale has built up in the icemaker. If there is white scale
buildup in the icemaker's water or fl'eezing system, you sh{mld
clean the icemaker. See Care and C[¢anbN=-Icemaker @'stem.
• _,VKer is leaking fl'om the water reservoir because the drain cap
is not secure, Make sure the drain cap is securely tightened,
Relier to illustration in Can, and Cleanintl_lg cnza/_er5)',slemsection.
• U()()II/ teillpei'attli'e is too hot. ROOIII teilll)ei'attlFes (if i/loi'e
than 90°F (32°C) will reduce ice production.
The ice sheet is trapped {111the cutter grid. Uni)lug the
icemaker or disconnect power. Remove the cutter grid cover
and move the ice sheet to the cutter grid. Reter to illustration
in Feature,_ (?/your icemaker section. Reinstall the cutter grid
cover and reconnect power. Turn {111the icemaker. The
icemaker will reset itself and start a new cvcle after flushing
water through the system, NOTE: Follow the directions in the
C(,',_ and Cleanint{_lgenza/¢er 5)'stem section to clean with the
Nickel Sate Ice Machine Cleaner.
Page 15
Consumer Services
I( emaker
With the purchase of your new Monogram appliance, receive the
assurance that if you ever need information or assistance from GE,
we'll be there. All you have to do is call tolL fre!!
GE Answer
Center _
In the USA:
800.626.2000
In-Home Repair
Service
In the USA:
800.444.1845
In Canada:
1.888.880.3030
For Customers
With Special
Needs...
In the USA:
800.626.2000
Whatever your question about any Monogram major appliance, GE Answer Center <)
infl)rmation service is available to help. Your call--and your question--will be answered
promptly and courteously. And you call call any time. GE Answer Center C:service is open
24 hours a day, 7 clays a week.
OR
Visit our \'\Tebsite at: ge.com
In Canada, call 1.888.880.3030.
AGE consmner service protessional will provide expert repair service, scheduled at a time
that's convenient tor you. Many GE Consmner Service company-operated locations offer
you ser',ice today or tomorrow, or at your convenience (7:00 a.m. to 7:00 p.m. weekdays,
9:00 a.m. to 2:00 p.m. Saturdays). Ore" thctor_trained technicians know your appliance
inside and otlt--so lnost repairs can be handled in just one visit.
GE offers Braille controls flw a _:u'ietv of GE appliances, and a
brochure to assist in planning a barrie>li'ee kitchen flw pe_ons with
limited mobility.
Consumers with impaired hearing or speech who have access
to a TDD or a conventional teletyi)ewriter may call 800.TDD.GEAC
(800.833.4322) to request infl)rmation or service.
Service Contracts"
In the USA:
800.626.2224
In Canada:
1.888.880.3030
Parts and
Accessories
In the USA:
800.626.2002
In Canada:
1.888.880.3030
You can have tile secure teeling that GE Consumer Service will still be there after your
warranty expires. Purchase a GE contract while yore" warranty is still in eL_bct and you'll
receive a substantial discount. With a multiple-year contract, you're assured of future
service at today's prices.
Individuals qualified to service their own appliances can haxe parts or accessories sent direcflx
to their home. Tile GE lXU_s s}stem provides access to oxer 47,000 parts...and all GE Genuine
Renewal Parts are full} warranted. VISA, MasterCard and Discover cards are accepted.
User maintenance instructions contained in this manual cover procedures intended to be
performed by any user. Other servicing generally should be referred to qualified service
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.
15
Page 16
YOUR MONOGRAM ICEMAKER WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase
date is needed to obtain service under warranty.
WHATIS
C0 VEPdED
From the Date
o/ the O_inctl
Purchase
WHAT IS NOT
COVERED
LIMITED ONE-YEAR WARRANTY
For oue )Tar tl'olll da|e of original 1)rex hase, we _ill provide, fl'e( of charge, paris ai/d ser\ice labor in )o/r
home lo rq)air or replace an) part:!filmicemaker lhat fitils be( anse of a mmmth(luring det_ (1.
LIMITED FIVE-YEAR WARRANTY
For fixe _ears. from date of origimd lmrchase, _e will t)roxide, fi:e_ ot charg(, i)arts aml serxi(e labor
i_/_,X)/lr h(xme [(x repair or replace an) part q/'llu_ _(,aled icemahing s3_tem (the (omt)ressor, conde_/ser,
eval)oralor and all comlecting robing) lhal t_fils because of a mmmt_cmring deti_ct.
This warramv is extemled to tile o_-igJnal lmrcbaser amI any surce_ ding owner _i)r prodmts purchased lor
ordinary hoxne use ill th_ 48 mainland states, Itawaii, Washington, D.C. or Canada./f tile product is located
in an m;ea where service b} a (;E Authorized Servicer is not m ailable, you m_a. be responsible lor a trip
charge or you m_l}. be r_ quired to bring thi product to an Amhofized (;E Service location tor service. /n
Alaska the warranty is tile same except that it is [,IMfI'ED becm_s_ you must pay to ship the 1)ro(hict to the
service shop or Ior the s(rvice tecinlician's travel costs to your hol/le.
All warranty serxice will be provi(h d b\. our Factory Service Centers or b\. our authorized Customer (;ar_ "'
servicers dm:ing nornml working hirers.
Shcnfld your appliance need service, din:lug warramy period or b(yomt, in the U SA call 800.444.1845. /n
Canada: 888.880.3030. Please haw your se_-ial lmmber amt model munber a_ailable when calling lot service.
* Service trips to your home to teach yon how
to use the product.
* Replacement of house fuses or resetting of
circuit breakers.
* Damage to the product caused by accident, fire,
floods or acts of God.
* Failure of the product if it is used for other than
its intended purpose or used commercially.
* Damage caused after delivery.
* Improper installation, delivery or maintenance.
If yon have an installation problem, contact your
dealer or installer. Yon are responsible for
providing adequate electrical, plumbing and
other cmmecting facilities.
* Replacement of the light bulbs, if included.
* Incidental or consequential damage caused by
possible defects with this appliance.
* Product not accessible to provide required
service.
2217403
197D7150PO01
49-60440
02-06 JR
Printed in the United States
EXCLUSION OF IMPLIED WARJ_ANJTES---Your sole and exclusive remedy is product repair as provided in ]
this Limited WmT'aa_v. An 3, implied wmT'aaties, including the implied warranties of merchantability or filness
fox" a pmqicular propose, are limited to one year or the shortest period allowed by law.
Some states/t)rovinces do not allow the ex(lusion or liufitatiou of iucidemal or consequential damages, so
tile abox( limitation or exclusion m>tv not ai)l)ly to you. This warramy gJxes }_m sl)e(ific legal fights, aml you
m_}. also hm'e other rights which xarx. ti'om state to state!i)rovince to i)roviuce. To know what your legal "
rights ar( in your state!l)ro_ince, ((msult your local or state!1)rovincial (onsmner althirs otlice or your state's
Attorney (',eneral.
Warrantor in USA: General Electric Company,
Louisville, KY 40225
Warrantor in Cmlada: Camco Inc.
GE Consumer & Industriol
Applionces
General Electric Compon U
Louisville, KV 40225
ge.com
I
I
Loading...