ZDIC150Z
GE Monogram® High-Production, Large Capacity Automatic Icemaker
Dimensions and Installation Information (in inches)
Dimensions
H 34-1/2"
W 14-7/8"
D 23-3/4"
Note:
The finished cut-out is determined by
the type of installation. Before installing,
consult installation instructions packed
with product for current dimensional data.
Warranty Information:
Limited one-year warranty, in-home
service, parts and labor.*
Limited five-year warranty, parts and
labor on the compressor, evaporator and
all connecting tubing.*
*See written warranty for complete
details.
3-1/2"
11-1/2"
34" to
34-1/2"
Water and Electrical
Supply Should Enter
From Back Wall In
Shaded Area.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
24"
Min.
9"
*15"
* 16-1/2" with a 3/4"
thick custom panel
23-3/4" to
Door Front
Note:
The addition of a 3/4" thick front panel will result in a front to
back depth of 24-1/16".
28-1/2"
The installation of a 3/4” thick
custom panel will require an
additional 1-1/2” wide filler
strip on the hinge side.
34" min.
Adjustable
to 34-1/2"
14-7/8"
Listed by
Underwriters
Laboratories
Specification Created 8/13
120046
29-1/2"
14-23/32"
3/4"
Thick
Custom
Panel
ZDIC150Z
GE Monogram® High-Production, Large Capacity Automatic Icemaker
Dimensions and Specifications (in inches)
The Monogram® automatic icemaker can be used freestanding or as a built-in, under the countertop.
The Monogram® automatic icemaker requires a 115 Volt,
60 Hz., AC only power supply, with an individual, properly
grounded branch circuit, protected by a 15 amp fuse or
circuit breaker.
The Monogram® automatic icemaker is equipped with a
gravity drain to prevent water from flowing back into the ice
storage bin. Although a floor drain is acceptable, the ideal
installation has a standpipe with a 2" to 1-1/2" pvc drain
reducer installed directly below the outlet of the drain tube.
To achieve a custom appearance, the icemaker door accepts
3-4" custom panels (using ZIP75BB Black Kit) to coordinate or
contrast with cabinetry.
Note:
A drain pump is necessary when a floor drain is not
available. Order ZPK1 Drain Pump Kit or contact your local
plumbler for a recommended pump available in your area.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Created 8/13
120046