It is intended to help
operate
new washer properly.
Keep it handy
your questions.
If
or need more help, write (include
your phone number)
and
maintain your
you don’t understand something
Consumer Affairs
GE Appliances, Appliance Park
Louisville, KY 40225
To obtain a Spanish language
version of this book, call
GE Answer
800.626.2000
consumer information service.
for
answers to
Center@
you
Save time and money.
Before you request service . . .
check the Problem Solver
section. It lists causes of minor
operating problems that you can
correct yourself.
If you received a
damaged washer...
Immediately contact the dealer (or
builder) that sold you the washer.
Para
obtener
espafiol
GE Answer
informaci6n
te16fono
la
versi6n
de
este
manual, name a
Center@, servicio
para e]
800.626.2000.
consumidor,
en
de
Write down the model
and serial numbers.
You’ll find them on a label on
the lower left side near the front.
These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your washer. Before sending in
this card, please write these
numbers here:
Model Number
Serial Number
Use these numbers in any
correspondence or service
calls concerning your washer,
WARNING: For your safety the information in this manual must be followed to minimize
the risk of fire or explosion or to prevent property damage,
persod
injury or loss of life.
,
●
—Do not store or use gasoline or other
flammable vapors and liquids in the
any
vicinity of this or
—W~T
●
●
TO DO IF YOU
Do not try to
Do not touch any
other appliance.
S~LL
tight
any appliance.
el~tri~
switch;
GAS
do not use any phone in your building.
●
Clear the room, building or area of
tiediately
neighbor’s phone.
instructions.
●
U
you cannot reach your gas
@the fire
—Instigation and service must be performed
by a qualified
the gas
supptier.
all occupants.
All washing instruction terms in this book conform to the Care
Labeling Rule established by the Federal Trade Commission, January 1984.
If You Need Service
To obtain service, see the
Consumer Services page
in the back of this book.
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to
follow
for further help.
First, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased,
write
all
the details—including
your phone number—to:
Manager, Consumer Relations
GE Appliances, Appliance Park
Louisville, KY 40225
@your gas supplier from a
FOHOW
the gas supplier’s
supplier?
department.
instiler,
FINALLY, if your problem
is
service agency or
still
not resolved, write:
Major Appliance Consumer
Action Panel
20 North
Chicago, IL 60606
Wacker
Drive
Page 3
WARNING—To
of fire, electric shock, or injury to
A
follow basic precautions, including the following:
●
Use this appliance only for its intended purpose
as described in this Use and Care Book.
‘~<:)
o
before it is used.
Installation Instructions sheet with your
washer, you can obtain one by calling, toll
free, the GE Answer
—Properly ground to conform with all
governing codes and ordinances.
details in Installation Instructions.
—Install or store where it will not be exposed
to temperatures below freezing or exposed
to the weather.
<onnect
power supply circuit to avoid electrical overload.
—Connect to adequate plumbing and drain
facilities as described in the Installation
Instructions.
●
Turn off water faucets when the washer is not in
use to relieve pressure on hoses and valves, and
to minimize leakage if a hose or valve should
break or rupture.
-
/
%4
/&
is located so that it will not be stepped on, tripped
over or otherwise subjected to damage or stress.
persons when using your appliance,
●
This washer must be properly
installed and located in accordance
with the Installation Instructions
If you did not receive an
to a properly rated, protected and sized
●
When disconnecting this appliance
pull by the plug rather than the cord to
‘.)
avoid damage to the cord or junction of
cord and plug. Make sure that the cord
reduce the risk
Center~800.626.2000.
Follow
●
J,
~ /
soaked in, or spotted with
A
(such as wax, paint, gasoline,
cleaning solvents, kerosene, etc.) which may
ignite or explode. Do not add these substances
to the wash water. Do not use these substances
around your washer
operation.
A
can accumulate in the water heater
pipes if hot water has not been used for a period
of two weeks or longer. HYDROGEN GAS CAN
BE EXPLOSIVE UNDER THESE
CIRCUMSTANCES. So to prevent the
possibility of damage or injury, if you have not
used hot water for two weeks or more, or move
into a residence in which the hot water system
may not have been used for some time, turn on
all
hot water faucets and
several minutes before using any electrical
appliance which is connected to the hot water
system. This will allow any hydrogen gas to
escape. Since the gas is flammable, do not
smoke or use an open flame or appliance
during this process.
Q%
wait until the machine has completely stopped
before opening the lid.
Do not wash or dry articles that
\
have been cleaned in, washed in,
combustible or explosive substances
degreasers, dry-
antior
dryer during
WARNING—HYDROGEN GAS
is produced by the chemical action
within your water heater and the gas
an~or
allow
them to run for
●
Never reach into washer while it is
<<
moving. Before loading, unloading
,>
or adding clothes, push in the Cycle
Selector knob to OFF position, then
water
●
Do not repair or replace any part
of the appliance or attempt any
&
recommended in this Use and Care Book or in
published user-repair instructions that you
understand and have the skills to carry out.
servicing unless specifically
To minimize the possibility of injury:
>
●
Do not mix chlorine bleach with
&
ammonia or acids such as vinegar
rust remover. Mixing can produce a
toxic gas which may cause death.
andor
●
Close supervision is necessary if
k
,
Pa
be
appliance. Dispose of discarded appliances and
shipping or packing materials properly. Before
dismrding
remove the washer lid.
this appliance is used by or near
children. Do not allow children
to play inside, on, or with this
appliance or any discarded
a washer, or removing from service,
(continued next page)
3
Page 4
~ORTANT
SAFETY
(continued)
●
Keep dl laundry aids (such as
detergents, bleaches, fabric softeners,
m
etc.)
out of the reach of children,
preferably in a locked cabinet.
m
Observe all warnings on container
labels to
●
Keeptheareaaround and underneath
avoidpersonalinjury.
yourapphancesfreefromthe
. . .
.,
*
●
Keep the floor around your appliances clean and
accumulation of combustible materials,
such as lint, paper, rags, chemicals, etc.
dry to reduce the possibility of slipping.
c
To minimize the possibility of electric
shock, unplug this appliance from the
9
power supply before attempting any
maintenance or cleaning (except for
the removal and cleaning of the lint filter).
/
*
c
Do not
NOTE:
.
to an
the appliance from the power supply.
tamper with controls.
Turning the Cycle Selector knob
OPP
position does NOT disconnect
~STRUCTIONS
●
Do not operate this appliance if it is damaged,
malfunctioning, partially disassembled, or has
missing or broken parts, including a damaged
cord or plug.
●
Never climb on or stand on the washer top.
●
Do not wash fiberglass articles in your washer.
Skin irritation could result from the remaining
particles that may be picked up by clothing
during subsequent washer use.
●
I’t
i
A
For washer operation
●
Do not leave washer lid up during cycle.
This will stop the wash and spin action
and prevent completion of the cycle.
SAW
The laundry process can reduce the
flame
retardancy
i
such a result, the garment
of fabrics. To avoid
manufacturer’s care instructions
should be followed very carefully.
BSE
MSTRUC~ONS
HOW TO OPERATE YOUR CLOTHES WASHER
WARNING—To
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
3
@
,ixCyC,.Wa.h.r
Sorting and Loading
● Sort clothes carefully by fabric type, weight, color
and
amount of soil, according to instructions in
How to Sort Clothes section.
● Remove the
Mini-Basket tub. The underside
of the lid is a good place to put
the pan while loading or
unlaoding
Filter-Flo
clothes
reduce the risk of fire, electric shock, or injury to persons when using your
m*WniWash
‘ED1uMm@m’’”ET
pan and
water
MGE
■
SMU
~
lev8/
WasMinsn Temp.
WARM
COLD
“’’@’”o
e
Do not use Mini-Basket tub when washing regular
loads. You’ll find complete details on how and when
to use it in How to Use the Mini-Basket Tub section.
● Add measured amount of detergent. See
Detergents, Other Additives section for information
on detergents and other laundry additives.
● Load clothes
to overload. Clothes should be below retaining
ring. See How to Load Your Washer section.
Regular
Cycles
f
L
Q
into
wash basket, being careful not
,W,.. m,,,!.”r
W. HTO”OF
Heavy Du~Large Capac;V
(.()))lr()[p(inel
a
uppearan(e may vary
4
Page 5
Sorting and Loading
“
Position the
Filter-Flo pan
(continued)
on the agitator. Lint will
collect in the pan for easy removal when the wash
is finsihed.
● See How to Use the Bleach Dispenser section for
information about the bleach dispenser.
Setting the Controls
Use the Controls Setting Guide to help you make the
proper selections.
~
Select Water Level.
SMALL: Washer is less than
MEDIUM: Between 1/2 and 2/3
LARGE: Over 2/3
full.
1/2
full of clothes.
full.
MINI-BASKET: Not used for regular loads. See How
to Use the Mini-Basket Tub section.
~
Select
WasMRinse
Temperature.
Tips to Help You Select Settings
● For information on bleaches and fabric softeners,
see Other Laundry Products section.
● Close the lid. Washer will fill but not agitate or spin
lid
with the
Push
9
your selected wash setting.
Pull Cycle Selector
o
knob out to start the
washer. If you wish to
open.
Cycle
Selector knob in and turn clockwise to
~
START ,
,,
v
\
change setting after
washer has started, push
Cycle Selector knob into
9
STOP
@
stop the washer and reset to the new position.
Setting can be changed at any time.
Regular Cycles
For most cottons, linens, and
work and play clothes. Longer
wash times plus an extra deep
rinse, spray rinse and spin
provide thorough washing and
detergent removal.
Permanent Press Cycle
For loads of synthetic
andor
delicate fabrics. A cold water
cooldown helps prevent set-in
wrinkles in permanent press
shirts, blouses, dresses and
similar apparel with normal soil.
Knits Cycle
A combination of agitation
and soak provides effective
polyester knits laundering.
An
early
and long spray rinse
cools down fabrics before the
washer reaches maximum spin
speed to help prevent
Soak Cycle
Clothes activate in a soaking
agent for a short time, then the
water spins out. Washer turns
off at end of Soak Cycle—must
be reset for desired wash cycle.
What Happens in Each Setting (Approximate Minutes)
NOTES:
.
Total time includes pauses between each phase of
the cycle.
.
Total time does
vary depending on household water pressure and your
selected water level.
I
Cycle
Selector
Settings
Wash
Soak
Wash
Spin
Rinse
Spin
Total Time
I
Regular Cycles
HeavyNormalLightSoakPress
1
1
1
I
1
1913
3
3%
7
37
29%
1
3
3X
77
SoilCycleCycle
1
II
1
I
7102
3
3R3X
23%
1
Permanent
1
II
7
II
I
~/>
3X
4Z
25
Knits
Cycle
4
I
2E
2X
3
4%
23
[
wrinkie setting.
not
include water fill times.
Fill
times
5
Page 6
CONTROLS SETTING
Controls Setting Guide for different fabrics and loads
Rubber-coated
Fabrics. Vinyl.
Articles with Plastic Trim
Pillows
recon]mendeci
Clothes-Delicate
Part-W()()l,
NOT
MACHINE
Bedspre;]ds, Robes*
D1-:lpel-ics, B:lthmats
Indigo BIUC
and
other fabrics that bleed
Items,
Plas(ics and
such
Cotton”
I.:nnin:ited
as
W~rm
Hot
Warm
WarmRe&ular
Warm
Hot or
Wurm
Hot or Warm
H()[ or
W:lrrn
Cold or Warm
Warm
Will”Ill
Permanent Press Cycle
Regular Cycles
Knits CycleBJby
Regular Cycles
Permanent Press
Permanent Press Cycle
Regular Cycles
Regular Cycles
Knits
Cycle
Permanent Press Cycle
Cycles
Cycle
set
dt Stll”t
Normal or Light Soil Setting,
depending on
Set at Start
Light Soil Setting
Light Soil Setting
set
at
Set at Start
Normal Setting
Norm~l
Sel
at
set
at
S(ul”t
Setting
Stal”t
St:ll”(
zlmount
of soil.
*~hec~ sly,e S{)[llc SI ipcovcl-s, C\l-:\pcIics
6
:ind
hedspl-edds may
be
loo lar&e
for automatic home-size
washer
Page 7
Bleach
I
Special Instructions
Liquid chlorine type.
Only non-chlorine bleach when needed.
I
White or colorfast, liquid chlorine type.
Noncolorfast, only non-chlorine bleach
when needed.
White or colorfast, liquid chlorine type.
Noncolorfast, only non-chlorine bleach
when needed.
White or colorfast, liquid chlorine type.
Noncolorfast,
when needed.
No bleach.
Seldom needed. If needed, use only
non-chlorine bleach.
I
White or colorfast, liquid chlorine type,
1
Only non-chlorine bleach when needed.
No bleach.
No bleach.
White or colorfast, liquid chlorine type.
only
non-chlorine bleach
I
White or colorfast, liquid chlorine type.
White or colorfast, liquid chlorine type.
If colorfast is unusually soiled, use hot water. Use maximum detergent recommended in
the Detergent Guide.
Use maximum detergent recommended in the Detergent Guide.
Small loads reduce wrinkling. Use maximum detergent recommended in the
Detergent Guide.
If unusually soiled, use hot water. Use maximum detergent recommended in the Detergent
Guide. Small loads reduce wrinkling.
Wash only if recommended by the garment manufacturer. Follow instructions carefully.
Wash in your washer
Wash frequently to fluff up the down and retain the garment’s warmth. Wash separately. Wet
down gives off an odor which may be absorbed by other garments. Odor disappears
garment is dry. Treat heavily soiled areas with
granular detergent. Close zippers. Wash 2 or 3 at a time or add towels (o balance.
GARMENT MUST BE TUMBLE DRIED.
You may prefer to use a mild type detergent. Do baby clothes separately. Pretreat spots.
Rinse diapers, nightgowns, pads and sheets after use, Keep diapers in a covered pail of cold
water and conditioning agent like
You may prefer to use a mild type detergent. Do hand-knit garments by hand or in the
Mini-Basket tub. See How to Use the Mini-Basket Tub section.
Fill washer, add detergent, allow to dissolve before adding blanket, Do one blanket at a time.
Pretreat heavily soiled spots with
On electric blanket, sew a strong piece of cloth over plug to protect blanket
damage. Do one blanket at a time. Pretreat heavily
Vacuum out loose dirt before washing,
Wash only 2 or 3 rugs or mats at one time. Shake before washing to remove excess dirt.
otr/y
if recommended by the garment manufacturer.
liquid
detergent or paste made of water
Borateem
liquid
brand.
detergent.
soiled
spots with liquid dete~ent.
and
washer from
when
tind
No bleach.
No bleach.
No bleach.
Refer to Garment Manufacturer’s Care
For more information on care labeling, send for “What’s New About CARE LABELS.”
For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington,
For new “indigo blue” jeans, wash at least 3 times in very small loads with full water
Jeans need ample room to move to avoid white lines at creases. May discolor plastic washer
parts. Subsequent washings will reduce discoloration, but will probably never eliminate
The stained
Tumble on FLUFF (No Heat).
Pillows are made of different materials~acron, fiber, foam, polyester, natural feathers and
down. Many pillows can be machine washed, but
jbllowed
mend to prevent escape of feathers or filling. Fill washer, add detergent
minutes to dissolve detergent. Add two
Darts
will notdiscolor subsequent
C’arefullv.
rf washing is recommended, check pillows for weak seams or
Dillows
Labeis
washing loads.
manufclcturer,~ cure label.~ tnuv[ 1?(’
and agit~te for sever~l
at a time to balance load. Use
DC.
2M02.
holes and
Iarxe
water level.
fill.
i(.
7
Page 8
OPEMT~G
How to Use the Filter-Flo Pan
~STRUCTIONS
(continued)
● The Filter-Flo pan is the
filter. Position the Filter-Flo
pan on the agitator after
loading clothes into
the washer. Lint is
easily seen and removed
after the wash is finished.
lint
-
.:,:,,::::::::’::c:::>::;::,:...
<j~~ ‘ifij<~~’~$<[+
,:..;:.::::::,s..
. . . .
. . . .
L
g
. . .
. . . .
. . . . . .
. ... . .
.
.
..:.;
. . . : ..
:,.,...,: :, :..,..,:.,:,:..
. . . . . . . .
. .. . .
. . . .
G
How to Use the Bleach Dispenser
c
Use this dispenser with
liquid bleach only.
If you prefer to
use powdered
bleach, pour it
;ot
pour
p~wdered
bleach
into the bleach dispenser.
&d..
)L
\
~
m
..,.:; ;:::; ,li k:,
.
.,,>....:.,,.
~
AH
NOTE: Do not use the Filter-Flo pan as a wash
basket. Do not put items to be washed in the
Filter-Flo pan. Do not place detergent packets
in the Filter-Flo pan.
The Filter-Flo pan also serves as a lid for the
Mini-Basket tub. See How to Use the Mini-Basket
Tub section.
● Measure bleach carefully. Here are some
recommended amounts:
LARGE WATER LEVEL—I X cup (310 ml) liquid
SMALL WATER LEVEL—2/3 cup (
MINI-BASKET tub—1/4 cup
● Pour measured amount of
(60
1 iquid bleach
170
ml) liquid
ml) liquid
directly into
bleach dispenser.
● Do not overfill or allow dispenser to overflow.
Avoid splashing. Undiluted bleach can cause
fabric damage.
● Never pour undiluted liquid bleach directly onto
clothes or into the wash basket or Mini-Basket
tub.
How to Use the Soak Cycle
● SOAK CYCLE
temperature
will
automatically
be cold.
● For a hot or
warm soak, set the
Wash/Rinse Temp.
control to HOT/COLD
turn the Cycle Selector
the Regular Cycles.
Reg”la,
Cycles
So.kc,c!e
,,,”,
S0(,
m
.0,..,
or WARM/COLD and
knob to NORMAL in
“EAW
,...
\
$~.
~F
START
Pe,m
~%
❑
\
:
0,,
s,,,,
b
.,
Start the washer. After washer fills and begins to
agitate, push in the Cycle Selector knob and turn to
SOAK CYCLE. Pull out the Cycle Selector knob to
complete the cycle.
● For an extended soak, allow the washer to
fill
and
agitate for a few minutes to dissolve the soaking
agent. Then push in the Cycle Selector knob to stop
the washer (keep lid closed) and
allow
to soak for as
long as desired. After desired soak period, pull out the
Cycle Selector knob to complete the cycle.
8
Page 9
~pical
●
Small
Mini-Basket ~b Wash Loads
loads of regular fabrics
(up to 2fi pounds)
(1 .125 kg).
● Delicate
loads
such as lingerie, panty hose, girdles,
blouses, sweaters, socks, shirts, baby clothes and
other small, delicate
hand-washables.
●
Stuffed toys.
● Tennis shoes.
How to Wash a Small Load of Regular Fabrics or Delicate
1. Remove the
2.
Place Mini-Basket
tub on agitator.
Pull the agitator
toward the front
of the machine for
easier installation and
removal of Mini-Basket tub.
3. Put detergent in the
tub before loading clothes (about the same amount
you
w“ould
basket). See How Much Detergent Should You
Use section for more information.
4. Load clothes in the Mini-Basket tub.
5. Replace
It serves as a lid to keep
the clothes in the
Basket tub.
Filter-Flo
pan.
bottom
of the Mini-Basket
use for a small load in the regular wash
theFilter-Flo
pan
?=
Mini-
L -–
\-
6.
Add bleach,
Measure
pour recommended
amount of liquid
bleach—1/4 cup
(60
ml)—directly
into the bleach
See How to Use the Bleach
Dispenser section for more information.
7.
Close
and set controls
as follows:
—Set Water Level to
MINI-BASKET
position.
—Select desired cycle
(Regular, Permanent Press, or Knits).
See Operating Instructions.
8.
Pull
Cycle Selector knob out to start washer,
Hand-Washables
c~efully and
washer lid
Special Instructions for Use of the Mini-Basket
if desired.
disuenser.
~b
%6.
*
MEDIUM
\
d.
Water Level
URGE
H
&
—
SMALL
/
MINlBASKR
■
● The Mini-Basket tub can be used with any cycle● When washing stockings, panty hose and other
except the SOAK
● Do not wash clothes in the regular wash basket
when using the Mini-Basket tub. There will not
cycle.
easily tangled items, always handle separately.
To minimize tangling, we recommend the use of
a net laundry bag.
be enough water in the regular basket and damage
to clothes could result.
—
9
Page 10
E~RGY-SA~G
TmS
If your clothes and household
items don’t look clean and fresh
after washing, you will probably
rewash them.. and that means
you’ll waste energy. Remember to
sort your clothes carefully, and
load them properly, select correct
cycles, use enough detergent and
choose a water temperature warm
enough to release and get rid
of soil.
● Use Hot Wash—up to
(65°C.~n
a regular basis only
150°F.
when washing heavily soiled
articles-such as work and
play
clothes.
● Under normal soil conditions,
wash in water above
(27°C.).
This generally means
80°F.
using the Warm Wash
temperature setting on your
washer—temperatures
approximately
90°F.–l 10°F.
(32°C.-380C.) or hand
comfortable. If you notice that
soil has accumulated after several
consecutive washings, use Hot
Wash occasionally, if safe
for fabrics.
● Try to wash less often. Save
articles of the same type of fabric
until you have a full load.
● If you must wash smaller loads,
adjust the amount of water.
Small loads should have lower
water levels.
● Wash in off-peak utility hours.
Your local utility can tell you
which are the off-peak hours.
● Use your Mini-Basket tub for
very small loads. It uses less
water than the
small
water level
in the big tub on this washer.
You will also save on detergent
and energy.
10
Page 11
Sort by
Sufiace
Separate
i
me
Sort by Fabric
[
Separate
%=
Cottons &
ne’n
Sort by Soil
Texture
Lint
Producers
J
L
Linens
LJ
from
# Perm
from ~
\
Collectors
LJ
co~ons
Blendj
L
Lint
Press
&
from
LINT PRODUCERS—such as terry toweling and
chenille—give up lint.
LINT COLLECTORS—such as man-made fibers and
napped fabrics like velveteen and corduroy—attract
lint. These must be washed separately.
For more information on lint control, see The
Problem Solver section.
In addition to sorting to
% Synthetlw
%
OIY
Knits
.~
&
%= Dellcates
from
’n
LJ
reduce lint collection,
it is recommended
that fabrics of similar
construction be
washed together
Separate
5W ~:~~:
m’m
from *
LJ
It pays to check and prepare
clothes for washing.
● Empty pockets, brush out cuffs,
zip zippers, snap snaps, hooks
and buttons.
● Do any necessary mending—rips,
hems, tears.
● Check
all
items for areas of heavy
soil or stain.
● Remove stains. See Stain
Removal Guide.
● Turn
poly
knits inside-out to
minimize fabric surface damage.
m
~
Medium
Soil
LJ
Soaking and
way to loosen deep soils
m
Hea~
from
‘= soil
’n
LA
Pretr-ting-a
and
A thorough soaking with detergent
or special soaking agent is another
way to remove heavy soils,
embedded dirt and even some stains.
Soaking can be either a completely
separate washing step or a
preliminary step to a complete wash
cycle. For detailed information on
how to soak in your washer, see
How to Use the Soak Cycle.
good
stains.
For instructions
on different fabrics
and loads, see the
Controls Setting
Guide.
FOR INFORMATION ON
SOAKING AGENTS, see Other
Laundry
● Pretreat heavy soil by rubbing
Produck Guide.
in a small amount of liquid
detergent or a paste made of water
and powdered detergent or soap.
For best results, wait 1/2 hour
before washing.
11
Page 12
HOW TO LOAD YOUR
WAS~R
This illustration, with clothes just
reaching the Clothes Retaining
Ring, shows a proper load. Clothes
have ample room to move because
they are not packed down, nor
wrapped around the agitator.
Clothes are loaded dry since wet
items are likely to pack down which
encourages overloading. This size
load requires a full water
fill.
What is the best size load of
clothe+large,
medium, or
small? Save time, energy and
detergent by avoiding extra use of
the washer. Try to wash a full load
of clothes. If you can it is better to
save clothes until you have a full
load. If you must wash smaller
loads, save water, energy and
detergent by adjusting the water
level for the size of the load. See
Operating Instructions.
● Load clothes dry.
● Take a properly sorted group
of clothes and drop them loosely
in the wash basket in this order:
~
Large Items–like sheets. Do
not wrap around the agitator.
~
Small Items–like
washcloths.
To Add Items After the Washer Has
● Turn off the washer.
● Carefully remove the Filter-Flo pan.
● Add any additional articles by submerging them next
to the agitator.
● Replace the Filter-Ho pan and restart the washer.
S@rted
NOTE: When washing stockings, panty hose and
other easily tangled items, always handle separately.
To minimize tangling, we recommend the use of a net
laundry bag.
Special Recommendations for Washing Permanent Press If You Do Not Have a Dryer
If you are machine-washing Permanent Press clothes
that you plan to line dry or
drip-d~, use extra care to
minimize wrinkling in the wash process:
● Be careful not to overload washer. Permanent Press
clothes must have ample room to move freely. A
Medium size Permanent Press load is the largest that
should be washed.
● Use more water than you would for a regular load.
Use a Medium Water Level for a Small Load; a
Large Water Level for a Medium Load.
● Remove clothes promptly as soon as washer stops
and hang immediately.
12
Page 13
Products
Advantages
Disadvantages
PhosphatePowdered Detergents
Non-PhosphatePowdered Detergents
Liquid
Detergen&
Perform well in
Wash all types of fabrics well.
Can be used in hot, warm, or
cold water.
Perform satisfactorily in soft
or moderately hard water.
In some areas only non-phosphate
products are available.
Perform well in soft water.
Offer better performance in
hard water than powdered
non-phosphate types.
hard
or soft water.
Are not available in some areas.
Generally do not clean well in
hard water.
May be difficult to dissolve,
especially in cold water.
Should
Those containing sodium
carbonate as an ingredient may
cause harmful limestone deposits
on clothes and washer when
combined with hard water.
(See Detergents section.)
May not perform as well as
powdered phosphate products
when diluted in wash water.
not
be used in cold water.
Soaps
Clean synthetics and fabric
blends well.
Are excellent as concentrates
for removing spots.
Completely dissolve even in
cold water.
Perform well in soft water.
Generally do not clean well in
medium-hard or hard water.
May combine with water
hardness minerals to form
sticky soap curd.
13
Page 14
T~
RES~TS
OF
CONT~D
USE OF
CA~ONATE
DETERGENTS
Is your water hard? If it is, and if you use a carbonate type non-phosphate detergent, you will most probably notice
limestone* deposits on your clothes and washer surfaces. The hardness of your water and your washing frequency
will determine how rapidly the limestone will build up. If your water is VERY HARD (11 or more grains) and if
you wash just a few loads a week, you may see limestone buildups in just a few months.
Effects on Clothes
Although limestone buildup occurs more rapidly on
cotton, it
will
eventually affect various fabrics in the
following ways:
● Gives a stiff, harsh, rough feel to fabrics such
as toweling.
● Causes colors to fade and become dull and dingy.
c
Causes graying of fabrics.
● Leaves a white, powdery residue on
dark-colored items.
Effecti
Q
Unsightly buildup on all washer surfaces exposed to
on Washer
the wash solution.
● Mat-like, crusty formations caused by lint adhering to
the sticky limestone deposits.
● Increased service calls because of limestone deposits
in the pump, recirculation water hoses, filters and
other washer parts.
● Reduced useful life of washer.
● Causes spot-fading of bright colors as a result of
direct contact with detergent.
● Reduces wrinkle-resistance of permanent
press fabrics.
● Destroys effectiveness of flame-retardant finishes on
cottons such as children’s
● Increases fabric wear because of the scrubbing action
sleepwear.
between limestone deposits on the fabrics during
washer agitation.
Recommended Methods to Reduce
Limestone Buildup
● Use a powdered phosphate detergent or a liquid
detergent if these are available in your area.
● Install a home water softener. This will significantly
reduce limestone buildup.
● Use a packaged non-precipitating water softener,
such as
Calgon
brand with phosphate.
Good Washing Practices May Delay Limestone Damage to Clothes
The following recommendations will temporarily
deIay
the effects of limestone on your clothes. These are
generally good washing practices and will give better
soil removal whether or not you have hard water or use
carbonate detergent.
“
Use hotter wash water, for example up to
150°F. (65°C.)
for cottons. This also improves
oily-soil removal.
● If you wash in cooler water to save energy, use
more detergent to promote better washing. Also
be sure to use bleach on
bleachable
fabrics. Use
hot water whenever possible.
“
Add detergent and allow washer to fill and agitate
for three or four minutes to dissolve detergent before
adding clothes.
●
LIMESTONE–technically called CALCIUM CARBONATE–is caused by the
reaction of the calcium in the hard water with the sodium
catinate
in the detergent
● Increase amount of detergent. See guide on opposite
page for recommended detergent amounts in relation
to water hardness.
● Increase use of bleaches, presoaks, packaged water
conditioners, prewash soil and stain removers to
help in removing stubborn soils and stains.
● Use greater care in sorting loads. Wash very dirty
loads separately and increase detergent to help
keep dirt from redepositing on less soiled items.
Wash delicate items separately to prevent damage
from heavy, sturdy clothes.
● Wash smaller loads to increase cleaning action
of washer.
● Use fabric softener to counteract stiffness or
harshness in clothes.
14
Page 15
How to Partially Restore Clothes
Once clothes have developed limestone deposits, they
may be partially restored by soaking in a solution of two
cups
(480
ml) of vinegar in one gallon (3.8 liters) of hot
tap water for 15 minutes. USE A
Then wash clothes in the washer using detergent.
PLAS~C CO~~R.
CAUTIONS:
● Do not use vinegar soak solution in washer.
The acidic action of the vinegar may damage
the porcelain.
● Vinegar soak solution may reduce the
wrinkle-resistance of permanent press fabrics.
● Vinegar soak may damage the dyes in some fabrics.
HOW
~CH
DETERGENT
SHO~D
The use of a sufficient amount of detergent is one of the most
important things you can do to make sure your wash comes out clean.
Amount required varies
according to:
1. Water hardness
2. Amount of soil
3. Size of load
4. Type of detergent
5. Wash temperature
Use
more detergent if you have...
1. Hard water
2. Large loads
3. Greasy or oily soils
4. Lower wash temperature
If the recommended amount of
detergent produces too many suds,
switch to a low
sudsing
detergent
brand, and follow instructions
on package.
Using too little
detergent is a
common cause
of laundry
problems. Always —
measure detergent
=
=
=
=
=
=
=
~
in a standard measuring cup.
5. Low phosphate detergent
YOU USE?
How
to use
granular or powdered:
For best results, add detergent to the
wash basket before loading clothes.
If you load your clothes first, add
detergent next to the agitator.
If your detergent doesn’t dissolve
well,
predissolve
hot water, then pour directly into
the wash basket.
To use
detergent in the Mini-Basket tub,
put detergent in the bottom of MiniBasket tub before loading clothes.
To use liquid detergent
clothes basket or Mini-Basket tub,
follow package directions.
detergent—
the detergent in
granular or powdered
in regular
Recommended Amount of Detergent for Average Soil Load
Low-Sudsing
Concentrated
Powder
LIOUID
~pe
II
Water
Hardness
VERY HARD2 cups
10-20 Grains
O-10
Grains
O-10 Grains
(480 ml)
(240
Large
1
cup
ml)(180
FOLLOW
Water Level Setting
Medium
lfi
cups
(420
ml)
I M
cups
(360
ml)
1
cup
(240
ml)
314
cup
ml)
PAC~GE DI~CTl
I z
(300
314
(180
(120
(120
Small
cups
cup
1/2
cup
1/2
cup
ml)
ml)
ml)
ml)
INS
Mini-
Basket
1/3
cup
(85
ml)
l/4 cup
(60
ml)
118
CUP
(30
ml)
114
cup
(60
ml)
1.
Use recommended amount
of detergent for your load
and water hardness as
shown in guide at left.
2. When using other detergent
types—low and normal
suds, powders, liquids,
non-phosphate
powders—
follow directions
on package.
3.
For hard water treatment,
see Hard Water Guide.
15
Page 16
~RD
WATER—DO YOU
~VE
IT?
Before you can decide what to do about hard
water, you need to know if you have it and, if
so, how hard it is.
● If you live in a municipal area, contact your
water company.
● If you live in a rural area, or in some suburban areas,
contact your county agent.
The answer will be “you have ‘so many grains’ per
gallon (3.8 liters)” and means this:
O to 3 grains per gallon (3.8
liters)—SO~
4 to 10 grains—HARD
11 to
19
grains—VERY HARD
If your water is SOFT, you have no problem. You
can use soap or detergent as you prefer and forget all
about hard water. If you have HARD water—less than
10 grains—and you use phosphate detergent, you also
have no problem.
But, if you have more than 10 grains, you will need
to soften your water with either...
1. An installed water softener in your home, or
2.
The use of a packaged water softener.
For information on water softeners, see the
guide below.
20 grains and over—EXTREMELY HARD
Add This Much Water Softener with a Full Water Level
Grains of
hardness
When using
with detergent
o-1o10-15
o
1/4
cup
(60 ml)(120
15–20
1/2
cup
ml)(160 ml)
20-2525-30over 30
213
CUP
1
cup
(240 ml)30 (240 ml plus 15 ml for each extra 5 grains)
1 cup plus
1
tablespoon for every 5 grains above
When using
with soap(80 ml)
1/3 cup
213
(160
CUP
ml)
314
cup
(180 ml)
1 cup
(240 ml)
1%
cups
(360 ml)
X
cups plus 1 tablespoon for every 5 grains
1
above 30 (300 ml plus 15 ml for each extra 5 grains)
16
Page 17
Laundry
Product and
BLEACH
Chlorine liquid
such as
Clorox
Non-chlorine such as
Clorox
2 brand
FABRIC SOFTENERS
Rinse additive such as
Downy Brand
Wash additive such as
Rain Barrel brand
SANITIZER
Chlorine bleach
such as
C1orox
WATER SOFTENER
Non-precipitating
such as
Calgon
Precipitating such as
Borax brand
SOAK AGENT
Such as
PRETREATING, STAIN
AND SPOT REMOVERS
Such as Spray>n Wash
and
TINTS AND DYES
Powdered such as
and
Biz
K2R
Tintex brands
~pe
brand
brand
brand
brand
brands
Rit
How to Use It
Use your bleach dispenser.
See How to Use Your Bleach
Dispenser section.
Follow package directions.
Put bleach into washer with detergent.
Mix recommended amount with
cup (240 ml) water and add at start of
rinse cycle.
Follow package directions.
Add during wash cycle.
Use in case of infection and
contagious disease.
See under Bleach above.
Follow package directions.
Add at start of wash cycle.
Follow package directions.
Use with detergent or soap in wash cycle.
Follow package directions.
Follow package directions. Treat only
heavily soiled areas. Check garments’
care labels for instructions.
Follow package directions.
NOTE: Tinted garments may not be
colorfast. Wash separately.
one
Special Instructions
1) Do not pour undiluted liquid chlorine bleach directly into
washer or on dry clothes.
2) Some of today’s washable fabrics should not be chlorine
bleached such as:
sleepwear,
colors.
3) Check Manufacturers’ Care Labels for special
1) May be used on
2) Is most effective in hot water.
1)
2) Reduces static electricity.
3) Use carefully. Too much may cause staining on
4) Do not pour directly on clothes.
5) For those recommended for adding to the wash cycle,
Guards against infection by killing most bacteria and
viruses.
Suspends hardness minerals in solution, keeping
water clear.
Combines with water hardness minerals to form precipitate
which gives
CAUTION: Washer control panels and finishes may be
damaged by some laundry pretreatment soil and stain
remover products if such products are sprayed on or have
direct contact with the washer.
products away from washer.
normally. Damage to
products is not covered by your warranty.
Clean washer to avoid discoloration of next load. Go
through complete cycle (5-minute wash) using hot water,
1/2
exterior parts. Caution: Tinting may discolor plastic in
washer. Subsequent washings will reduce discoloration
but may never eliminate it.
Dilute
instructions.
Helps
make clothes fluffy and soft.
some clothes.
such as Rain
instructions exactly.
cloudy
cup (120 ml) detergent, 1 cup (240 ml) bleach. Wipe
1007.
siik,
wool, mohair,
bleach before using on any fabric.
Barrel brand, follow manufacturer’s
cotton flame-retardant children’s
spandex,
all
kinds of fabrics.
or milky appearance to water.
Apply
The fabric may then be washed
your washer caused by pretreatment
leather, or non-fast
these pretreatment
—
17
Page 18
1. Try to remove stains as soon as possible. The● Test stain removal product on a hidden inside
fresher the stain, the easier it is to remove.seam or on a sample of the
2. Before attempting to remove any stain, take
these steps:
● Find the fabric and the finish in the chart on the
next page, and use only recommended methods.
● Check the care label instructions that came with
● Avoid use of hot water on unknown stains. It can
set some stains.
3. Follow stain removal with a thorough rinsing.
4. Wash with recommended amount of soap or
detergent.
materiai.
the garment.
Stain Removal Hint—Using Chlorine Bleach for White and
Bleachable Fabriw
Mix 1/4 cup (60 ml) chlorine bleach with one gallon (3.8 liters) of cool
water—approximately
80°F. (27°C.)—in
a sink or pan. Soak stained area
for 5 minutes and launder in washer.
The Case of the “Invisible”
Food or cooking oils on your synthetic garments
may cause stains which are virtually invisible and
which you may not notice as you put your clothes
into the washer.
Shin
If these stains are not completely removed in the wash,
the oily spots may pick up dirt from the wash water.
Then they will become very visible and you may think
they were caused by the wash cycle itself.
Once These Spoti Become Visible, How Can You Remove Them?
● Rub in undiluted liquid detergent and let stand 30 minutes.
● Rewash using hottest water the fabric can stand.
How Can You Prevent These “After-You-Wash” Stains?
● Increase the amount of detergent normally used.
● Increase water temperature where fabric will permit.
Fresh Fruit, Fruit Juices,
Wine, Vegetables or Food
Coloring
Rub with ice or immerse in very cold water. Use dull tool to
carefilly scrape off as much adhesive or gum as possible. Sponge
with a safe dry cleaning fluid,* then launder.
Apply undiluted liquid detergent. Rinse. If stain remains, bleach
according to the Stain Removal Hint on opposite page. If color has
changed, you may be able to restore it by sponging with
ammonia.**
Rinse thoroughly.
Soak in cold water, then launder in warm water. If stain remains,
bleach according
Soak
in cold water. Treat stain with a safe dry cleaning fluid*;
to the Stain Removal Hint on opposite page, launder.
Apply undiluted liquid detergent, launder, dry. Bleach according
to the Stain Removal Hint on opposite page, launder and dry.
Without cream: Bleach according to the Stain Removal Hint on
opposite page. Launder. With cream: Follow guide directions
for
cream.
Treat stain with safe dry cleaning fluid.* Apply undiluted liquid
detergent; launder and dry. Bleach according to the Stain Removal
Hint on opposite page.
Soak stain in cool water. If stain remains, bleach according to
the Stain Removal Hint on
oppsite
page, launder.
Same as white and bleachable fabrics.
Same as white and bleachable fabrics
except use non-chlorine bleach.
Sponge or soak in
cool
water, then
launder.
Soak in cold water. Sponge with a safe
cleaning fluid.* Apply undiluted liquid
detergent. Launder in warm water.
Sponge with warm water. If stain remains,
apply warm glycerine, let stand 30
minutes and rinse well, or sponge with a
safe dry cleaning fluid. * Launder.
Sponge with a safe dry cleaning fluid.*
Then launder in warm detergent water.
Sponge with warm water. Bleach remaining
stain with non-chlorine bleach.
Grass, Foliage, Flowers,
Mildew. Scorch
Apply undiluted liquid detergent. Launder. (Treat mildew spots
while
they
are fresh,
befo~
mold has a chance to weaken fabric.)
If either type stain remains, bleach according to the Stain Removal Hint
on opposite page, launder. (Severe scorch cannot be removed.)
Ink, Ballpoint
Fresh stains: Place stain face down on an absorbent towel and
sponge with dry cleaning fluid,* or use spray cleaner. Apply
undiluted liquid detergent. Old stains: Bleach according to the
Stain Removal Hint on opposite page.
Paint and Varnish
Soften with oil, lard or petroleum jelly, then sponge with
turpentine or banana oil. Launder in warm water.
Perspiration
Apply undiluted liquid detergent and launder in warm water. If
color
has changed you may be able to restore it by treating with
ammonia
or vinegar.** If any stain remains, treat with safe dry
cleaning fluid* or bleach according to the Stain Removal Hint on
Rust
DPWsite page,
Apply rust remover,** using manufacturer’s directions. Rinse and
launder and
dry.
launder.
*Caution: Because cleaning
A
and required cautions (usually printed on label). Use extreme caution
with flammable compounds.
Under no circumstances should fabrics containing flammable materials
(waxes, cleaning fluids, etc.)
are in a well ventilated room when using them. No cleaning
fluid should be used unless user is familiar with the limitations
tluids
k washed
tend 10 be
in washer.
[oxic,
be sure
you
Sponge
with warm water. Apply
liquid dete~ent.
Bleach remaining stain
urrdiiuted
with non-chlorine bleach, then launder.
old mildew stains can seldom be
removed. Scorch can seldom
be removed.
Same as white and bleachable fabrics
except launder using non-chlorine bleach.
Same as white and bleachable fabrics.
Launder in warm water. Rinse well. Bleach
with non-chlorine bleach.
Same as white and
**DO
not ~lx chlorine bleach
and/or rust remover. Mixing can produce a toxic gas which may cause
deatb.
Save
and refer to garment manufacturer’s care labels.
with ammonia
or acids
bleachabie
such as
fabrics.
Vinegflr
19
Page 20
QUESTIONS?
PROBLEM
LINT OR RESIDUE
ON CLOTHES
USE
TmS
PROBLEM
SOL~R
POSSIBLE CAUSE
● Incorrect sorting of clothes. Separate lint producers (such as terry towels and
chenille) from lint receivers (such as man-made fabrics, velveteen, corduroy).
● Washing too long, especially for smaller loads. For normal soil, wash one minute
per pound of dry clothes.
● Use of non-phosphate detergents which combine with hardness minerals to form a
precipitate which can be mistaken for lint. Use a phosphate or liquid detergent; use
warmer wash water or soften water with an installed mechanical softener or a
packaged water softener.
●
Powde~
residue from granular detergent may appear to be lint.
Predissolve
granular
detergent in hot water before adding to washer; make sure detergent is completely
dissolved before adding clothes; switch to liquid or cold water detergent or use
warmer wash water. See Detergent Guide.
● Overloading will cause abrasion which creates excessive lint. Wash fewer items
with correct water level.
● Too much bleach. Use correct amount of bleach according to package directions.
● Not enough detergent to hold lint in suspension during wash cycle. Increase amount
of detergent. See Detergent Guide.
● Incorrect use of fabric softener. If used in wash cycle, softeners may react with
detergent to create a white deposit. Use softeners in rinse cycle only unless package
specifies adding to wash cycle. See Other Laundry Products section.
● Pilling usually on polyester-cotton
blends
is caused by normal wear and may look
like lint. Turning clothes inside-out may provide some help.
● Static electricity caused by overdying will cause attraction. Use fabric softener in
rinse
cvcle.
GREASY OR OILY
STAINS ON
LAUNDERED
GARMENTS
GRAYED CLOTHES
These are sometimes called “Invisible Stains” because you may not notice them before
washing clothes. However, if oily soils are not completely removed in wash cycle,
the oily spots may pick up dirt from the wash water. The spots will then be very visible.
They are
not
caused by the washer. Wash synthetic garments as soon as possible after
wearing. Use more detergent than normal and hottest water fabric can stand. If spots
appear, rub in undiluted liquid detergent, let stand 30 minutes and rewash with extra
detergent using hottest water fabric can stand.
●
Insufficient detergent. You may need to increase amount of detergent used if load is
larger than normal, if soils are oily or heavier than average, if water level is large or if
water is Hard to Extremely Hard.
●
Water not hot enough for type of load. Be sure water heater is set to deliver hot water to
the washer at
such as
●
Poor or inferior detergent. Change to phosphate detergent, if possible. Follow these steps:
1. Use water conditioner (such as
140°F.–1500F.
dishwashing
(60°C.<50C.). Do not wash when other hot water
or family baths-are heavy.
Cdgon
brand).
needs—
2. Pretreat stains.
3. Use the hottest water possible.
4. Use bleach where possible.
5. Use presoak aids.
6. Install water softener.
● Washer overloaded. Clothes cannot move freely to loosen and remove soil, causing
gray
appemance.
Follow correct loading procedures for size of load.
20
Page 21
PROBLEM
POSSIBLE CAUSE
GRAYED CLOTHES
(continued)
● Improper soaking with insufficient detergent. Usually a 30-minute soak is sufficient.
However, when using extended soaks for heavily
soiled
garments, you may need to use
twice the recommended amount of detergent.
● Use of soap in hard water. Switch to a phosphate detergent, or follow six steps at
bottom of previous page.
● Washing too
long
may result in increased soil deposition. Use shorter wash times for
smaller loads.
● Detergent dissolves too slowly. Detergent must be present in the wash solution at the
start of agitation. See Detergent, Other Additives section.
● To restore grayed clothes, follow one of these procedures:
1. Put clothes in washer. Fill with HOT water. Check Manufacturer’s Care Labels to
determine if hot water is suitable for garment.
●
Add a non-precipitating type of water softener such as
use
2Yz
times as much as you need for normal water softening.
Q
Do not use detergent or soap.
● Allow clothes to go through complete cycle.
● Repeat, if necessary.
2. If you prefer to use the Soak
cycle,
see How to Use the Soak Cycle section. Use
Calgon
brand with phosphate—
the water softener in place of soak agent or prewash detergent and allow clothes to
soak for about 20 minutes.
3. Use the Mini-Basket tub. See How to Use the Mini-Basket Tub section. Increase
detergent.
YELLOWED
CLOTHES
BLUEORGRAY
COLOR STAINS
SHRINKAGE,
GENERAL
● Incomplete removal of body soil due to constant use of insufficient detergent.
Check hem of T-shin or pillow case. If they are white and center is yellow, it contains
body oil. Restore whiteness following procedures in Grayed Clothes, above.
●
Chlorine bleach may yellow some fabrics with resin finishes. Use oxygen bleach (such
as
Clorox
2 brand). Refer to Garment Manufacturer’s Care Instructions. Restore color
using color remover (such as
● Iron or manganese in water may cause overall yellowing or yellow spots.
1.
Use extra detergent plus a non-precipitating water softener dissolved in water before
Rit
or
Tintex
brands), following package directions.
adding clothes. Use non-chlorine bleach.
Have a special filter or chemical feeder installed in your home to remove iron
2.
and
manganese from water.
Run hot water for a few minutes to clean iron residue buildup in lines; drain water
3.
heater occasionally.
4.
To remove spots:
lemon juice through stain.
Spread stained portion over pan of boiling water and squeeze
To remove overall yellow,
use a commercially available
rust scale remover, following package instructions. If porcelain damage can occur,
do not use in the washer; use a plastic container.
Improper use of fabric softener. Never pour fabric softener directly on clothes; always
dilute before adding to rinse water. See Other Laundry Products section.
stains:
Dampen stained area and rub with undiluted liquid detergent. Rewash, using
To remove
chlorine bleach if safe for fabric.
Some fabrics will shrink whether washed in a washer or by hand; others maybe
safely
washed but will shrink in a dryer. Follow Garment Manufacturer’s Care Instructions
exactly. If in doubt, do not machine wash or dry.
Page 22
THE PROBLEM SOLVER
(continued)
PROBLEM
SHRINKAGE,
KNITS
WRINKLING IN
PERMANENT PRESS
AND “NO-IRON”
ITEMS
POSSIBLE CAUSE
● Relaxation shrinkage can occur in knit fabrics that have been improperly stretched
and elongated by the manufacturer. When this occurs, garment may be pressed back
into shape after each wash and dry cycle.
“
Progressive or delayed shrinkage is caused when starch or sizing (in some fabrics)
is gradually removed by laundering. This may also be noticed in older garments that
have been washed many times without previous shrinkage. Treat as for relaxation
shrinkage above.
● Shrinkage caused by overheating occurs in certain knit fabrics that have been
heat-
shaped. When washing, drying or ironing temperatures exceed the temperatures used
to shape set, shrinkage may occur. This cannot be corrected, but it can be prevented
by washing in cool or warm water and drying on Low or Delicate heat.
● Leaving clothes in dryer after tumbling stops. Remove
● Too many clothes in dryer. Dry only one washer load at a time. Do not combine loads.
● Improper loads. Avoid laundering heavy Permanent Press items, such as work clothes,
and
hang clothes immediately.
with lighter Permanent Press items such as shirts or blouses. Do not wash Permanent
Press items with regular laundry.
● Too many clothes in washer. Permanent Press loads
regular loads..
● Incorrect wash and dry cycles. Use Permanent Press Wash
a
cooldown
● Incorrect water level. Use Large Water Level for Medium Load, Medium Level for
.no
more than medium loads to give clothes room to move freely.
rinse to minimize wrinkling. Also use Permanent Press Dry cycle.
should
always be smaller than
cycle
which provides
Small Load.
● Repeated washing in too hot water. Wash in cold or warm water with plenty of
detergent.
● Accumulation of lime scale due to use of carbonate detergents. If you must use
a non-phosphate detergent, avoid the use of high-carbonate-built detergent.
● Failure to use fabric softener. Proper use
will
minimize wrinkling.
To remove wrinkles:
●
Retumble
●
Rerinse
●
If unsuccessful, retumble on high heat for 10 to 12 minutes and hang immediately.
● Send to dry cleaners for pressing.
● Some wrinkles
on Permanent Press setting.
and dry on Permanent Press setting.
mav
remain which cannot be removed.
SNAGS, HOLES,
TEARS, RIPS OR
EXCESSIVE WEAR
22
● Pins on garments or sharp objects left in pockets. Check to make sure all
such
objects
are removed. Also check wash tub.
● Snaps, hooks, sharp buttons, belt buckles, zippers. Fasten hooks, zippers and buttons.
Remove sharp buttons and belt buckles. This is especially important in washing knits
which snag easily. Turn knits inside out.
● Holes with random square shapes with yellow discoloration may be caused by
improper use of chlorine bleach. Use only correct amount of bleach. See Other
Laundry Products section. Never add undiluted bleach to wash tub or
allow
clothes to
come into contact with undiluted bleach. Do not wipe up bleach spills with clothes.
● Small, unnoticed tears may enlarge during washing process. Check garments before
washing and mend all rips and tears.
Page 23
PROBLEM
POSSIBLE CAUSE
SNAGS, HOLES,
TEARS, RIPS OR
EXCESSIVE WEAR
(continued)
HEAVILY SOILED
AREAS such as
collars and cuffs
WASHER WON’T
OPERATE
● Chemicals such as hair bleach, dye, permanent wave solutions, battery acids and
toilet bowl cleaners may cause fabric holes. Rinse all towels and other articles that
came in contact with these chemicals before putting them in wash. Do not
contaminate clothing articles with these chemicals.
● As Permanent Press garments age, they may show fraying at collars and cuffs. This is
normal due to weakening of fibers by the Permanent Press process. It is not caused
by washer. You can slow this process by washing small Permanent Press loads with
a Large Water Level. Do not wash heavy items such as towels with Permanent Press.
Remove collar stays, when possible.
● Roughness or burrs on agitator may cause rips or tears. Check agitator and file rough
spots if necessary.
● May be caused by the use of Regular Cycles for delicate articles. Use
cycle. Refer to Garment Manufacturer’s Care Labels.
● Garments weakened by age, sun or atmosphere. This is inevitable and is not caused
by washer.
● Too large loads, or too little water. Load washer only with number of items that will
move freely. Select correct water level.
Pretreat with liquid detergent.
Perrn.
Press
WATER
~MPERATURE
IS INCORRECT
WATER WON’T
DRAIN
WATER LEAKS
@@
● Make sure cord is plugged into outlet.
● Make sure both hot and cold faucets are turned on.
c
Make sure controls are set and Cycle Selector knob is pulled out to ON position.
s
Make sure lid is closed. Washer will fill but will not spin or agitate with lid open.
● Check house fuses or circuit breakers. If another appliance is sharing the electrical
outlet, remove it. Washer
● Make sure temperature selector controls are correctly set.
● Make sure hot and cold faucets are turned on and
regulated correctly.
●
Make sure hoses are connected to correct faucets . . .
hot to hot, cold to cold.
● Water valve screens may be stopped up. Remove inlet
hoses from water valve. Clean the screens and reinstall hoses.
● Check house water heater to make sure it is delivering water at
140°F.-1500F.
● Make sure drain hose is not kinked.
● Top of drain outlet should be less than 8 ft. (2.4 m) above floor.
● Make
● Make sure end of drain hose is correctly inserted in and secured to drain facility.
sure
(60°C.+50C.).
hose connections are tight at faucets.
should
have separate outlet.
+
${
o
(continued next page)
23
Page 24
T~
PROBLEM
(continued)
SOL~R
PROBLEM
WASHER IS NOISY
WASHER PAUSES
IN CYCLE
If you need more help...call, toll free:
GE Answer
Center@
POSSIBLE CAUSE
● Make sure washer is level and firm to the floor with rubber foot pads in place and
front jam nuts tight. See your Installation Instructions.
● A sharp, distinctive sound will be heard at the end of each spin period as the motor
stops and the spin brake inside the transmission “locks in.” This sound is normal.
Q
Heavily unbalanced loads can cause the washer to vibrate excessively during spin,
and may cause it to move from its original position. In extreme cases (usually occurs
when washing a single, heavy item or a small load when water level is set higher than
necessary), the spin basket may strike the outer tub, creating a loud but harmless noise.
To correct, open the lid and redistribute the load evenly about the wash basket. Close
the lid and restart.
● Washer normally pauses between washing steps... such as between wash and spin or
between spin and rinse.
800.626.2000
consumer information service
24
Page 25
CAm Am CLEAN~G
USER MAINTENANCE INSTRUCTIONS
The
~b.
The porcelain is self-cleaning. Leave
washing to allow moisture to evaporate. Do not use
harsh or gritty cleansers.
The Exterior.
Wipe off any spills of washing compounds. Wipe
or dust with damp cloth. Try not to hit surface with
sharp objects.
lid
open after
To Store Washer.
Ask service technician to remove water
from drain pump and hoses to prevent freezing.
Do not store the washer where it will be exposed
to the weather.
For Long Vacations.
Be sure water supply is shut off at faucets
and drain all water from hoses if weather will
be below freezing.
How to remove the
To remove the agititor, snap the cap off and
remove the screw. Then remove the agitator extender
(on models so equipped) and the agitator.
To replace the agihtor, carefully lower it straight
down onto the shaft so that it fits snugly into place.
Replace the agitator extender (on models so
equipped), the screw and the cap.
agititor
How to remove limestone deposi~ from clogged
● Soak filter pan in a preheated
solution of half
minutes. Then
bristle brush while flushing with running water.
vinegar and half water for 15
brush”each
160°F.
(71 ‘C.)
side of pan with a stiff
Cap
Screw
;
o
‘,
/’
j)
..= ~---
A
t
(Appearance may vary)
Filter-Flo
pan
Agitator Extender
(on some models)
Agitator
Shaft
CAUTIONS:
● Do not soak in porcelain container. Vinegar
can damage porcelain.
● Do not exceed
may warp.
180°F. (82°C.
) or filter pan
25
Page 26
NOTES
26
Page 27
Wdll
Be There
With the purchase of your new GE appliance, receive the
assurance that if
you ever
from GE, we’ll be” there.
need information or assistance
Ml you have to do is cdl—toll-free!
GEAnswer Center@
80~626.2000
In-Home
Repak
Service
800-GE-CARES
f100-432-273fl
AGE Consumer Service professional
will provide expert repair service,
scheduled at a time that’s convenient
for you. Many GE Consumer Service
company-operated locations
service today or tomorrow, or at your
convenience
weekdays,
days). Our factory-trained technicians
know your appliance inside and outso most repairs can be
one visit.
(7:00
9:00
a.m. to
a.m. to
offer you
7:00
2:00
p.m. Satur-
handed
p.m.
in just
Service Contracts
8W-626-2?24
You can have the secure feeling that
GE Consumer Service will still be
there after your warranty expires.
chase a GE contract while your warranty is still in effect and you’ll receive
a substantial discount. With a
year contract, you’re assured of future
service at today’s prices.
Pur.
multiple-
Whatever your question about any
major appliance, GE Answer Cente@
information service is available to
help. Your cdl—and your
will be answered prompdy and
courteously And you can
time. GE Answer
open 24 hours a
?Iecommunication
Cente@ senice is
day
‘4
Device for the Deaf
question-
cdl
any
7 days a week.
. .
GE
I
$
Patis andAccessories
800-626-2002
Individu& qufified
own appliances can have needed
parts {)r
[heirhome. The
vides
all
fully warranted. VISA, Master(lard
ancl
contained in this
dwes intended to be performed by
any user. Other servicing
shodd
vice personnel. Caution must be
exercised, since improper servicing
may cause unsafe operation.
accessories sent directly to
access t.()
(;E (;enuine
Discover cards are accepted.
User maintenance instructions
be referred to
to service
(1E
parts system pro-
over 47,000 parts... and
Renewal Parts are
boo~et
cover
generdy
qudfied
tieir
proce-
ser-
“)
-—
,,.. —. ..-
.m!m
- . . .
“
.“-—...
For Customers
.,
a.
,.,
----
-.
“., ,
Wfih
Special Needs.,.
800.6262000
Upon request, GE will provide Braille
controls for a variety of GE
and a brochure to assist in planning a
barrier-free kitchen for persons
limited mobility To obtain
free of charge,
Consumers with impaired hearing
or speech who have access to a
or a conventional teletypewriter may
cdl 800-TDD-GEAC
to request information or service.
cdl
800.626.2000.
(800-833-4322)
applimces,
witi
tieseitems
TDD
Page 28
Save proof of
YOUR GE AUTOMATIC CLOTHES WASHER
WARRANTY
orlglnal
purchase date such as your sales slip or
cancelled
check to
establlsh
warranty period.
WHAT IS COVERED
I
WHAT IS NOT COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor
in your home to repair or replace
any
pafi
of
the
washer that fails
because of a manufacturing defect.
LIMITED ADDITIONAL
FOUR-YEAR WARRANTY
For the second through fifth year
from date of original purchase, we
will provide, free of charge,
replacement parts for
the
transmission
of a manufacturing defect. You pay
for the service trip to your home
and service labor charges. Or, if
you desire, we will provide a
any
pan
of
that fails because
completely reconditioned
transmission. You pay
shop reconditioning labor, the
service trip to your home and
service labor charges.
● Service trips to your home to teach
for the
you how to use the product.
Read your Use and Care material.
If you then have any questions
about operating the product,
please contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
GE Answer
CenteF
800.626.2000
consumer information service
. Improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, plumbing and
other connecting facilities.
This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
D.C.
and Washington,
In Alaska the
warranty is the same except that it
is LIMITED because you must pay
to ship the product to the service
shop or for the service technician’s
travel costs to your home.
All warranty service will be
provided by our Factory
Sewice
Centers or by our authorized
Care@
Customer
servicers during
normal working hours.
Should your appliance need
service, during warranty period or
beyond, call 800-GE-CARES
(800-432-2737).
● Replacement of house fuses or
resetting of circuit breakers.
● Failure of the product if it is used
for other than its intended purpose
or used commercially.
● Damage to product caused by
accident, fire, floods or acts of God.
WARRANTOR IS NOT
RESPONSIBLE FOR
CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
Jhis book is
pr;nted
on recycled paper.
Part No. 113D5497P282
Pub
No,
49-9762
8-92
CG
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
va~
from state to state.
WWA5809R
WWA5857R
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.