GE THQL1120AFP2, THQL1150, THQL1115AFP2, THQL1140 User Manual

Load Centers and Circuit Breakers

Section Updated 08 / 2016

Q-Line Circuit Breakers– Product Features and Benefits........1-2

PowerMark Gold Load Centers—

Product Features and Benefits ........................................................1-3

PowerMark Gold and Plus Load Centers—

Product Number Guides......................................................................1-4

Q-Line Plug-in Circuit Breakers............................................................1-5

Special Purpose Circuit Breakers ........................................................1-6

PowerMark Gold and Plus Single-Phase Load Centers—

Main Lug Convertible to Main Breaker.........................................1-9

Main Breaker Factory Installed .....................................................1-12

PowerMark Plus

Main Circuit Breakers or Main Lugs Factory Installed .......1-14

PowerMark Gold Load Centers—Specialty Panels...................1-17

PowerMark Gold Meter Socket Load Centers ............................1-18

Field Installed Accessories...................................................................1-24

Wiring Diagrams ......................................................................................1-30

Load Centers and Meter Socket Load Centers—

Knockouts................................................................................................1-37

™

Three-Phase Load Centers—

Section 1

Rev. 11/13

Data subject to change without notice

BuyLog™Catalogwww.geindustrial.com

1-1

Q-Line Circuit Breakers

Reliability and Economy

Section 1Load Centers and Circuit Breakers

Special Purpose Circuit Breakers

—PowerMark Gold Main Circuit Breakers

Copper stabs, tin-plated for corrosion resistance, make the connection reliable and permanent.

—Arc Fault Circuit Interrupter —Dual Function GFCI/AFCI Ground Fault

& Combination Arc Fault Circuit Breaker —Ground Fault with Self-Test Feature —Ground Fault with Equipment Protection —Switching Neutral —HID Lighting Breaker —High Magnetic Breaker —Molded Case Switch

Heat-resistant thermoset cases and covers add stability and structural rigidity.

Trips are easy to spot because handles trip to the center position.

The dedicated calibration screw is cemented (not simply papered over) to prevent shifting. The result is stable calibration for optimum trip performance.

—Surge Arrester —TQ Breaker

At 1/2”, THQP breakers are half the width of standard breakers, permitting the use of smaller load centers that save money and space in both new construction and service upgrades. They feature the same high-performance design, and meet the same stringent standards as other QLine breakers. Our 1” THQL will remain the breaker of choice for many contractors. In applications where space and cost are not critical, they’re an excellent choice. But when size and money are driving considerations, THQP breakers are the smart choice.

Enclosed circuit breakers make it easy and efficient to install exterior main breakers.

Maximum protection against all-too-common electrical fires comes from the new technology built into GE’s arc fault circuit interrupters (AFCIs). With its ability to detect and interrupt arcing caused by damaged wire insulation or a frayed extension cord, the AFCI takes home and family protection to a new, higher level.

1-2

BuyLog™Catalog

THQLSURGE surge arresters are easy to install and protect the whole house – computers, fax machines, televisions, stereos, VCRs and other sensitive electronic equipment – from destructive surges.

The NEC requires ground fault protection of receptacles outdoors and in garages, bathrooms and spa areas. These ground fault circuit interrupters eliminate the need for separate GFCI receptacles, protect against short circuits and overloads, and prevent shock by detecting very low levels of current leaks and immediately shutting off power to the circuit.

www.geindustrial.com

Rev. 11/13

Data subject to change without notice

Load Centers and Circuit Breakers

PowerMark Gold Load Centers

Highest Quality and Convenience

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality. —UL Listed (Panelboards No. 67) —Suitable for Use as Service Entrance Equipment when installed

in accordance with National Electrical Code —60°C/75°C Conductor Rating —Single phase, 40-225A, 2-42 circuits —Main lug models field convertible to main breaker —Main breaker 22kAIC standard - factory installed —All load centers top or bottom feed —Indoor and outdoor rated enclosures —Indoor fronts combination surface/flush —Copper bus with tin plating standard —Split neutrals extend the full length of the interior for ease of wiring —Entire main lug line converts easily to main breaker —Combination surface/flush front with spring-reinforced pan —Combination slotted/Robertson square-drive screws on neutral,

ground, front and breaker lugs —Front packed in inner carton for added protection —Field installable feed-through lugs up to 200A —Straight-through main wiring —Main breaker is clearly marked and circuit numbers are stamped

on front —Isolated ground bar is available —Compact box maintains optimum wire-bending space

One-piece interior removes and reinstalls easily

Full-length neutrals are easier to wire, reducing installation time and cost

Minimum 100% neutral terminations

Sturdy copper bus and galvanized box increase durability and reliability

Accepts GE Q-Line branch circuit breakers, including GE’s exclusive 1/2" THQPs

Section 1

Main breaker configuration allows top or bottom feed without modification

Combination slotted/Robertson square-drive speeds screw wiring

All holes rated for 14-4 wire

100% rated split neutral on each side

Tie bar may be removed to split neutral/ground

Packaging features comprehensive selection and application data. Fronts are packed in inner cartons for added protection during shipment and at the job site.

Main lug load centers offer an economical solution for subpanels and similar applications. All main lug units 125A and above convert easily to main breaker.

Accessories and Options

—Door lock and handle —Hardware kits —Equipment ground kits —Main breaker retainers —Sub-feed and feed-thru lugs —Neutral kits —Front filler plates —Universal raintight hubs —Handle lock and ties

Three-phase PowerMark Plus load centers have aluminum bus with copper breaker

mounting stabs.

16 circuit and above.

A complete family of meter socket load centers — ring style and ringless, wide and narrow, meter mains, farm panels and more — deliver specialized solutions for special situations.

The PowerMark Gold line includes a wide range of outdoor as well as indoor units.

GE’s residential load centers reach into commercial applications as well, with riser panels, auxiliary gutters, three-phase units with standard 22kAIC ratings, and all the accessories needed to complete the job.

Safety accessories – convenient and easy to install

—THQLSURGE whole house surge protector —Arc fault circuit interrupter breaker, 1- or 2-pole —Ground fault circuit interrupter breaker, 5mA and 30mA —Generator transfer panel – 30A or 60A, indoor or outdoor —GE AC disconnects

Rev. 11/13

Data subject to change without notice

BuyLog™Catalogwww.geindustrial.com

1-3

204 C BCU42MT

GE Identification

Type M = Main breaker L = Main lug LM = Convertible

PL = Main lug (Thermoplastic)

Insert for PowerMark Gold CU = Copper Bus

42 = Copper Bus Full 42 circuit panel

Maximum Number 1" Spaces 2, 4, 6…42

Insert for 3-Phase 4-Wire Load Centers

Insert for Specials G or T = Factory installed ground bar B = Bottom feed main breaker FL = Factory installed feed-through lugs

D = Optional door for 6-8 circuit panel. (Doors standard on all units 12 circuits or greater) W = White Front

Enclosure Type C = Combination surface/flush F = Flush S = Surface

R = Outdoor

Bus Ampere Rating 40 = 40 Amps 20 = 200 Amps 70 = 70 Amps 22 = 225 Amps 10 = 100 Amps 30 = 300 Amps

12 = 125 Amps 40 = 400 Amps 15 = 150 Amps 60 = 600 Amps

1*1 15QLHT

GE Identification

Interrupting Rating H = 10kAlC HH = 22kAlC X = 65kAlC

Ground Fault/Arc Fault Circuit Interrupter

AF2 = 1- & 2-pole Combination Arc Fault Circuit Interrupter GFEP = 1- & 2-pole Ground Fault with Equipment Protection Interrupter–30 mA GFT = 1- & 2-pole Ground Fault with Self-Test Feature Interrupter - 5 mA DF = 1-pole Dual Function GFCI/AFCI Ground Fault & Combination Arc Fault Circuit Interrupter

Poles (1, 2, 3)

Type QL = 1" plug-in QP = 1/2" plug-in QB = 1" bolt-on

Ampere Rating

Voltage 1 = 120/240V

2 = 240V

*Omit character for THQP breakers, which are all 120/240V.

GFT

PowerMark Gold and Plus Load Centers

Product Number Guides

Product Number Guide for Load Centers

(Product number for illustrative purposes only)

Section 1Load Centers and Circuit Breakers

Product Number Guide for Q-Line Plug-in Circuit Breakers

(Product number for illustrative purposes only)

1-4

BuyLog™Catalog

www.geindustrial.com

Rev. 11/13

Data subject to change without notice

Load Centers and Circuit Breakers

Q-Line Plug-in Circuit Breakers

UL Listed (Molded Case Circuit Breakers No. 489) Federal Government Specification Qualified (WC-375B) 60°C / 75°C Conductor Rating Quick Make, Quick Break Box Type Terminals

Section 1

Q-Line Plug-in Circuit Breakers Specifications

Breaker Type Ampere Rating Cu Al

THQP

THQL

THHQL

TXQL

Solid or stranded for 14-10 AWG

15-25 14-8 12-8 30-50 8-4 8-4 15-30 14-8 12-8 35-60 8-3 8-3

70-100 6-1/0 4-1/0

110-125 2-2/0 2-2/0

Wire Size AWG/kcmil

THQP130

THQL2140

THQP230

THQL32015

THQL1120

Q-Line Plug-in Circuit Breakers

120/240 Vac 120/240 Vac 120/240 Vac 240 Vac 120/240 Vac 240 Vac 120/240 Vac

Ampere Product Product Product Product Product Product

Single Pole

Std. Pkg. 5 cartons of 20 5 cartons of 10 5 cartons of 10 5 cartons of 10

Two-Pole

Std. Pkg. 5 cartons of 10 5 cartons of 5 5 cartons of 5 5 cartons of 5 5 cartons of 5 5 cartons of 5

Three-Pole

Std. Pkg. 5 cartons of 3 5 cartons of 3 5 cartons of 3

UL Listed as HACR (heating, air conditioning and refrigeration).

UL Listed as SWD (switching duty). Suitable for 120 volts ac fluorescent lighting

loads.

15-100 amp UL Listed as HACR (heating air conditioning and refrigeration).

Required for three-phase and High Leg Delta Systems only.

Type THQP 1/2-inch Module Type THQL 1-inch Module Type THHQL 1-inch Module Type TXQL 1-inch Module

Rating Number Number Number Number Number Number

25 THQP125 THQL1125 – THHQL1125 – TXQL1125 30 THQP130 THQL1130 – THHQL1130 – TXQL1130 35 THQP135 THQL1135 – THHQL1135 –– 40 THQP140 THQL1140 – THHQL1140 –– 45 THQP145 THQL1145 – THHQL1145 –– 50 THQP150 THQL1150 – THHQL1150 ––

: Incorporates Internal Common Trip Bar

15 THQP215 THQL2115 THQL22015 20 THQP220 THQL2120 THQL22020 25 THQP225 THQL2125 THQL22025 30 THQP230 THQL2130 THQL22030 35 THQP235 THQL2135 THQL22035 40 THQP240 THQL2140 THQL22040 45 THQP245 THQL2145 THQL22045 50 THQP250 THQL2150 THQL22050 60 – THQL2160 THQL22060 70 – THQL2170 THQL22070 80 – THQL2180 THQL22080

90 – THQL2190 THQL22090 100 – THQL21100 THQL22100 110 – THQL21110 – THHQL21110 –– 125 – THQL21125 – THHQL21125 ––

: Incorporates Internal Common Trip Bar

15 ––THQL32015 – THHQL32015 TXQL32015

20 ––THQL32020 – THHQL32020 TXQL32020

25 ––THQL32025 – THHQL32025 TXQL32025

30 ––THQL32030 – THHQL32030 TXQL32030

35 ––THQL32035 – THHQL32035 –

40 ––THQL32040 – THHQL32040 –

45 ––THQL32045 – THHQL32045 –

50 ––THQL32050 – THHQL32050 –

60 ––THQL32060 – THHQL32060 –

70 ––THQL32070 – THHQL32070 –

80 ––THQL32080 – THHQL32080 –

90 ––THQL32090 – THHQL32090 – 100 ––THQL32100 – THHQL32100 –

THQP115 THQL1115 – THHQL1115 – TXQL1115 THQP120 THQL1120 – THHQL1120 – TXQL1120

10,000AIC 22,000AIC 65,000AIC

4 4 4 4 4 4 4 4 4 4 4 4 4

THHQL2115 THHQL22015 THHQL2120 THHQL22020 THHQL2125 THHQL22025 THHQL2130 THHQL22030 THHQL2135 THHQL22035 THHQL2140 THHQL22040 THHQL2145 THHQL22045 THHQL2150 THHQL22050 THHQL2160 THHQL22060 THHQL2170 THHQL22070 THHQL2180 THHQL22080 THHQL2190 THHQL22090 THHQL21100 THHQL22100

4 4 4 4 4 4 4 4 4 4 4 4 4

TXQL2115 TXQL2120 TXQL2125 TXQL2130 – – – – – – – – –

References:

Accessories Pages 1-24 thru 1-29 Auxiliary Switches and Shunt Trips BuyLog pages 6-40 thru 6-42

Rev. 11/13

Data subject to change without notice

BuyLog™Catalogwww.geindustrial.com

1-5

Load Centers and Circuit Breakers

Special Purpose Circuit Breakers

60°C / 75°F Conductor Rating Box Type Terminals Quick-Make, Quick-Break Multi-pole Breakers Incorporate Internal Common Trip

Section 1

Arc Fault

UL Listed Arc-Fault Circuit Interrupters No. 1699

Ampere Rating Product Number

10,000 AIC

22,000 AIC

Std. Pkg. 10 Cartons of 1

As of Jan. 1, 2008, 2005 NEC™requires combination AFCI.

Combination AFCI compliant with 2008 NEC™and later

For 2-Pole shared neutral applications use two 1-pole circuit breakers with a handle tie. See DET-719 for more details on our Arc Fault products.

15 THQL1115AF2 20 THQL1120AF2

15 THHQL1115AF2 20 THHQL1120AF2

1 Pole, 120/240 Volts ac

Dual Function GFCI/AFCI Ground Fault & Combination Arc Fault Circuit Breaker

UL Listed (Available December 2014)

Ampere Rating Product Number

10,000 AIC

22,000 AIC

Std. Pkg. 10 Cartons of 1

15 THQL1115DF 20 THQL1120DF

15 THHQL1115DF 20 THHQL1120DF

1 Pole, 120 Volts ac

Ground Fault with Self-Test Feature

cULus Ground Fault Circuit Interrupters UL943 ed5 (5 milliamperes)

1-Pole, 120 Volts ac 2-Pole, 120/240 Volts ac

3 3

10,000 AIC

22,000 AIC

UL & CSA

Ampere Rating Product Number Product Number

15 THQL1115GFT THQL2115GFT 20 THQL1120GFT THQL2120GFT 25 THQL1125GFT THQL2125GFT 30 THQL1130GFT THQL2130GFT 40 – THQL2140GFT 50 – THQL2150GFT

15 THHQL1115GFT – 20 THHQL1120GFT – 25 THHQL1125GFT – 30 THHQL1130GFT –

PowerMark Gold Main Circuit Breakers for use with 150A-225A PowerMark Gold Load Centers (Includes mounting base)

UL Listed.

Description Ampere Rating Product Number Lug Size

Main Circuit Breaker Kits 150 THQMV150D 1-300 (cu), 22,000 AIC 175 THQMV175D 2/0-300

Note: Wire bending rules affect allowed wire sizes when THQMV breakers are installed in an enclosure. For load centers, the wire range will be on the rating label. In addition, refer to the specifications for the main breaker versions of the load center you are considering to review allowed wire ranges when a TLMXX20 load center is converted to main breaker.

100 THQMV100D 125 THQMV125D

200 THQMV200D 225 THQMV225D

Arc Fault

THQL1115DF

THQL2120GFT

THQMV100D with filler plates

1-6

BuyLog™Catalog

www.geindustrial.com

Rev. 11/13

Data subject to change without notice

Load Centers and Circuit Breakers

Special Purpose Circuit Breakers

60°C / 75°F Conductor Rating Box Type Terminals Quick-Make, Quick-Break Multi-pole Breakers Incorporate Internal Common Trip

PowerMark Gold Main Circuit Breaker Kit

For use with 125A PowerMark Gold load Centers; 22kAIC RMS symmetrical.

Description Product Number

Main Circuit Breaker Kit - Order appropriate THQL TQMH000 10kAIC or THHQL 22kAIC breakers separately

Please review the footnotes listed with the individual Load Center product numbers for proper parts needed to convert to a main circuit breaker. This main breaker base is only applicable for 16 circuit and larger 125 amp load centers, 12 circuit load centers with A C24 suffix, and the TLM812RCU2.

Ground Fault with Equipment Protection

cULus Ground Fault Circuit Interrupters No. 943 30 milliampere ground fault trip level

10,000 AIC

Ampere Rating Product Number Product Number

15 THQL1115GFEP THQL2115GFEP 20 THQL1120GFEP THQL2120GFEP 30 THQL1130GFEP THQL2130GFEP

Std. Pkg. 10 Cartons of 1 10 Cartons of 1

1-Pole, 120 Volts ac 2-Pole, 120/240 Volts ac

Switching Neutral

UL Listed. 10kAIC RMS symmetrical. Standard 1- or 2-pole automatic breaker plus one fully-rated, non-automatic pole.

1-Pole Plus Switching Neutral 2-Pole Plus Switching Neutral

Ampere Rating Product Number Product Number

15 THQL21WY15 THQL31WY15 20 THQL21WY20 THQL31WY20 25 THQL21WY25 THQL31WY25 30 THQL21WY30 THQL31WY30

Std. Pkg. 5 cartons of 5 5 cartons of 3

120/240 Volts ac 120/240 Volts ac

"HID" Lighting

UL Listed as HID. HID breakers have been designed to handle the current and voltage spikes that result when gaseous discharge lamps, including fluorescent and HID lamps, are switched on and off.

Ampere Rating Product Number Product Number

10,000 AIC

22,000 AIC

Std. Pkg. 5 cartons of 10 5 cartons of 5

UL Listed as SWD (switching duty). Suitable for 120 volts ac fluorescent lighting loads.

15 THQL1115HID 20 THQL1120HID 30 THQL1130HID THQL2130HID

15 THHQL1115HID 20 THHQL1120HID 30 THHQL1130HID THHQL2130HID

1-Pole, 120/240 Volts ac 2-Pole, 120/240 Volts ac

2 2

THQL2115HID THQL2120HID

THHQL2115HID THHQL2120HID

High Magnetic

UL Listed. 10kAIC RMS symmetrical High short circuit setting suitable for circuits with inherent high-inrush load currents.

Ampere Rating Product Number

15 THQL1115HM 20 THQL1120HM 25 THQL1125HM 30 THQL1130HM 40 THQL1140HM 50 THQL1150HM

Std. Pkg. 5 cartons of 10

1-Pole, 120/240 Volts ac

Section 1

TQMH000

THQL21WY30

THQL2120HID

THQL1140HM

Rev. 11/13

Prices and data subject to change without notice

www.geindustrial.com BuyLog™Catalog

1-7

Special Purpose Circuit Breakers

60°C / 75°F Conductor Rating Box Type Terminals Quick-Make, Quick-Break Multi-pole Breakers Incorporate Internal Common Trip

Molded Case Switches

UL Listed Without overload or short circuit protection.

120/240 Volts ac

240 Volts ac

Std. Pkg. 5 cartons of 5 5 cartons of 3

Ampere Rating Product Number Product Number

60 TQL21Y60 –

100 TQL21Y100 –

60 TQL22Y60 TQL32Y60

100 TQL22Y100 TQL32Y100

Interlocking Circuit Breakers for use in PowerMark Gold Generator Panels

Two breakers required for interlocking.

Poles Ampere Rating Product Number

2 30 THQL2130GEN 2 60 THQL2160GEN

TQ Circuit Breakers

3/4" UL Classified Circuit Breakers for use in *Square D **QO Load Centers. 10 kAIC RMS symmetrical

Ampere Rating Product Number Product Number

15 TQ1115 TQ2115 20 TQ1120 TQ2120 30 TQ1130 TQ2130 40 TQ1140 TQ2140 50 TQ1150 TQ2150

Std. Pkg. 1 carton of 10 1 carton of 5

60 – TQ2160

THQL 120/240 Vac, with Factory Installed Shunt

# of Ampere 120/240 Vac Poles Rating Wire Range

1 15 (1) 14-8 Cu/12-8 Al 10kA THQL1115ST1 1 20 (1) 14-8 Cu/12-8 Al 10kA THQL1120ST1 1 30 (1) 14-8 Cu/12-8 Al 10kA THQL1130ST1 1 35 (1) 8-3 Cu/8-3 Al 10kA THQL1135ST1 1 40 (1) 8-3 Cu/8-3 Al 10kA THQL1140ST1 1 45 (1) 8-3 Cu/8-3 Al 10kA THQL1145ST1 1 50 (1) 8-3 Cu/8-3 Al 10kA THQL1150ST1 1

Shunt trip requires one additional pole of space.

THQL 120/240 Vac, Internal Common Trip with Factory Installed Shunt

# of Ampere 240 Vac Poles Rating Wire Range

2 15 14-8 Cu/12-8 Al 10kA THQL2115ST1 2 20 14-8 Cu/12-8 Al 10kA THQL2120ST1 2 30 14-8 Cu/12-8 Al 10kA THQL2130ST1 2 35 8-3 Cu/8-3 Al 10kA THQL2135ST1 2 40 8-3 Cu/8-3 Al 10kA THQL2140ST1 2 45 8-3 Cu/8-3 Al 10kA THQL2145ST1 2 50 8-3 Cu/8-3 Al 10kA THQL2150ST1 2 60 8-3 Cu/8-3 Al 10kA THQL2160ST1 2 70 6-1/0 Cu/4-1/0 Al 10kA THQL2170ST1 2 80 6-1/0 Cu/4-1/0 Al 10kA THQL2180ST1 2 90 6-1/0 Cu/4-1/0 Al 10kA THQL2190ST1 2 100 6-1/0 Cu/4-1/0 Al 10kA THQL21100ST1 3 20 14-8 Cu/12-8 Al 10kA THQL32020ST1 3 30 14-8 Cu/12-8 Al 10kA THQL32030ST1 3 40 8-3 Cu/8-3 Al 10kA THQL32040ST1 3 50 8-3 Cu/8-3 Al 10kA THQL32050ST1 3 60 8-3 Cu/8-3 Al 10kA THQL32060ST1 3 70 6-1/0 Cu/4-1/0 Al 10kA THQL32070ST1 3 80 6-1/0 Cu/4-1/0 Al 10kA THQL32080ST1 3 90 6-1/0 Cu/4-1/0 Al 10kA THQL32090ST1 3 100 6-1/0 Cu/4-1/0 Al 10kA THQL32100ST1 2

Solid or stranded for 14-10 AWG.

*Square D is a registered trademark of SNA Holdings, Inc. **QO is a registered trademark of the Square D Company.

2-Pole 3-Pole

1-Pole 2-Pole

Interrupting Rating Product Number

Section 1Load Centers and Circuit Breakers

TQL21Y100

TQ1120

TQ2120

THQL1130ST1

THQL2120ST1

THQL32020ST1

1-8

BuyLog™Catalog

www.geindustrial.com

Rev. 11/13

Data subject to change without notice

Load Centers and Circuit Breakers

Section 1

PowerMark Gold and Plus Load Centers

Single-Phase, Three-Wire, 120/240 Vac

Main Lugs Convertible to Main Breaker

Product Features

—UL Listed (Panelboards No. 67) —60°/75°C Conductor Rating —Suitable for Use as Service Entrance Equipment when Installed

in Accordance with the National Electrical Code —22kAIC RMS symmetrical, Except Where Noted —6-42 circuit devices UL Listed for bottom mounted lugs by

installing complete unit (box, interior and front) upside down. —For a listing of CSA Listed load centers, visit geindustrial.com.

TLM2020CCU TPL412R

Main Lugs Factory Installed (TLM units convertible to main breaker), Indoor (NEMA 1) Enclosure

Main 1 Pole, 2 Pole, 1 Pole, 2 Pole, Total Main Wire Size Ampere 1” 1” 1/2” 1/2” 1-pole Front Box (AWG/kcmil) Equipment Product Rating Spaces Spaces Spaces Spaces Spaces Type Feed Type1Number Cu-Al Ground Kit Number

40 21 41 4Surface Top 1A 14-4 TGK4 (order separately) TL240SCU

70 21 41 4Surface Top 1A 6-3 TGK4 (order separately) TL270SCU

125 42 83 8Combination Top 2A 1-2/0 TGL1 (order separately) TL412C

125 42 83 8Combination Top 2A 1-2/0 TGL1 installed TL412CT

125 42 83 8Thermoplastic Top 2 1-2/0 TGL1 (order separately) TPL412C

125 42 83 8Thermoplastic Top 2 1-2/0 TGL1 installed TPL412CT

125 6312 4 12 Flush Top 3A 6-1 TGL2 (order separately) TLM612FCU

125 6312 4 12 Flush Top 3A 6-1 TGL2 (order separately) TLM612FCUD

125 6312 4 12 Flush Top 3A 6-1 TGL2 installed TLM612FCUDG

125 6312 4 12 Surface Top 3A 6-1 TGL2 (order separately) TLM612SCU

125 6312 4 12 Surface Top 3A 6-1 TGL2 (order separately) TLM612SCUD

125 6312 4 12 Surface Top 3A 6-1 TGL2 installed TLM612SCUDG

125 8416 8 16 Flush Top 3A 6-1 TGL2 (order separately) TLM812FCU

125 8416 8 16 Flush Top 3A 6-1 TGL2 (order separately) TLM812FCUD

125 8416 8 16 Flush Top 3A 6-1 TGL2 (order separately) TLM812FCUDG

125 8416 8 16 Surface Top 3A 6-1 TGL2 (order separately) TLM812SCU

125 8416 8 16 Surface Top 3A 6-1 TGL2 (order separately) TLM812SCUD

125 8416 8 16 Surface Top 3A 6-1 TGL2 installed TLM812SCUDG

125 14 6 20 8 24 Combination Top 18 6-2/0 Included

125 14 6 20 8 24 White Combo Top 18 6-2/0 Included

Flush/Surface Bottom

Bottom

This table continued on next page

Indoor NEMA 1

1,8

1,2,8

1,2,3,8

TLM1212CCU

TLM1212CCUW

Load Center

1PH

Main Lug

4,8

7,8

7,8,9

Rev. 11/13

Data subject to change without notice

BuyLog™Catalogwww.geindustrial.com

1-9

Load Centers and Circuit Breakers

PowerMark Gold and Plus Load Centers

Section 1

Load Center

Single-Phase, Three-Wire, 120/240 Vac

Main Lugs Convertible to Main Breaker

Main Lugs Factory Installed (TLM units convertible to main breaker), Indoor (NEMA 1) Enclosure

125 16 8 16 6 24 Combination Top 4 6-2/0 TGK12 and TGK24 TLM1612CCU

125 16 8 16 6 24 Combination Top 4 6-2/0 TGK12 and TLK20 TLM1612CCUG

125 24 12 00 24 Combination Top 7 6-2/0 TGK24 and TGK32 TLM2412CCU

125 24 12 00 24 White Combo Top 7 6-2/0 TGK24 and TGK32 TLM2412CCUW

125 24 12 00 24 Combination Top 7 6-2/0 TGK24 and TLK20 TLM2412CCUG

200 16 8 32 14 32 Combination Top 7 6-250 TGK32 TLM1620CCU

200 16 8 32 14 32 White Combo Top 7 6-250 TGK32 TLM1620CCUW

200 16 8 32 14 32 Combination Top 7 6-250 TGK32 TLM1620CCUG

200 20 10 40 18 40 Combination Top 8 6-250 TGK32 TLM2020CCU

200 20 10 40 18 40 White Combo Top 8 6-250 TGK32 TLM2020CCUW

200 20 10 40 18 40 Combination Top 8 6-250 TGK42 TLM2020CCUG

200 24 12 36 18 42 Combination Top 9 1-3/0 (Cu), TGK24 and TLK32 TLM2420C42

200 32 16 20 8 42 Combination Top 11 1-250 (Cu), TGK32 and TLK20 TLM3220C42

200 32 16 16 6 40 Combination Top 11 6-250 TGK32 TLM3220CCU

200 32 16 16 6 40 White Combo Top 11 6-250 TGK32 TLM3220CCUW

200 40 20 00 40 Combination Top 13 6-250 TGK42 TLM4020CCU

200 40 20 00 40 White Combo Top 13 6-250 TGK42 TLM4020CCUW

200 42 20 00 42 Combination Top 14 1-300 (Cu), TGK42 TLM4220CCU

225 42 20 00 42 Combination Top 14 1-300 (Cu), TGK42 TLM4222CCU

No door

10 kAIC

125 amp maximum branch capacity.

For main breaker, order THQLRK2 retainer kit plus 2-pole circuit breaker. See page 1-28, 100 amp max.

For main breaker, order TQMH000. See page 1-24. Also order 2-pole THQL, THHQL, or TXQL circuit breaker. See page 1-5.

For main breaker, order THQMVXXXD circuit breaker from page 1-6.

For main breaker applications, use reverse feed THQL breaker or THHQL circuit breaker (see page 1-5) and THQLRK3 breaker retainer (see page 1-28).

No lock provision available. Use next size larger load center such as TLM1612CCU with a TDL106 accessory if locking provision is required.

Minimum order QTY is 40 for below 24 circuits; QTY 24 for 24 circuits and above. (See DEE-590)

Load center includes a factory installed ground bar and add-a-lug. See wiring diagram on page 1-30. A separate TGL2 can be added in the unlikey event

that another ground bar is required.

Flush/Surface Bottom (order separately)

Flush/Surface Bottom installed

Flush/Surface Bottom (order separately)

Flush/Surface Bottom installed

Flush/Surface Bottom (order separately)

Flush/Surface Bottom installed

Flush/Surface Bottom (order separately)

Flush/Surface Bottom installed

Flush/Surface Bottom 2/0-3/0 (Al) (order separately)

Flush/Surface Bottom 2/0-250 (Al) (order separately)

Flush/Surface Bottom (order separately)

Flush/Surface Bottom 2/0-300 (Al) (order separately)

Indoor NEMA 1

1PH

Main Lug

5,9

6,9

Note: See page 11-4, AL Series Lighting Panelboards as replacements for 300-600A load centers.

1-10

BuyLog™Catalog

www.geindustrial.com

Rev. 11/13

Data subject to change without notice

Load Centers and Circuit Breakers

PowerMark Gold and Plus Load Centers

Single-Phase, Three-Wire, 120/240 Vac

Main Lugs Convertible to Main Breaker

Section 1

Load Center

1PH

Main Lug

Outdoor NEMA 3R

Main Lugs Factory Installed (TLM units convertible to main breaker), Outdoor (NEMA 3R) Enclosure

Main 1 Pole, 2 Pole, 1 Pole, 2 Pole, Total Main Wire Size Ampere 1” 1” 1/2” 1/2” 1-pole Front Feed Rating Spaces Spaces Spaces Spaces Spaces Type Type Number Cu-Al Ground Kit Number

40 21 41 4 Top R1A 14-4 TGK4 (order separately) TL240RCU 70 21 41 4 Top R1A 6-3 TGK4 (order separately) TL270RCU 100 50 00 5Flush Top R41 6-3 TGL1 installed TL510RT 125 42 83 8 Top R1A 1-2/0 TGL1 (order separately) TL412R1 125 42 83 8 Top R1A 1-2/0 TGL1 installed TL412RT1 125 42 83 8 Top R41 1-2/0 TGL1 (order separately) TL412R2 125 42 83 8Thermoplastic Top R1 1-2/0 TGL1 (order separately) TPL412R

125 42 83 8Thermoplastic Top R1 1-2/0 TGL1 installed TPL412RT

125 4312 4 12 Top R2A 6-1 TGK12 (order separately) TLM612RCU 125 8416 8 16 Top R2A 6-1 TGK12 (order separately) TLM812RCU 125 8416 8 16 Top R3A 6-1 TGK12 (order separately) TLM812RCU2 125 14 6 20 8 24 Top R3A 6-2/0 Included TLM1212RCU 125 24 12 00 24 Top R4A 6-2/0 TGK24 (order separately) TLM2412RCU

150 24 12 12 4 30 Top R6A 1-3/0 (Cu), TGK24 (order separately) TLM2415RCU

200 12 6 24 10 24 Top R5A 6-250 TGK24 (order separately) TLM1220RCU 200 16 8 32 14 32 Top R5A 6-250 TGK32 (order separately) TLM1620RCU 200 20 10 40 18 40 Top R6A 6-250 TGK24 (order separately) TLM2020RCU

200 24 12 36 18 42 Top R39 1-250 (Cu), TGK24 (order separately) TLM2420R42

200 32 16 16 6 40 Top R7A 1-250 (Cu), 2/0-250 (Al) TGK32 (order separately) TLM3220RCU

200 40 20 00 40 Top R8A 6-250 TGK42 (order separately) TLM4020RCU

225 42 20 00 42 Top R8A 1-300 (Cu), TGK42 (order separately) TLM4222RCU

40-225 amp single-phase devices have removable closing caps. Larger ampere devices require field-cut openings. Order hubs separately. See page 1-27.

10 kAIC.

125 amp maximum branch capacity.

For main breaker, order THQLRK2 retainer kit plus 2-pole circuit breaker. See page 1-28, 100 amp maximum due to wire bending requirements.

For main breaker, order TQMH000. See page 1-24. Also order 2-pole THQL or THHQL circuit breaker. See page 1-5.

For main breaker, order THQMVXXXD circuit breaker from page 1-6.

For main breaker applications, use reverse feed THQL or THHQL circuit breaker (see page 1-5) and THQLRK3 breaker retainer (see page 1-28).

Main and branch breakers are limited to 70 amps.

Load center includes a factory installed ground bar and add-a-lug. See wiring diagram on page 1-30. A separate TGL2 can be added in the unlikey event

that another ground bar is required.

Box (AWG/kcmil) Equipment Product

2,8 2

Front

Bottom TGK32 (order separately)

Bottom 2/0-3/0 (Al) TGK32 (order separately)

TGK42 (order separately)

Bottom 2/0-250 (Al)

Bottom

Bottom 2/0-300 (Al)

2,3

4 4

5 7,9 5

6 6 6

Note: See page 11-4, AL Series Lighting Panelboards as replacements for 300-600A load centers.

Rev. 11/13

Data subject to change without notice

BuyLog™Catalogwww.geindustrial.com

1-11

Load Centers and Circuit Breakers

PowerMark Gold and Plus Main Breaker Load Centers

Single-Phase, Three-Wire, 120/240 Vac

Main Breaker Factory Installed

Section 1

Load Center

Main Breaker

Indoor NEMA 1

Product Features

—UL Listed (Panelboards No. 67) —60°C/75°C Conductor Rating —Suitable for Use as Service Entrance Equipment when Installed

in Accordance with the National Electrical Code —22kAIC RMS symmetrical, Except Where Noted —6-42 circuit devices UL Listed for bottom mounted lugs by

installing complete unit (box, interior and front) upside down. —For a listing of CSA Listed load centers, visit geindustrial.com.

TM820RCUFLTM2020CCU

Indoor (NEMA 1) Enclosure

Main 1 Pole, 2 Pole, 1 Pole, 2 Pole, Total Main Wire Size Ampere 1” 1” 1/2” 1/2” 1-pole Front Feed Box (AWG/kcmil) Equipment Product Rating Spaces Spaces Spaces Spaces Spaces Type Type Number Cu-Al Ground Kit Number

100 12 5 20 8 22 Combination Top 18 4-1/0 Included

100 24 12 0024 Combination Top 7 1-2/0 TGK24, TGK32 and TM2410CCU

100 20 10 0020 Combination Top 6 4-1/0 TGK24 (order separately) TM2010CCU

100 32 16 0032 Combination Top 11 4-1/0 TGK32 (order separately) TM3210CCU

125 12 5 20 8 22 Combination Top 18 1-2/0 Included

125 24 12 0024 Combination Top 7 1-2/0 TGK24 (order separately) TM2412CCU

125 16 8 16 6 24 Combination Top 4 1-2/0 TGK12 (order separately) TM1612CCU

125 16 8 16 6 24 Combination Top 4 1-2/0 TGK24 installed TM1612CCUG

150 16 8 32 14 32 Combination Top 7 1-3/0 (Cu), TGK24 (order separately) TM1615CCU

150 16 8 32 14 32 Combination Top 7 1-3/0 (Cu), TGK32 installed TM1615CCUG

Flush/Surface Bottom

Front

Flush/Surface Bottom TLK20 (order separately)

Front

Flush/Surface Bottom

Front

Flush/Surface Bottom

Front

Flush/Surface Bottom

Front

Flush/Surface Bottom

Front

Flush/Surface Bottom TGK24 (order separately)

Front

Flush/Surface Bottom

Front

Flush/Surface Bottom 2/0-3/0 (Al) TGK32 (order separately)

Front

Flush/Surface Bottom 2/0-3/0 (Al)

Front

TM1210CCU

TM1212CCU

This table continued on next page

1PH

1-12

BuyLog™Catalog

www.geindustrial.com

Rev. 11/13

Data subject to change without notice

Load Centers and Circuit Breakers

PowerMark Gold and Plus Main Breaker Load Centers

Single-Phase, Three-Wire, 120/240 Vac

Main Breaker Factory Installed

Section 1

Load Center

Main Breaker

Indoor NEMA 1

Indoor (NEMA 1) Enclosure

150 32 16 0032 Combination Top 11 1-3/0 (Cu), TGK32 (order separately) TM3215CCU

150 24 12 36 18 42 Combination Top 9 1-3/0 (Cu), TGK24 (order separately) TM2415C42

150 32 16 20 10 42 Combination Top 11 1-3/0 (Cu), TGK32 and TLK20 TM3215C42

200 16 8 32 14 32 Combination Top 7 1-250 (Cu), TGK32 (order separately) TM1620CCU

200 16 8 32 14 32 Combination Top 8 1-250 (Cu), TGK32 installed TM1620CCUG

200 20 10 40 18 40 Combination Top 8 1-250 (Cu), TGK32 (order separately) TM2020CCU

200 20 10 40 18 40 White Combo Top 8 1-250 (Cu), TGK24 (order separately) TM2020CCUW

200 20 10 40 18 40 Combination Top 8 1-250 (Cu), TGK32 (order separately) TM2020CCUG

200 20 10 40 18 40 White Combo Top 8 1-250 (Cu), TGK32 (order separately) TM2020CCUGW

200 32 16 16 6 40 Combination Top 11 1-250 (Cu), TGK32 (order separately) TM3220CCU

200 40 20 0040 Combination Top 13 1-250 (Cu), TGK42 (order separately) TM4020CCU

200 32 16 20 8 42 Combination Top 11 1-250 (Cu), TGK32 and TLK20 TM3220C42

200 42 20 0042 Combination Top 14 1-300 (Cu), TGK42 (order separately) TM4220CCU

225 42 20 0042 Combination Top 14 1-300 (Cu), TGK42 (order separately) TM4222CCU

Load center includes a factory installed ground bar and add-a-lug. See wiring diagram on page 1-30. A separate TGL2 can be added in the unlikey event

that another ground bar is required.

No lock provision available. Use next size larger load center such as TLM1612CCU with a TDL106 accessory if locking provision is required.

Minimum order QTY is 40 for below 24 circuits; QTY 24 for 24 circuits and above. (See DEE-590)

Flush/Surface Bottom 2/0-3/0 (Al)

Flush/Surface Bottom 2/0-3/0 (Al) TLK32 (order separately)

Flush/Surface Bottom 2/0-3/0 (Al) (order separately)

Flush/Surface Bottom 2/0-250 (Al)

Flush/Surface Bottom 2/0-250 (Al) TGK42 (order separately)

Flush/Surface Bottom 2/0-250 (Al)

Flush/Surface Bottom 2/0-250 (Al) (order separately)

Flush/Surface Bottom 2/0-300 (Al)

1PH

Load Center

Main Breaker

Outdoor NEMA 3R

Outdoor (NEMA 3R) Enclosure

Main 1 Pole, 2 Pole, 1 Pole, 2 Pole, Total Main Wire Size Ampere 1” 1” 1/2” 1/2” 1-pole Feed Box (AWG/kcmil) Equipment Product Rating Spaces Spaces Spaces Spaces Spaces Type Number Cu-Al Ground Kit Number

100 12 5 20 8 22 Top R3A 4-1/0 TGK12 (order separately) TM1210RCU

100 20 10 0030 Top R4 4-1/0 TGK24 (order separately) TM2010RCU 125 12 5 20 8 22 Top R3A 1-2/0 TGK12 (order separately) TM1212RCU

125 24 12 0024 Top R4 1-2/0 TGK24 (order separately) TM2412RCU 150 8416 6 16 Top R5 1-250 (Cu), 2/0-250 (Al) TGK24 (order separately) TM815RCUFL 150 16 8 32 14 32 Top R5 1-3/0 (Cu), 2/0-3/0 (Al) TGK24 (order separately) TM1615RCU

150 24 12 12 4 30 Top R6 1-3/0 (Cu), 2/0-3/0 (Al) TGK24 (order separately) TM2415RCU

150 24 12 36 18 42 Top R39 1-250 (Cu), 2/0-250 (Al) TGK24 (order separately) TM2415R42

150 32 16 0032 Top R7 1-3/0 (Cu), 2/0-3/0 (Al) TGK32 (order separately) TM3215RCU 200 8416 6 16 Top R5 1-250 (Cu), 2/0-250 (Al) TGK32 (order separately) TM820RCUFL 200 20 10 40 18 40 Top R6 1-250 (Cu), 2/0-250 (Al) TGK24 (order separately) TM2020RCU

200 24 12 36 18 42 Top R39 1-250 (Cu), 2/0-250 (Al) TGK24 (order separately) TM2420R42

200 32 16 16 6 40 Top R7 1-250 (Cu), 2/0-250 (Al) TGK32 (order separately) TM3220RCU 200 40 20 0040 Top R8 1-250 (Cu), 2/0-250 (Al) TGK42 (order separately) TM4020RCU 225 8416 6 16 Top R5 1-250 (Cu), 2/0-250 (Al) TGK24 (order separately) TM822RCUFL 225 42 20 0042 Top R8 1-300 (Cu), 2/0-300 (Al) TGK42 (order separately) TM4222RCU

100-225 amp devices have removable closing caps. Larger ampere devices require field-cut openings. Order hubs separately. See page 1-27.

Note: See page 11-4, AL Series Lighting Panelboards as replacements for 300-600A load centers.

TGK24 (order separately)

TGK32 (order separately)

Bottom

TGK42 (order separately)

Bottom

1PH

Rev. 11/13

Data subject to change without notice

BuyLog™Catalogwww.geindustrial.com

1-13

+ 29 hidden pages