Page 1
BRACKETS AND MOUNTING ACCESSORIES
FLOODLIGHTING BRACKETS FOR ALUMINUM
POLES WITH PLATE MOUNT
Floodlighting bracket, aluminum, for mounting on aluminum
poles, plate mount only. Bracket mounts multiple luminaires on
2-3/8-in. OD tenons.
BRACKET SELECTION TABLE
Number/ Adjacent Tenon
Placement See Ordering Tenon Top OD Weight EPA
Tenons Fig. Number Spacing A (in.) (in.) (lbs) (sq ft)
2 in line 1a FBAPB2T T 33 2-3/8 5 0.6
3 in line 1b FBAPC2TT 33 2-3/8 8 1.1
4 in line 1c FBAPD2TT 33 2-3/8 11 1.6
3 at 120° 1d FBAPE2TT 41 2-3/8 10 0.7
4 at 90° 1e FBAPF2T T 34 2-3/8 13 0.8
SPORTS LIGHTING CROSSARM BRACKETS
Sports lighting bracket , steel crossarm for mounting 2, 3, or 4
oodlights on wood poles.
BRACKET SELECTION TABLE
Number of See Pole Ordering Weight EPA
Floodlights Fig. Material Number (lbs) (sq ft)
2 2 wood SBSXBWPP 21 1.4
3 3 wood SBSXCWPP 54 3.9
4 4 wood SBSXDWPP 65 4.8
NOTE: If bracket is to be used for retrofitting an existing steel pole,
substitute S for W in ordering number listed in Selection Table.
NOTE: All brackets are prime painted. For galvanized brackets,
contact factory .
Bracket Size
Bracket Size
1d
Fig. 1
1a
1b
1c
1e
Fig. 2
Fig. 3
Fig. 4
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Page-1
OLP-2912
Page 2
BRACKETS AND MOUNTING ACCESSORIES
FLOODLIGHTING BRACKETS, STEEL BULLHORN
Floodlighting bracket steel bullhorn for pole with 2-3/8 in. or 4 in. OD top tenon.
Bracket has 2-3/8 in. top OD and is prime painted.
Figure 1
1a
1b
BRACKET SELECTION TABLE
Recommended
Size of Each
Number/ Max Max Tenon Mounting
Placement See Weight EPA Ordering Spacing OD Weight EPA
Tenons Fig. (lbs) (sq ft) Number A (in.) (in.) (lbs) (sq ft)
BRACKETS TO FIT POLES HAVING 2-3/8 IN. OD TOP TENON
2 in line 1a 100 5.0 FBSB2B2TTPP 36 2-3/8 21 1.0
3 in line 1b 100 3.8 FBSB2C2TTPP 30 2-3/8 32 1.6
4 in line 1c 100 3.0 FBSB2D2TTPP 30 2-3/8 44 2.3
3 at 120° 1d 100 3.8 FBSB2E2TTPP 41 2-3/8 34 1.3
4 at 90° 1e 100 3.0 FBSB2F2TTPP 34 2-3/8 44 1.6
BRACKETS TO FIT POLES HAVING 4 IN. OD TOP TENON
3 in line 1b 125 6.0 FBSB4C2TTPP 36 2-3/8 37 1.9
4 in line 1c 125 6.0 FBSB4D2TTPP 36 2-3/8 67 2.6
3 at 120° 1d 125 6.0 FBSB4E2TTPP 41 2-3/8 38 1.5
4 at 90° 1e 125 6.0 FBSB4F2TTPP 34 2-3/8 48 1.6
NOTE: All brackets are prime painted. For galvanized brackets, substitute GV for PP in ordering
number listed in Selection Table.
Luminaire
Adjacent Luminaire
Bracket Size
ROADWAY BRACKETS, STEEL UPSWEEP AND STRAIGHT
FOR 2-3/8 IN. OD POLE TOP TENONS
Roadway bracket steel upsweep or straight , for poles with 2-3/8 in. OD pole top
tenons. Bracket has 2-3/8 in. OD and is prime painted.
1d
Figure 2
2a
1c
1e
BRACKET SELECTION TABLE
Recommended
Size of Each
Number/ Max Max Luminaire
Placement See A B Weight EPA Ordering Mounting Weight EPA
Tenons Fig. (ft) (in.) (lbs) (sq ft) Number OD (in.) (lbs) (sq
STEEL UPSWEEP BRACKET FOR 2-3/8 IN. OD TOP TENON
1 2a 6 24 75 2.0 RBSU2H6PP 2-3/8 29 1.5
2 at 180° 2b 6 24 75 2.0 RBSU2J6PP 2-3/8 54 2.8
3 at 120° 2c 4 24 75 2.0 RBSU2K4PP 2-3/8 76 1.8
4 at 90° 2d 4 24 75 2.0 RBSU2L4PP 2-3/8 99 2.9
STEEL STRAIGHT BRACKET FOR 2-3/8 IN. OD TOP TENON
1 3a 2 5 125 6.0 RBSS2H2PP 2-3/8 12 0.6
2 at 180° 3b 2 5 125 6.0 RBSS2J2PP 2-3/8 18 1.0
3 at 120° 2c 2 5 125 6.0 RBSS2K2PP 2-3/8 26 1.0
4 at 90° 2d 2 5 125 6.0 RBSS2L2PP 2-3/8 32 1.4
NOTE: All brackets are prime painted. For galvanized brackets, substitute GV for PP in ordering number listed in Selection Table.
Bracket
Dimensions
Luminaire
Bracket Size
2b
2c 2d
Figure 3
3b
3a
Page-2
OLP-2912
Page 3
BRACKETS AND MOUNTING ACCESSORIES
ROADWAY BRACKETS FOR WOOD POLE MOUNTING
Roadway bracket aluminum or galvanized steel for mounting on wood poles,
pipe sizes from 1-1/4 to 2-in. (32 to 51mm).
Cantilever
Fig. 1
Double-guy
Fig. 3
Single-guy
Fig. 2
Tapered Elliptical
Fig. 4
BRACKET SELECTION TABLE
Thru bolts and lag screws not included
Recommended Size of
Each Luminaire 80 MPHI
(For high wind velocities,
Nominal
Length
(ft) (M) Fig. (lbs) (kgs) (sq ft) (sq M) Number (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (lbs) (kgs
ALUMINUM PIPE BRACKETS
4 1.2 1 40 18 0.9 0.08 RBACWH4X1.25 1-1/4 32 45 1143 18-9/16 217 8-1/4 210 3.5 1.6
6 1.8 1 35 16 0.7 0.07 RBACWH6X1.25 1-1/4 32 69 1753 24-1/16 611 8-1/4 210 4.5 2.0
2.5 0.8 1 90 41 2.3 0.21 RBACWH2.5X2 2 51 30 762 15-1/8 384 8-1/4 210 3.5 1.6
4 1.2 1 70 32 1.8 0.17 RBACWH4X2 2 51 45 1143 18-3/8 467 8-1/4 210 4.5 2.0
6 1.8 1 50 23 1.4 0.13 RBACWH6X2 2 51 69 1753 24 610 8-1/4 210 6.0 2.7
6 1.8 2 80 36 1.4 0.13 RBAGWH6X2 2 51 69 1753 24 610 21 533 7.5 3.4
8 2.4 2 60 27 0.7 0.07 RBAGWH8X2 2 51 93 2362 29-5/8 752 23 584 9.5 4.3
8 2.4 3 70 32 1.4 0.13 RBADWH8X2 2 51 93 2362 29-5/8 752 23 584 12.5 5.7
10 3.0 3 50 23 0.9 0.08 RBADWH10X2 2 51 117 2972 35-1/4 895 25 635 14.5 6.6
12 3.7 3 40 18 0.7 0.07 RBADWH12X2 2 51 141 3581 40-7/8 1038 27 686 16.5 7.5
GALVANIZED STEEL PIPE BRACKETS
2.5 0.8 1 90 41 2.3 0.21 RBSCWH2.5X1.25GV 1-1/4 32 30 762 15-1/4 387 8-1/4 210 7.5 3.4
4 1.2 1 70 32 1.8 0.17 RBSCWH4X1.25GV 1-1/4 32 45 1143 18-7/16 468 8-1/4 210 10.0 4.5
6 1.8 1 45 21 1.4 0.13 RBSCWH6X1.25GV 1-1/4 32 69 1753 14-1/16 357 8-1/4 210 14.0 6.3
2.5 0.8 1 90 41 2.8 0.26 RBSCWH2.5X2GV 2 51 30 762 15-1/8 384 8-1/4 210 11.0 5.0
4 1.2 1 90 41 2.3 0.21 RBSCWH4X2GV 2 51 45 1143 18-3/8 467 8-1/4 210 15.5 7.0
6 1.8 1 70 32 2.0 0.19 RBSCWH6X2GV 2 51 69 1753 24 610 8-1/4 210 21.0 9.5
8 2.4 1 45 20 1.4 0.13 RBSCWH8X2GV 2 51 93 2362 29-5/8 752 8-1/4 210 27.5 12.5
10 3.0 2 60 27 1.2 0.11 RBSGWH10X2GV 2 51 117 2972 35-1/4 895 25 635 37.5 17.0
12 3.7 2 50 23 0.7 0.07 RBSGWH12X2GV 2 51 141 3581 40-3/8 1026 27 686 45.0 20.4
14 4.3 3 40 18 0.7 0.07 RBSDWH14X2GV 2 51 165 4191 46-1/2 1181 30 762 58.5 26.5
16 4.9 3 35 16 0.7 0.07 RBSDWH16X2GV 2 51 189 4801 52-1/8 1324 33 838 66.0 29.9
4 1.2 NOTE 90 41 2.3 0.21 RBSPWH4X2GV 2 51 45 1143 18-3/8 467 8-1/4 210 16.0 7.3
ALUMINUM TAPERED ELLIPTICAL BRACKETS
4 1.2 4 55 25 1.6 0.15 RBATWH4X2 2 51 42 1067 16 406 4-5/8 117 6.0 2.7
6 1.8 4 53 24 1.6 0.15 RBATWH6X2 2 51 66 1676 24 610 4-3/4 121 10.0 4.5
8 2.4 4 53 24 1.2 0.11 RBATWH8X2 2 51 90 2286 30 762 6-1/8 156 14.0 6.3
10 3.0 4 44 20 1.2 0.11 RBATWH10X2 2 51 114 2896 30 762 7 178 17.0 7.7
4 1.2 NOTE 60 27 1.6 0.15 RBAPWH4X2 2 51 48 1219 30 762 15 381 9.0 4.1
NOTE: Bracket has a flat plate for wall mounting. For hole sizes and location of holes in plate, consult factory.
consult factory)
Max Weight Max EPA
See Ordering
Pipe
Size
Bracket
Dimensions
A B C
Weight
OLP-2912
Page-3
Page 4
BRACKETS AND MOUNTING ACCESSORIES
SINGLE AND DOUBLE FLOODLIGHT BRACKETS
WOOD POLE MOUNTING
Single Floodlight Bracket For Wood Pole Mounting
• Most items in stock for immediate shipment
• Mounting hardware not included
• Finish: Primer
• For hot dip galvanized, substitute "G" in place of "P"
FIG. 1 FIG. 2
STEEL
Ordering Number Pipe Size A B WT/LBS
SF-18P 2" 18" 23" 15
SF-07P 2" 7" 20" 11
TENON REDUCER BRACKETS FOR POLE TOP
MOUNTING (FIG. 1)
• Shipped with mounting hardware assembled
• Red primer painted (Standard)
Ordering Number A OD (in.) B ID (in.) C (in.) D (in) Weight (lbs)
TR-30-2P 2-3/8 3-1/4 6-1/4 4 8
TR-35-2P 2-3/8 3-13/16 6-1/4 4 10
TR-40-2P 2-3/8 4-1/4 6-1/4 4 11
TR-45-2P 3 4-1/4 6-1/4 4 12
NOTE: For hot dip galvanized, substitute “G” for “P”.
REMOVABLE TENON ADAPTER FOR SQUARE STEEL
POLES (FIG. 2)
• Mounting hardware not included
• Red primer painted or hot dip galvanized
Ordering Number A (in.) B (in.) C (in.) Weight (lbs)
RTASQ-4-2P 2-3/8 3 13-3/4 7
RTASQ-4-2G 2-3/8 3 13-3/4 8
RTASQ-5-2P 2-3/8 4 13-3/4 8
RTASQ-5-2G 2-3/8 4 13-3/4 9
RTASQ-6-2P 2-3/8 5 13-3/4 17
RTASQ-6-2G 2-3/8 5 13-3/4 19
DOUBLE RIGHT ANGLE BRACKET (FIG. 3)
• Red primer painted
Ordering Number A (in.) B (in.) Weight (lbs)
DRAB-P 30 8-1/2 22
FIG. 3
Page-4
OLP-2912
Page 5
BRACKETS AND MOUNTING ACCESSORIES
VERTICAL TENON BRACKET (FIG. 4)
• Mounting hardware not included
• Red primer painted
Ordering Number A (in.) B (in.) Weight (lbs)
VT2-4P 2-3/8 4 5
NOTE: For hot dip galvanized, substitute “G” for “P”.
RIGHT ANGLE BRACKET FOR SQUARE STEEL POLE
MOUNTING (FIG. 5)
• Mounting hardware not included
• Red primer painted
Ordering Number Pole Size (in.) A (in.) B (in.) Weight (lbs)
RABX-4P 4 12 13 8
RABX-5P 5 12 13 8
RABX-6P 6 12 13 9
NOTE: For hot dip galvanized, substitute “G” for “P”.
RIGHT ANGLE BRACKET FOR SQUARE STEEL POLE
MOUNTING (FIG. 6)
• Mounting hardware not included
• Red primer painted
Ordering Number Pole Size (in.) A (in.) B (in.) Weight (lbs)
RABHX-4P 4 8-1/2 8 10
RABHX-5P 5 8-1/2 8 10
RABHX-6P 6 8-1/2 8 11
RABHX-14-4P 4 14-1/2 8 12
RABHX-14-5P 5 14-1/2 8 12
RABHX-14-6P 6 14-1/2 8 13
NOTE: For hot dip galvanized, substitute “G” for “P”.
FIG. 4
FIG. 5
FIG. 6
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Page-5
OLP-2912
Loading...