GE Oil & Gas
Roots* Blowers,
Compressors
and Controls
GE continues a history of discovery,
innovation and technical leadership
GE Oil & Gas is a global leader in the design
and manufacture of air and gas handling
solutions. GE leverages its history of technical
innovation to address key environmental issues
and to provide quality manufactured products
to customers around the globe.
Roots blowers, compressors and controls
have been applied to multiple applications in a
wide array of industries such as: pneumatic
conveying, gas separation, wastewater treatment,
steam recompression, petrochemical production,
and many others.
Roots products are available in varying size
ranges with a broad spectrum of performance
and controllability.
1
Universal RAI* Blower
Heavy-duty, bi-lobe rotary blowers
in a compact, sturdy design
engineered for continuous use with
exceptional reliability.
••
Cost effective design
••
Pressures to 15 psig (1034 mbar)
••
Vacuums to 16” Hg (539 mbar)
••
Flows to 2370 cfm (4026 m3/hr)
••
Available with metric drive shaft
and pipe connections
Universal RAI* DSL Blower
This model features Dual Splash
Lubrication (DSL) on both the
gear end and drive end. Dual splash
lube provides:
••
More oil capacity
••
Cooler operation
••
Greater reliability
••
Available with metric drive
shaft and pipe connections
Universal RAI-J* Blower
Incorporates Roots WHISPAIR*
technology to reduce noise levels
3-5 dBA.
Universal RAI-G* Blower
This model features mechanical
seals that virtually eliminate leakage.
••
1/8” (0.3137 cm) NPT purge
port for buffer gas applications
Universal RAI-J* DSL Blower
DSL features are incorporated
into the Universal RAI-J model for
long life and quiet performance.
••
All of the Universal RAI
family of blowers feature
detachable feet, allowing you
to mount the blower into your
custom system
2
RAM-J Blower
Incorporates Roots WHISPAIR
technology to reduce noise levels.
••
Pressure to 18 psig (1240 mbar)
••
Vacuum to 16” Hg (539 mbar)
••
Flows to 3550 cfm (6030 m3/hr)
RAM-GJ Blower
Standard gas blowers suitable
for both vacuum and pressure
service. Features a piston ring
system between the compression
and vent cavities
••
Long life mechanical seals
offer superior protection and
containment
RAM-VJ Blower
RAM WHISPAIR units are available
with an inlet spray nozzle and
seal water flow meter for water
injection. This feature cools the
vacuum unit to enable it to reach
deeper vacuum.
••
Vacuum to 24” Hg (813 mbar)
••
Flows to 2500 cfm (4250 m3/hr)