GE RM94948 User Manual

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 1

RM94948

Universal

Remote Control

INSTRUCTION

MANUAL

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 2

Table of Contents

Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Setting Up Your Universal Remote . . . . . . . . . . . . . . . .3

Programming Your Universal Remote For:

TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

VCR or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

Cable Box or Other Device . . . . . . . . . . . . . . . . . .7-8

Operating A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Operating A Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . .9

Operating a DVD Player . . . . . . . . . . . . . . . . . . . . . . .10

Operating A VCR . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

Programming Using Code Search . . . . . . . . . . . . . . . .11

Code Retrieval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Operating A TV/VCR Combo Unit . . . . . . . . . . . . . . .13

Special Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Lost Your Codes? . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Code Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-35

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 3

Button Description

Indicator Light

Flashes to show that the remote is working.

POWER

Operates the same as on your original remote.

Device Buttons(TV,VCR/DVD, CBL/AUX)

The TV, VCR/DVD, and CBL/AUX buttons are used to select the home entertainment device you want to control.

MUTE

Operates the same as on your original remote.

V O L U M E a n d C H A N N E L Operate the same as on your original remote. These buttons are also used to enter the code for your device. The CHANNEL buttons are also used to control the SKIPfunctions for DVD and CD Players.

VCR Buttons The REV (Rewind/Reverse), PLAY, FOR (Fast Forward), REC (Record), STOP, and PAUSE buttons control the

same functions as those found on your VCR remote. The REV and FOR are also used to control the REVERSE and FORWARD functions for DVD and CD Players.

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 4

Setting Up Your Universal Remote

Place batteries in the remote

Remove the battery compartment cover.

2. Place two AAAbatteries as

shown, matching the + and – end of each battery as indicated in the battery compartment.

3. Replace the cover.

Determine if your remote needs programming

(Some RCA, GE and ProScan devices may already be

1. Press the button of the device

2. If the device turns on, press

3. If the device you selected

4. Repeat steps 1-3 for other

pre-programmed. )

you want to control (for example TV).

another button to confirm (for example

CHANNEL UP).

(TV) responds, you will not need to program the remote. If the device you selected (TV) does not respond, you will need to program the remote.

devices.

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 5

Programming TV Using Code Lists

1. Manually turn on the TV.

2.Find the code for your

brand in the list starting below.

3.Press and hold the TV but-

ton for five (5) seconds, the Indicator Light will light up.

4.Release the TV button.

The following buttons stand for each digit of the code:

1st Digit 2nd Digit 3rd Digit

5.Enter the first digit in the

code with the REV button. Example: if the first number is 3, depress the REV button three times. If the number is 0, do not press REV and proceed to next step.

1STCODE

NUMBER

Note: The Indicator Light will blink after each number is entered.

6.Enter the second digit in

the code with the PLAY button the same way as in step 5. If the number is 0, do not press PLAYand proceed to next step.

2NDCODE NUMBER

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 6

Programming TV Using Code Lists (con’t)

7.Enter the third digit in the

code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and proceed to next step.

8.Press STOP after code is entered and the Indicator Light will turn off.

9. With your TV on, press CHANNEL Up. If the TV responds, no further programming is required.

10.Enter your code here for

easy reference.

3RDCODE

NUMBER

TV CODE

Programming VCR or DVD Player Using Code Lists

1. Manually turn on the VCR.

2.Find the code for your brand in the list starting below.

3.Press and hold the VCR/DVD button for five (5) seconds, the Indicator Light will light up.

4.Release the VCR/DVD button.

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 7

Programming VCR or DVD Player Using Code Lists (con’t.)

The following buttons stand for each digit of the code:

1st Digit 2nd Digit 3rd Digit

5.Enter the first digit in the

code with the REV button. Example: if the first number is 3, depress the REV button three times. If the number is 0, do not press REV and proceed to next step.

Note: The Indicator Light will blink after each number is entered.

6.Enter the second digit in the

code with the PLAY button the same way as in step 5. If the number is 0, do not press PLAYand proceed to next step.

1STCODE

NUMBER

2NDCODE

NUMBERX

7.Enter the third digit in the

code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and proceed to next step.

8.Press STOP after code is entered and the Indicator Light will turn off.

3RDCODE

NUMBERX

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 8

Programming VCR or DVD Player Using Code Lists (con’t.)

9. With your VCR or DVD player on, press CHANNEL Up. If the VCR or DVD player responds, no further programming is required.

10. Enter your code here for

easy reference.

VCR/DVD CODE

Programming Cable Box Using Code Lists

1. Manually turn on the Cable

Box.

2.Find the code for your brand in the list starting on the next page.

3.Press and hold the CBL/AUX button for five (5) seconds, the Indicator Light will light up.

4.Release the CBL/AUX button. The following buttons stand

for each digit of the code:

1st Digit 2nd Digit 3rd Digit

5.Enter the first digit in the code with the REV button. Example: if the first number is 3, depress the REV button three times. If the number is 0, do not press REV and proceed to next step.

1STCODE

NUMBER

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 9

Programming Cable Box Using Code Lists

Note: The Indicator Light will blink after each number is entered.

6.Enter the second digit in the

code with the PLAY button the same way as in step 5. If the number is 0, do not press PLAY and proceed to next step.

7.Enter the third digit in the

code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and proceed to next step.

8.Press STOP after code is entered and the Indicator

Light will turn off.

2NDCODE

NUMBER

3RDCODE

NUMBERX

9. With your Cable Box on, press CHANNEL Up. If the Cable Box responds, no further programming is required.

10. Enter your code here for

easy reference.

CABLE/ OTHER

D E V I C EB O X CODE

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 10

Operating A TV

Turning the TV On and Off.

Press TV to set the remote to control the TV (most RCA, GE and ProScan models will only turn on when pressing TV not power).

2. Press POWER to turn the

TV on or off.

Change Channels and Volume on the TV.

P ress VOLUME UP or V O L U M E DOWN to change volume on

the TV. P ress CHANNEL UP or C H A N- NEL DOWN to change channels on the TV.

Operating A Cable Box

Turning the Cable Box On or

Off.

1. Point the remote at the

cable box and press

CBL/AUX.

2. Press POWER to turn it on

or off.

Changing Channels on the Cable Box.

Press CHANNEL UP or CHANNEL DOWN to change chan-

nels on the cable box.

94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 11

Operating A DVD Player

Turning the DVD Player On and Off.

Point the remote at the DVD player and press VCR/DVD.

2. Press POWER to turn the

DVD player on or off.

3. P ress CHANNEL UP or C H A N- NEL DOWN for DVD S K I P

f u n c t i o n s .

4 . Use R E Vand F O Rfor DVD

reverse and forward funct i o n s .

Operating A VCR

Turning the VCR On or Off.

1. Press VCR/DVD to set the

remote to control the VCR. (Most RCA, GE and ProScan models will only turn on when pressing

VCR/DVD

2. Press POWER to turn the

VCR on or off.

Using a tape in your VCR.

1. Turn on the VCR.

2. Insert a tape in the VCR.

3. Press PLAY to start the tape.

not

POWER.

)

+ 25 hidden pages