GE RM94931 User Manual [en, es]

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 1

RM94931

Universal

Remote Control

INSTRUCTION

MANUAL

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 2

Table Of Contents

Button Description . . . . . . . . . . . . . . . . . . 1-2

Battery Installation. . . . . . . . . . . . . . . . . . . . 2

Programming for TV. . . . . . . . . . . . . . . . . . . 4

Programming for VCR . . . . . . . . . . . . . . . . . 5

Programming for Cable Box or Satellite . . . 6

DVD or AUX Button . . . . . . . . . . . . . . . . . . . 7

Code Search. . . . . . . . . . . . . . . . . . . . . . . . . 8

Retrieving Codes . . . . . . . . . . . . . . . . . . . . . 9

Television Menu Function . . . . . . . . . . . 10-11

DBS Menu Function . . . . . . . . . . . . . . . 12-13

Sleep Feature. . . . . . . . . . . . . . . . . . . . . . . 14

Trouble Shooting . . . . . . . . . . . . . . . . . 15-16

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Instructions in Spanish . . . . . . . . . . . . . 17-31

Device Codes. . . . . . . . . . . . . . . . . . . . . 32-36

Button Description

INDIC ATOR LIGHT

The Indicator Light flashes to show that the remote is working.

ON•OFF

The ON•OFF button operates the same as your original remote (note: some RCA, GE and ProScan models require you to press the device key to turn the device on and the ON•OFF key to turn the device off).

CODE SEARCH

Used to program the remote or to search through codes.

TV, VCR, D VD•A UX, CBL•S AT

The TV , VCR, DVD•AUX and CBL•SAT buttons are used to select the device you want to control.

REVERSE, PLA Y, FOR WARD , REC ORD , STOP, PAUSE

The REVERSE, PLAY, FORWARD, RECORD, STOP and PAUSE buttons operate the same as on your original VCR remote. You must press the RECORD button twice to begin recording. Buttons also control similiar functions for DVD and CD players.

TV•V CR

The TV•VCR button operates the TV•VCR function of your VCR.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 3

ENTER

The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process.

VOL & CHAN The VOL (Volume) and CH (Channel) buttons increase or decrease channel numbers or volume.

MUTE

To MUTE the volume on the TV. PREV CH

PREV CH allows you to go to the previous channel you selected. Operates the same as Last Channel, Go Back or Recall button on your original remote.

0-9

The number buttons operate the same as on your original remote, and are used for entering device codes or channel numbers.

The MENU button calls up the TV and DBS set up menus.

Activates lighted keys. Keys remain lit for about 10 seconds.

Battery Installation

Your Universal Remote requires four (4) new AAA alkaline batteries. To install the batteries:

1. On the back of the remote, push and slide the cover off.

2.Match the batteries to the + and marks inside the battery case, then insert the batteries.

3.Press and slide the battery cover back into place.

Note: Programmed codes will remain in memory for a short period of time allowing for battery replacement. If batteries have been dead for a prolonged period of time, reprogramming may be required.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 4

Button Description

Programming For TV

1. Manually turn on the TV.

2. Press and hold the

SETUP button until the INDICATOR LIGHT lights, then release the SETUP button.

3. Press and release the

TV button (the INDICATOR LIGHT will blink then remain lit).

4. Find the three digit

code for your TV in the TV code list, and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.

5. Aim the remote at your

TV and press the ON•OFF button. Your TV should turn off.

Note: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.

6. With your TV on, press

CH+. If the TV responds, no further programming is required.

7. Enter your code here

for easy reference.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 6

Programming For VCR

1. Manually turn

on the VCR.

2. Press and hold

the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button.

3. Press and release

the VCR button (the INDICATOR LIGHT will blink then remain lit).

4. Find the three digit

code for your VCR in the code list and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.

5. Aim the remote at

your VCR and press the ON•OFF button. Your VCR should turn off.

Note: If your VCR does

not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.

6. With your VCR on,

press CH+. If the VCR responds, no further programming is required.

7. Enter your code

here for easy reference.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 7

Programming For Cable Box or Satellite Receiver

The CBL • SAT button is defaulted to RCA/GE/ProScan DBS systems, however other DBS systems can be programmed to this button.

1. Manually turn on

the Cable Box.

2. Press and hold the

SETUP button until the INDICATOR LIGHT lights, then release the SETUP button.

3. Press and release

the CABLE button (the INDICATOR LIGHT will blink then remain lit).

4. Find the three digit

code for your Cable Box or Satellite Receiver in the code list and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.

5. Aim the remote at

your Cable Box or satellite receiver and press the ON•OFF button. Your Cable Box should turn off.

Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.

6. With your Cable Box

on, press CH+. If the Cable Boxor satellite receiver responds, no further programming is required.

7. Enter your code here

for easy reference.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 8

The DVD•AUX Button

The DVD•AUX button can be used for a DVD player. It can also be assigned to any other type of device (another TV, VCR, DVD, CD Player, or audio receiver).

1. Manually turn on the

the device you wish to assign to the DVD•AUX button (TV, VCR or Cable Box or DVD Player).

2. Press and hold the

SETUP button until the INDICATOR LIGHT lights, then release the SETUP button.

3. Press and release the

DVD•AUX button. The INDICATOR LIGHT will blink.

4. Find the three digit code

for the device you wish to program in the code list Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.

5. Aim the remote at your

device and press the ON•OFF button. Your device should turn off.

Note: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.

6. With your device on,

press CH+. If the device responds, no further programming is required.

7. Enter your code here

for easy reference.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 9

Programming With Code Search

If your TV ,VCR, DVD.CD player, satellite receiver, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.

1. Turn on the device

you wish to program.

2. Press and hold SETUP

until the INDICATOR LIGHT lights, then release SETUP.

3. Press and release the

device button for the device you are programming. The I N D I C ATOR LIGHT will blink once then remain lit.

4. Press and release

ON•OFF until your device turns off.

Important: You may have to press ON•OFF up to 200 times.

5. When your device

turns off, press the ENTER button, the INDICATOR LIGHT will go off.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 10

Retrieving Codes

If you need to find the three-digit code for your TV, VCR, DBS Receiver, or Cable Box after your device is set-up using Code Search, use this procedure.

1. Press and hold SETUP

until the INDICATOR LIGHT lights, then release SETUP.

2. Press and release the

device button for the d e v i c e’s code you are retrieving . The I N D I C ATOR LIGHT will blink once then remain lit.

3. Press and release

SETUP.The INDICATOR LIGHT will turn off.

4. Starting with 0 on the

keypad, press the number buttons in order (0-9) until the INDICATOR LIGHT blinks.

5. The number which

causes the INDICATOR LIGHT to blink is the first digit of your code.

6. Repeat step 4 until you

have retrieved all three numbers in the code.

94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 11

Television Menu Function

The TV Menu is used to make changes in the TV settings such as setting color, channels, timers, etc.

Entering the TV Menu Mode:

1. Push the TV button

on the remote.

2. Push the MENU button.

This puts the remote in TV Menu Mode. The TV Menu should now be visible on the television. The INDICATOR LIGHT will blink continuously to indicate the remote is now in TV Menu Mode.

While in TV MENU these buttons will function as follows:

VOL UP/DOWN buttons will operate as CURSOR RIGHT/LEFT

CH+/- keys will operate as CURSOR UP/DOWN.

For RCA, GE, and ProScan TVs, pushing the MENU button will select the highlighted item. The numberic buttons may also be used to select the MENU choice. Note: Not all functions in competitive models and brands of televisions may be fully supported.

+ 25 hidden pages