GE RM84964 User Manual
RM24964
RM84964
Universal Remote
Instruction Manual
Table of Contents
Setup
Setup .................................................................... 3
Battery Installation ........................................... 3
Battery Saver ................................................... 3
Code Setup ...................................................... 3
Button Functions .................................................. 4
Code Entry ........................................................... 6
Direct Code Entry ............................................ 6
Code Search .................................................... 7
Using Your Remote ............................................... 8
Code Identification ........................................... 8
Sleep Function................................................. 9
Controlling Devices with Power On and Off .... 10
Controlling Combo Devices ............................ 10
VCR/DVD/DVR Punch-Through ..................... 10
Volume/Mute Control and Punch-Through ....... 11
All Volume/Mute Control to any one Mode ......11
Setting any Mode for its own Volume/Mute .... 12
Troubleshooting .................................................. 13
Congratulations on your purchase of this universal
remote control. All GE brand universal remotes are
easy to set up and use. We think you’ll enjoy the
unique sliding case feature and compact design this
remote offers. It controls up to three devices,
including the most popular brands of TV, VCR, DVD,
CBL, SAT equipment.
Note: Some functions from your original remote may
not be controlled by this remote. Use the original
remote, if available, to control such functions.
Sometimes buttons other than described in these
instructions may actually perform the function. For
example, the CHAN and VOL buttons might be
used to navigate through menu choices. We
recommend you experiment with the remote to
identify if such situations pertain to your equipment.
The Slider is easy to use, easy to program, and it
gives you total control—at the touch of your
fingertips!
Battery Installation
1. On the back of the remote,
slide the battery cover off.
2. Remove and discard the
plastic tab under the two
CR2032 Lithium batteries.
When replacing batteries
insert with the + side up.
3. Slide the battery cover back into place.
Note: you will lose any programmed codes after
changing the batteries. The remote defaults to the
factory setting and you will need to reprogram the
remote.
Battery Saver
Your remote automatically turns off if the buttons
are depressed more than 30 seconds. This will save
your batteries should your remote get stuck in a
place where the buttons remain depressed (e.g.,
between the sofa cushions).
S
E
T
Setup
The SETUP button is used to setup the remote. You
can either setup the remote using the code tables
(on separate sheet), or you can search through the
library of codes until you find a code that works for
your product. Please refer to “Programming with
Code Search” page 7 for more information on using
the code search feature to learn how to search
through the library of codes for your products.
NOTE: You can store any kind of code under any
mode (except TV). I.E. you can store a VCR code
under the SAT/CABLE button, or a Cable code
under the DVD/VCR button, etc. However, you can
only store TV codes under the TV button.
32
U
P
Button Functions
Button Functions, cont.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. LAST may be called RECALL, or
DISPLAY may be called INFO. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have LAST ability for
the LAST button to operate this feature.
Red Indicator
Lights when any
POWER Turns
product On or Off.
button is pressed.
TV, DVD/VCR,
SAT/CBL. Selects
product to be
operated.
MUTE Turns off the
TV sound while the
picture remains.
OK Selects menu
items for the device
you are controlling.
NUMBERS
Enter numbers for direct
channel selection. Some
products require ENTER to
be pressed after channel
selection.
R
E
T
N
CC TV Closed
Caption (if your TV
S
E
T
U
P
E
P
E
E
L
S
has this feature) or
DVD Subtitle toggle.
SETUP
For setup.
SLEEP enables the
remote to turn off your
ENTER
For some TV models,
TV after a period of 1 to
99 minutes.
used after direct channel
number entry to immediately change to the
selected channel.
The most commonly used buttons are accessible even
with the remote “closed” as shown below. Just flip it
open to gain access to less frequently used buttons.
SHIFT Press and release to
access buttons labeled in
blue (red indicator stays on).
Press again to exit Shift
mode.
CHANNEL UP/DOWN
Changes the channels.
Also controls MENU
navigation in TV, DVD or
SAT mode for many
brands/models.
INPUT selects the video
input of your TV.
VOLUME UP/DOWN
Changes the volume
level of the product,
normally the TV.
EXIT Exit On-Screen Menus
and/or Return to previous
On-Screen selection.
LAST Returns to the
previously selected channel.
RECORD, PLAY, STOP, REW, FF, PAUSE VCR
control buttons operate your VCR even
when the remote is set to operate the TV.
Also operates DVD Scan -/+. Note the VCR
keys also control DVD when in DVD Mode.
Note: The REC button must be pressed
TWICE to record from your VCR. For some
brands of VCRs, you might need to press
the REC button once, then press it again for
three seconds.
MENU Press and release SHIFT then MENU to display
the menu on the TV. The red LED is on continuously to
indicate the remote is in Menu mode, VOL UP/DOWN
buttons operate as cursor right/left, CH+/- buttons
operate as cursor up/down, and Mute operates as OK.
Press LAST/EXIT button to exit Menu.
DISP Display button shows date and time if your TV or
VCR has that feature.
54
Loading...