GE Pump Motors Brochure

GE Terms and Conditions for Sale of Products and Services

NOTICE: Sale of any Products or Services is expressly conditioned on Buyer's assent to these Terms and Conditions. Any acceptance of Seller’s offer is expressly limited to acceptance of these Terms and Conditions and Seller expressly objects to
any additional or different terms proposed by Buyer. No facility entry form shall modify these Terms and Conditions even if signed by Seller’s representative. Any order to perform work and Seller's performance of work shall constitute Buyer’s assent
to these Terms and Conditions. Unless otherwise specified in the quotation, Seller’s quotation shall expire 30 days from its date and may be modified or withdrawn by Seller before receipt of Buyer’s conforming acceptance.

1. Definitions

"Buyer" means the entity to which Seller is providing Products or Services under the Contract.
"Contract" means either the contract agreement signed by both parties, or the purchase order signed by Buyer and accepted by

Seller in writing, for the sale of Products or Services, together with these Terms and Conditions, Seller’s final quotation, the agreed
scope(s) of work, and Seller’s order ack nowledgement. In the ev ent of any conflict, the Ter ms and Conditions shall take
precedence over other documents included in the Contract.

“Contract Price” means the agreed price stated in the Contract for the sale of Products and Services, including adjustments (if any)

in accordance with the Contract.

“Hazardous Materials” means any toxic or hazardous substance, hazardous material, dangerous or hazardous waste, dangerous
good, radioactive material, petroleum or petroleum-derived products or by-products, or any other chemical, substance, material or
emission, that is regulated, listed or controlled pursuant to any national, state, provincial, or local law, statute, ordinance, directive,
regulation or other legal requirement of the United States (“U.S.”) or the country of the Site.

“Insolvent/Bankrupt” means that a party is insolvent, makes an assignment for the benefit of its creditors, has a receiver or trustee
appointed for it or any of i ts assets, or files or has filed a gainst it a proc eeding under any bankruptc y, insolvency dissolution o r
liquidation laws.

“Products” means the equipment, parts, materials, supplies, software, and other goods Seller has agreed to supply to Buyer under the
Contract.

"Seller" means the entity providing Products or performing Services under the Contract.
“Services” means the services Seller has agreed to perform for Buyer under the Contract.
"Site" means the premises where Products are used or Services are performed, not including Seller’s premises from which it

performs Services.

“Terms and Conditions” means these “Terms and Conditions for Sale of Products and Services”, including any relevant addenda
pursuant to Article 18, together with any modifications or add itional provisions speci fically stated in Seller’s fin al quotation or
specifically agreed upon by Seller in writing.

2. Payment

2.1 Buyer shall pay Seller for the Pro ducts and Services by paying all invoiced am ounts in U.S. dollars , without set-off for a ny
payment from Seller not due under this Contract, within thirty (30) days from the invoice date. If the Contract Price is less than
U.S. Two Hundred Fifty Thousand Dollars ($250,000), Seller shall issue invoices upon shipment of Products and as Services are
performed. If the Contract Price is U.S. Two H undred Fifty Thousand D ollars ($250,000) or more, pr ogress payments shall b e
invoiced starting with twenty-five percen t (25%) of the Contract Price for Products and Servic es upon the earlier o f Contract
signature or issuance of Seller’s order acknowledgement and continuing such that ninety percent (90%) of the Contract Price for
Products is received before the earli est scheduled Product shipm ent and Services are invoiced as pe rformed (“Progress
Payments”). For each calendar month, or fraction thereof, that payment is late, Buyer shall pay a late payment charge computed
at the rate of 1.5% per month on the overdue balance, or the maximum rate permitted by law, whichever is less.

2.2 As and if requested by Seller, Buyer shall at its expense establish and k eep in force paymen t security in the form of an
irrevocable, unconditional, sight letter of credit or bank guarantee allowing for pro-rata payments as Products are shipped and
Services are performed, plus payment of cancellation and termination charges, and all other amounts due from Buyer under the
Contract (“Payment Security ”). The Payment Securit y shall be (a) in a form, and iss ued or confirmed by a ban k acceptable to
Seller, (b) payable at the counters of such acceptable bank or negotiating bank, (c) opened at least sixty (60) days prior to both the
earliest scheduled shipment of Products and commencement of Services, and (d) remain in effect until the latest of ninety (90)
days after the last scheduled Product shipment, completion of all Services and Seller’s receipt of the final payment required under
the Contract. Buyer shall, at its expense, increase the amount(s), extend the validity period(s) and make other appropriate
modifications to any Payment Security within ten (10) days of Seller’s notification that such adjustment is necessary in connection
with Buyer’s obligations under the Contract.

2.3 Seller is not required to commence or continue its performance unless and until any required Payment Security is received,
operative and in effect and all applicable Progress Payments have been received. For each day of delay in receiving Progress
Payments or acceptable Payment Security, Seller shall be entitled to a matching extension of the schedule. If at any time Seller
reasonably determines that Buyer’s financial condition or payment history does not justify continuation of Seller’s performance,
Seller shall be entitled to require full or partial payment in advance or otherwise restructure payments, request additional forms of
Payment Security, suspend its performance or terminate the Contract.

3. Taxes and Duties

Seller shall be responsible for all corporate taxes measured by net income due to performance of or payment for work under this
Contract (“Seller Taxes”). Buyer shall be responsible for all taxes, duties, fees, or other charges of any nature (including, but not
limited to, consumption, gross receipts, import, property, sales, stamp, turnover, use, or value-added taxes, and all items of
withholding, deficiency, penalty, addition to tax, interest, or assessment related thereto, imposed by any governmental authority on
Buyer or Seller or its subcontractors) in relation to the Contract or the performance of or payment for work under the Contract other
than Seller Taxes ("Buyer T axes"). The Contra ct Price does not inclu de the amount of any Buyer Taxes. If Buye r deducts or
withholds Buyer Taxes, Buy er shall pay additional a mounts so that Seller recei ves the full Contract Price without reduction f or
Buyer Taxes. Buyer shall provide to Seller, within one month of payment, official receipts from the applica ble governmental
authority for deducted or withheld taxes.

4. Deliveries; Title Transfer; Risk of Loss; Storage

4.1 For shipments that do not involve export, including shipments from one European Union (“EU”) country to another EU country ,
Seller shall deliver Products to Buyer FCA Seller’s facility or warehouse (Incoterms 2010). For export shipments, Seller shall
deliver Products to Buyer FCA Port of Export (Incoterms 2010). Buyer shall pay all delivery costs and charges or pay Seller’s
standard shipping charges plus up to twenty-five (25%) percent. Partial deliveries are permitted. Seller may deliver Products in
advance of the delivery schedule. Delivery times are approximate and are dependent upon prompt receipt by Seller of all
information necessary to proceed with the work without interruption. If Products delivered do not correspond in quantity, type or
price to those itemized in the shipping invoice or documentation, Buyer shall so notify Seller within ten (10) days after receipt.

4.2 For shipments that do not involve export, title to Products shall pass to Buyer upon delivery in accordance with Section 4.1.
For export shipments from a Seller facility or warehouse outside the U.S., title shall pass to Buyer upon delivery in accordance with
Section 4.1. For shipments from the U.S. to another country, title shall pass to Buyer immediately after each item departs from the
territorial land, seas and overlying airspace of the U.S. The 1982 United Nations Convention of the law of the Sea shall apply to
determine the U.S. territorial seas. For all other shipments, title to Products shall pass to Buyer the earlier of (i) the port of export
immediately after Products have been cleared for export or (ii) immediately after each item departs from the territorial land, seas
and overlying airspace of the sending country. When Buyer arranges the export or intercommunity shipment, Buyer will provide
Seller evidence of exportation or intercommunity shipment acceptable to the relevant tax and custom authorities. Notwithstanding
the foregoing, Seller grants only a license, and does not pass title, for any software provided by Seller under this Contract, and title
to any leased equipment remains with Seller.

4.3 Risk of loss shall pass to Buyer upon delivery pursuant to Section 4.1, except that for export shipments from the U.S., risk of
loss shall transfer to Buyer upon title passage.

4.4 If any Products to be delivered under this Contract or if any Buyer equipment repaired at Seller’s facilities cannot be shipped to
or received by Buyer when ready due to any cause attributable to Buyer or its other contractors, Seller may ship the Products and
equipment to a storage facility, including storage at the place of manufacture or repair, or to an agreed freight forwarder. If Seller
places Products or equipment into storage, the following apply: (i) title and risk of loss immediately pass to Buyer, if they
already passed, and delivery shall be deemed to have occurred; (ii) any amounts otherwise payable to Seller upon
shipment shall be due; (iii) all expenses and charges incurred by Seller related to the storage shall be payable by Buyer
submission of Seller’s invoices; a nd (iv) wh en c o nditi o ns pe rmi t a nd up on pa y me nt o f all amounts due, Seller shall make
and repaired equipment available to Buyer for delivery.

4.5 If repair Services are to be performed on Buyer’s equipment at Seller’s facility, Buyer shall be responsible for, and shall retain
risk of loss of, such equipment at all times, except that Seller shall be responsible for damage to the equipment while at Seller’s
facility to the extent such damage is caused by Seller’s negligence.

5. Warranty

5.1 Seller warrants that Products shall be delivered free from defects in material, workmanship and title and that Services
shall be performed in a competent, diligent manner in accordance with any mutually agreed specifications.

Form ES104 (Standard) (Rev. 4 Jan 2011)

Form ES 104 (Rev. 4)

5.2 The warranty for Products shall expire one (1) year from first use or eighteen (18) months from delivery, whichever occurs first, except
that software is warranted for ninety (90) days from delivery. The warranty for Services shall expire one (1) year after performance of the
Service, except that software-related Services are warranted for ninety (90) days.

5.3 If Products or Services do not meet the above warranties, Buyer shall promptly notify Seller in writing prior to expiration of the warranty
period. Seller shall (i) at its option, repair or replace defective Products and (ii) re-perform defective Services. If despite Seller’s reasonable
efforts, a non-conforming Product cannot be repaired or replaced, or non-conforming Services cannot be re-performed, Seller shall refund or
credit monies paid by Buyer for such non-conforming Products and Services. Warranty repair, replacement or re-performance by Seller shall
not extend or renew the applicable warranty period. Buyer shall obtain Seller’s agreement on the specifications of any tests it plans to conduct
to determine whether a non-conformance exists.

5.4 Buyer shall bear the costs of access for Seller’s remedial warranty efforts (including removal and replacement of systems, structures or
other parts of Buyer’s facility), de-installation, decontamination, re-installation and transportation of defective Products to Seller and back to
Buyer.

5.5 The warranties and remedies are conditioned upon (a) proper storage, installation, use, operation, and maintenance of Products, (b)
Buyer keeping accurate and co mplete records of operati on and maintenan ce during the warranty p eriod and providing Sell er access to
those records, and (c) modification or repair of Products or Services only as authorized by Seller in writing. Failure to meet any such
conditions renders the warranty null and void. Seller is not responsible for normal wear and tear.

5.6 This Article 5 provides the exclusive remedies for all claims based on failure of or defect in Products or Services, regardless of when the
failure or defect arises, and whether a claim, however described, is based on contract, warranty, indemnity, tort/extra-contractual liability
(including negligence), strict liability or otherwise. The warranties provided in this Article 5 are exclusive and are in lieu of all other
warranties, conditions and guarantees whether written, oral, implied or statutory.

WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLIES.

6. Confidentiality

6.1 Seller and Buyer (as to information disclosed, the “Disclosing Party”) may each provide the other party (as to information received, the
“Receiving Party”) with Confidential Information in connection with this Contract. “Confidential Information” means (a) information that is
designated in writing as “confidential” or “proprietary” by Disclosing Party at the time of written disclosure, and (b) information that is orally
designated as “confidential” or “proprietary” by Disclosing Party at the time of oral or visual disclosure and is confirmed to be “confidential” or
“proprietary” in writing within twenty (20) days after the oral or visual disclosure. In addition, prices for Products and Services shall be
considered Seller’s Confidential Information.

6.2 Receiving Party agrees: (i) to use the Confidential Information only in connection with the Contract and use of Products and Services,
(ii) to take reasonable measures to prevent disclosure of the Confidential Information to third parties, and (iii) not to disclose the Confidential
Information to a competitor of Disclosing Party. Notwithstanding these restrictions, (a) Seller may disclose Confidential Information to its
affiliates and subcontractors in connection with performance of the Contract, (b) a Receiving Party may disclose Confidential Information to
its auditors, (c) Buyer may disclose Confidential Information to lenders as necessary for Buyer to secure or retain financing needed to
perform its obligations under the Contract, and (d) a Receiving Party may disclose Confidential Information to any other third party with the
prior written permission of Disclosing Party, and in each case, only so long as the Receiving Party obtains a non-disclosure commitment
from any such subcontractors, auditors, lenders or other permitted third party that prohibits disclosure of the Confidential Information and
provided further that the Receiving Party remains responsibl e for any unauthorized use or disclosure of the Confidential Information.
Receiving Party shall upon request return to Disclosing Party or destroy all copies of Confidential Information except to the extent that a
specific provision of the Contract entitles Receiving Party to retain an item of Confidential Information. Seller may also retain one archive
copy of Buyer’s Confidential Information.

6.3 The obligations under this Article 6 shall no t apply to any portion of the C onfidential Information tha t: (i) is or becomes generally
available to the public other than as a result of disclosure by Receiving Party, its representatives or its affiliates; (ii) is or becomes available
to Receiving Party on a non-confidential basis from a source other than Disclosing Party when the source is not, to the best of Receiving
Party’s knowledge, subject to a confidentiality obligation to Disclosing Party; (iii) is independently developed by Receiving Party, its
representatives or affiliates, without reference to the Confidential Information; (iv) is required to be disclosed by law or valid legal process
provided that the Receiving Party intending to make disclosure in response to such requirements or process shall promptly notify the
Disclosing Party in advance of s uch disclosure and rea sonably cooperate in atte mpts to maintain the c onfidentiality of the Confidential
Information.

6.4 Each Disclosing Party warrants that it has the right to disclose the information that it discloses. Neither Buyer nor Seller shall make any
public announcement about the Contract without prior written approval of the other party. As to any individual item of Confidential
Information, the restrictions und er this Article 6 sh all expire five (5) yea rs after the date of dis closure. Article 6 does not supe rsede any
separate confidentiality or nondisclosure agreement signed by the parties.

7. Intellectual Property

7.1 Seller shall defend and indemnify Buyer against any claim by a non-affiliated third party (a “Claim”) alleging that Products or Services
furnished under this Contract infringe a patent in effect in the U.S., an EU member state or the country of the Site (provided there is a
corresponding patent issued by the U.S. or an EU member state), or any copyright or trademark registered in the country of the Site,
provided that Buyer (a) promptly notifies Seller in writing of the Claim, (b) makes no admission of liability and does not take any position
adverse to Seller, (c) gives Seller sole authority to control defense and settlement of the Claim, and (d) provides Seller with full disclosure
and reasonable assistance as required to defend the Claim.

7.2 Section 7.1 shall not apply and Seller shall have no obligation or liability with respect to any Claim based upon (a) Products or Services
that have been modified, or revised, (b) the combination of any Products or Services with other products or services when such combination
is a basis of the alleged infringement, (c) failure of Buyer to implement any update provided by Seller that would have prevented the Claim,
(d) unauthorized use of Products or Services, or (e) Products or Services made or performed to Buyer’s specifications.

7.3 Should any Product or Service, or any portion thereof, become the subject of a Claim, Seller may at its option (a) procure for Buyer the
right to continue using the Product or Service, or applicable portion thereof, (b) modify or replace it in whole or in part to make it non­infringing, or (c) failing (a) or (b), take b ack infringing Produc ts or Services and re fund the price received by Seller attrib utable to the
infringing Products or Services.

7.4 Article 7 states Seller’s exclusive liability for intellectual property infringement by Products and Services.

7.5 Each party shall retain ownership of all Confidential Information and intellectual property it had prior to the Contract. All new intellectual
property conceived or created by Seller in the performance of this Contract, whether alone or with any contribution from Buyer, shall be
owned exclusively by Seller. Buyer agrees to deliver assignment documentation as necessary to achieve that result.

8. Indemnity

Each of Buyer and Seller (as an “Indemnifying Party”) shall indemnify the other party (as an “Indemnified Party”) from and against claims
brought by a third party, on account of personal injury or damage to the third party’s tangible property, to the extent caused by the
negligence of the Indemnifying Party in connection with this Contract. In the event the injury or damage is caused by joint or concurrent
negligence of Buyer and Seller, the loss or expense shall be borne by each party in proportion to its degree of negligence. For purposes of
Seller’s indemnity obligation, no part of the Products or Site is considered third party property.

9. Insurance

During the term of the Contract, Seller shall maintain for its protection the follow ing insurance coverage: (i) Worke r’s Compensation,
Employer’s Liability and other statutory insurance required by law with respect to work related injuries or disease of employees of Seller in
such form(s) and amount(s) as required by applicable laws; (ii) Automobile Liability insurance with a combined single limit of $2,500,000.00;
(iii) Commercial General Liability or Public Liability insurance for bodily injury and property d amage with a combined single limit of

have not

delivery or

upon

Products

$2,500,000.00. If required in the Contract, Seller shall provide a certificate of insurance reflecting such coverage.

10. Excusable Events

Seller shall not be liable or considered in breach of its obligations under this Contract to the extent that Seller’s performance is delayed or
prevented, directly or indirectly, by any cause beyond its reasonable control, or by armed conflict, acts or threats of terrorism, epidemics,
strikes or other labor disturbances, or acts or omissions of any governmental authority or of the Buyer or Buyer’s contractors or suppliers. If an
excusable event occurs, the schedule for Seller’s performance shall be extended by the amount of time lost by reason of the event plus such
additional time as may be needed to overcome the effect of the event. If acts or omissions of the Buyer or its contractors or suppliers cause
the delay, Seller shall also be entitled to an equitable price adjustment.

11. Termination and Suspension

11.1 Buyer may terminate the Contract (or the portion affected) for cause if Seller (i) becomes Insolvent/Bankrupt, or (ii) commits a material
breach of the Contract which does not otherwise have a specified contractual remedy, provided that: (a) Buyer shall first provide Seller with

NO IMPLIED OR STATUTORY WARRANTY, OR

Page 1 of 2

and

detailed written notice of the breach and of Buyer’s intention to terminate the Contract, and (b) Seller shall have failed, within 30 days after
receipt of the notice, to commence and diligently pursue cure of the breach.

11.2 If Buyer terminates the Contract pursuant to Section 11.1, (i) Seller shall reimburse Buyer the difference between that portion
Contract Price allocable to the terminated scope and the actual amounts reasonably incurred by Buyer to complete that
(ii) Buyer shall pay to Seller (a) the portion of the Contract Price allocable to Produc ts completed, (b) lease fees
amounts for Services performed before the effective date of termination. The amount due for Services shall be
accordance with the milestone sched ule (for completed milest ones) and rates set forth in the Co ntract (for work
not yet achieved and where there is no milestone schedule), as applicable or, where there are no milestones and/or rates in the
Contract, at Seller’s then-current standard time and material rates.

11.3 Seller may suspend or terminate the Contract (or any affected portion thereof) immediately for cause if Buyer (i) becomes
Insolvent/Bankrupt, or (ii) materially breaches the Contract, including, but not limited to, failure or delay in Buyer providing Payment
Security, making any payment when due, or fulfilling any payment conditions.

11.4 If the Contract (or any portion thereof) is terminated for any reason other than Seller’s default under Section 11.1, Buyer shall
pay Seller for all Products completed, lease fees incurred and Services performed before the effective date of termination, plus
expenses reasonably incurred by Seller in connection with the termination. The amount due for Services shall be determined in
accordance with the milestone schedule (for completed milestones) and rates set forth in the Contract (for work toward milestones
not yet achieved and where there is no milestone schedule), as applicable or, where there are no milestones and/or rates in the
Contract, at Seller’s then-current standard time and material rates. In addition, Buyer shall pay Seller a cancellation charge equal
to 80% of the Contract Price applicable to uncompleted made-to-order Products and 15% of the Contract Price applicable to all
other uncompleted Products.

11.5 Either Buyer or Seller may terminate the Contract (or the portion affected) upon twenty (20) days advance notice if there is an
excusable event (as described in Article 10) lasting longer than one hundred and twenty (120) days. In such case, Buyer shall pay to
Seller amounts payable under Section 11.4, excluding the cancellation charge for uncompleted Products.

11.6 Buyer shall pay all reasonable expenses incurred by Seller in connection with a suspension, including, but not limited to,
expenses for repossession, fee collection, demobilization/remobilization, and costs of storage during suspension. The schedule for Seller’s
obligations shall be extended for a period of time reasonably necessary to overcome the effects of any suspension.

12. Compliance with Laws, Codes and Standards

12.1 Seller shall comply with laws applicable to the manufacture of Products and its performance of Services. Buyer shall comply with
laws applicable to the application, operation, use and disposal of the Products and Services.

12.2 Seller’s obligations are conditio ned upon Buyer’s compliance with all U.S. a nd other applicable trade control laws and
regulations. Buyer shall not trans-ship, re-export, divert or direct Products other than in and to the ultimate country of destination
declared by Buyer and specified as the country of ultimate destination on Seller’s invoice.

12.3 Notwithstanding any other provision, Buyer shall timely obtain, effectuate and maintain in force any required permit, license,
exemption, filing, registration and other authorization, including, but not limited to, building and environmental permits, import
licenses, environmental impact assessments, and foreign exchange authorizations, required for the lawful performance of Services
Site or fulfillment of Buyer’s obligations, except that Seller shall o btain any license o r registration nece ssary for Seller to
conduct business and visas or work permits, if any, necessary for Seller’s personnel. Buyer shall provide reasonable assistance to
Seller in obtaining such visas and work permits.

13. Environmental, Health and Safety Matters

13.1 Buyer shall maintain safe working conditions at the Site, including, without limitation, implementing appropriate procedures
regarding Hazardous Materials, confined space entry, and energization and de-energization of power systems (electrical,
mechanical and hydraulic) using safe and effective lock-out/tag-out (“LOTO”) procedures including physical LOTO or a mutually agreed
upon alternative method.

13.2 Buyer shall timely advise Seller in writing of all applicable Site-specific health, safety, security and environmental
requirements and procedures. Without limiting Buyer’s responsibilities under Article 13, Seller has the right but not the obligation
to, from time to time, review and inspect applicable health, safety, security and environmental documentation, procedures and
conditions at the Site.

13.3 If, in Seller’s reasonable opinion, the health, safety, or s ecurity of personnel or the Site is , or is apt to be, imperiled by
security risks, terrorist acts or threats, the presence of or threat of exposure to Hazardous Materials, or unsafe working conditions,
Seller may, in addition to other rights or remedies available to it, evacuate some or all of its personnel from Site, suspend
performance of all or any part of the Contract, and/or remotely perform or supervise work. Any such occurrence shall be
considered an excusable event. Buyer shall reasonably assist in any such evacuation.

13.4 Operation of Buyer’s equipment is the responsibility of Buyer. Buyer shall not require or permit Seller’s personnel to operate
Buyer’s equipment at Site.

13.5 Buyer will make its Site medical facilities and resources available to Seller personnel who need medical attention.

13.6. Seller has no responsibility or liability for the pre-existing condition of Buyer’s equipment or the Site. Prior to Seller starting any
work at Site, Buyer will provide documentation that identifies the presence and condition of any Hazardous Materials existing in or
about Buyer’s equipment or the Site that Seller may encounter while performing under this Contract. Buyer shall disclose to Seller
industrial hygiene and environmental monitoring data regarding conditions that may affect Seller’s work or personnel at the Site. Buyer
shall keep Seller informed of changes in any such conditions.

13.7 Seller shall notify Buyer if Seller becomes aware of: (i) con ditions at the Site differing materi ally from those disclosed by
Buyer, or (ii) previously unknown physical conditions at Site differing materially from those ordinarily encountered and generally
recognized as inherent in work of the character provided for in the Contract. If any such conditions cause an increase in Seller's
cost of, or the time required for, performance of any part of the work under the Contract, an equitable adjustment in price and
schedule shall be made.

13.8 If Seller encounters Hazardous Materials in Buyer’s equipment or at the Site that require special handling or disposal, Seller
not obligated to continue work affec ted by the hazardous conditions. In such an event, Buyer shall eliminate the hazardous
conditions in accordance with applicable laws and regulations so that Seller’s work under the Contract may safely proceed, and Seller
shall be entitled to an equitable adjustment of the price and schedule to compensate for any increase in Seller’s cost of, or time
required for, performance of any part of the work. Buyer shall properly store, transport and dispose of all Hazardous Materials introduced,
produced or generated in the course of Seller’s work at the Site.

13.9 Buyer shall indemnify Seller for any and all claims, damages, losses, and expenses arising out of or relating to any
Hazardous Materials which are or were (i) present in or about Buyer’s equipment or the Site prior to the commencement of Seller’s work,
(ii) improperly handled or disposed of by Buyer or Buyer’s employees, agents, contractors or subcontractors, or (iii) brought, generated,
produced or released on Site by parties other than Seller.

14. Changes

14.1 Each party may at any time propose changes in the schedule or scope of Products or Services. Seller is not obligated to proceed
with any change until both parties agree upon such change in writing. The written change documentation will describe the changes in
scope and schedule, and the resulting changes in price and other provisions, as agreed.

14.2 The scope, Contract Price, schedule, and other provisions will be equitably adjusted to reflect additional costs or obligations
incurred by Seller resulting from a change, after Seller’s proposal date, in Buyer’s Site-specific requirements or procedures, or in
industry specifications, codes, standards, applicable laws or regulations. However, no adjustment will be made on account of a
general change in Seller’s manufacturing or repair facilities resulting from a change in laws or regulations applicable to such
facilities. Unless otherwise agreed by the parties, pricing for additional work arising from such changes shall be at Seller’s time
and material rates.

14.3 It shall be acceptable and not considered a change if Seller delivers a Product that bears a different, superseding or new part or
version number compared to the part or version number listed in the Contract.

15. Limitations of Liability

15.1 The total liability of Seller for all claims of a ny kind arising from or related to the form ation, performance or breac h of this
Contract, or any Products or Se rvices, shall not exceed the (i) Co ntract Price, or (ii) if Buyer places m ultiple order(s) under the
Contract, the price of each particul ar order for all claims arising from or relate d to that order and ten thousand US dollars (US
$10,000) for all claims not part of any particular order.

15.2 Seller shall not be liable for loss of profit or revenues, loss of use of equipment or systems, interruption of business, cost of
replacement power, cost of capital, downtime costs, increased operating costs, any special, consequential, incidental, indirect, or
punitive damages, or claims of Buyer’s customers for any of the foregoing types of damages.

15.3 All Seller liability shall end upon expiration of the applicable warranty period, provided that Buyer may continue to enforce a
claim for which it has given no tice prior to that date by com mencing an action or arbi tration, as applicable under t his Contract,
before expiration of any sta tute of limitations or other leg al time limitation but in no e vent later than one year aft er expiration of
such warranty period.

15.4 Seller shall not be liable for advice or assistance that is not required for the work scope under this Contract.

Form ES104 (Standard) (Rev. 4 Jan 2011)

of the

scope, and

incurred, and (c)

determined in

toward milestones

at the

generally

15.5 If Buyer is supplying Products or Services to a third party, or using Products or Services at a facility owned by a third party, Buyer
shall either (i) indemnify and defend Seller from and against any and all claims by, and liability to, any such third party in excess of the
limitations set forth in this Article 15, or (ii) require that the third party agree, for the benefit of and enforceable by Seller, to be bound by all
the limitations included in this Article 15.

15.6 For purposes of this Article 15, the term “Seller” means Seller, its affiliates, subcontractors and suppliers of any tier, and their
respective employees. The limitations in this Article 15 shall apply regardless of whether a claim is based in contract, warranty,
indemnity, tort/extra-contractual liability (including negligence), strict liability or otherwise, and shall prevail over any conflicting terms,
except to the extent that such terms further restrict Seller’s liability.

16. Governing Law and Dispute Resolution

16.1 This Contract shall be governed by and construed in accordance with the laws of (i) the State of New York if Buyer’s place of
business is in the U.S. or (ii) England if the Buyer’s place of business is outside the U.S., in either case without giving effect to any choice
of law rules that would cause the application of laws of any other jurisdiction (the “Governing Law”). If the Contract includes the sale of
Products and the Buyer is outside the Seller’s country, the United Nations Convention on Contracts for the International Sale of Goods
shall apply.

16.2 All disputes arising in connection with this Contract, including any question regarding its existence or validity, shall be resolved in
accordance with this Article 16. If a dispute is not resolved by negotiations, either party may, by giving written notice, refer the dispute to a
meeting of appropriate higher management, to be held within twenty (20) business days after the giving of notice. If the dispute is not
resolved within thirty (30) business d ays after the giving of notice , or such later date as may be mutually agreed, either part y may
commence arbitration or court proceedings, depending upon the location of the Buyer, in accordance with the following:

(a) if the Buyer’s pertinent place of business is in the U.S, legal action shall be commenced in federal court with jurisdiction applicable
to, or state court located in, either Cobb County, Georgia or the location of Buyer’s principal place of business; or (b) if the Buyer’s
pertinent place of business is outside the U.S., the dispute shall be submitted to and finally resolved by arbitration under the Rules of
Arbitration of the International Chamber of Commerce (“ICC”). The number of arbitrators shall be one, selected in accordance with the
ICC rules, unless the amount in dispute exceeds the equivalent of U.S. $5,000,000, in which event it shall be three. When three
arbitrators are involved, each party shall appoint one arbitrator, and those two shall appoint the third within thirty (30) days, who shall be
the Chairman. The seat, or legal place, of arbi tration, shall be London , England. The arbitra tion shall be conducted in English. In
reaching their decision, the arbitrato rs shall give full force an d effect to the intent o f the parties as expr essed in the Cont ract, and if a
solution is not found in the Contract, shall apply the governing law of the Contract. The decision of the arbitrator(s) shall be final and
binding upon both parties, and neither party shall seek recourse to a law court or other authority to appeal for revisions of the decision.

16.3 Notwithstanding the foregoing, each party shall have the right at any time, at its option and where legally available, to immediately
commence an action or proceeding in a court of competent jurisdiction, subject to the terms of this Contract, to seek a restraining order,
injunction, or similar order to enfo rce the confiden tiality provisions set f orth in Article 6 and/ or the nuclear us e restrictions s et forth in
Section 19.1, or to seek interim or conservatory measures. Monetary damages shall only be available in accordance with Section 16.2.

17. Inspection and Factory Tests

Seller will apply its normal quality control procedures in manufacturing Products. Seller shall attempt to accommodate requests by Buyer
to witness Seller’s factory tests of Products, subject to appropriate access restrictions, if such witnessing can be arranged without
delaying the work.

18. Software, Leased Equipment, Remote Diagnostic Services, PCB Services

If Seller provides any software to Buyer, the Software License Addendum shall apply. If Seller leases any of Seller’s equipment or
provides related Services to Buyer, including placing Seller’s equipment at Buyer’s site to provide remote Services, the Lease Addendum
shall apply. If Seller provides re mote diagnostic se rvices to Buyer, the Remote Diagn ostic Services Ad dendum shall ap ply. If Seller
provides PCB Services to Buyer, the PCB Services Addendum shall apply. If there is any conflict between these “Terms and Conditions
for the Sale of Products and Services, Form ES 104” and the terms of any addendum incorporated pursuant to this Article 18, the terms of
the addendum shall take precedence with respect to the applicable scope.

19. General Clauses

19.1 Products and Services sold by Seller are not intended for use in connection with any nuclear facility or activity, and Buyer warrants
that it shall not use or permit others to use Products or Services for such purposes, without the advance written consent of Seller. If, in
breach of this, any such use occurs, Seller (and its parent, affiliates, suppliers and subcontractors) disclaims all liability for any nuclear or
other damage, injury or contamination, and, in addition to any other rights of Seller, Buyer shall indemnify and hold Seller (and its parent,
affiliates, suppliers and subcontractors) harmless against all such liability. Consent of Seller to any such use, if any, will be conditioned
upon additional terms and conditions that Seller determines to be acceptable for protection against nuclear liability.

19.2 Seller may assign or novate its rights and obligations under the Contract, in whole or in part, to any of its affiliates or may assign any
of its accounts receivable under this Contract to any party without Buyer’s consent. Buyer agrees to execute any documents that may be
necessary to complete Seller’s assignment or novation. Seller may subcontract portions of the work, so long as Seller remains
responsible for it. The delegation or assignment by Buyer of any or all of its rights or obligations under the Contract without Seller’s prior
written consent (which consent shall not be unreasonably withheld) shall be void.

19.3 Buyer shall notify Seller immediately upon any change in ownership of more than fifty percent (50%) of Buyer's voting rights or of
any controlling interest in Buyer. If Buyer fails to do so or Seller objects to the change, Seller may (a) terminate the Contract, (b) require
Buyer to provide adequate assurance of performance (including but not limited to payment), and/or (c) put in place special controls
regarding Seller’s Confidential Information.

19.4 If any Contract provision is found to be void or unenforceable, the remainder of the Contract shall not be affected. The parties will
endeavor to replace any such void or unenforceable provision with a new provision that achieves substantially the same practical and
economic effect and is valid and enforceable.

19.5 The following Articles shall survive termination or cancellation of the Contract: 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 16, 18, 19 and

20.

is

19.6 The Contract represents the entire agreement between the parties. No oral or written representation or warranty not contained in
this Contract shall be binding on either party. Buyer’s and Seller’s rights, remedies and obligations arising from or related to Products
Services sold under this Contract are limited to the rights, remedies and obligations stated in this Contract. No modification,
amendment, rescission or waiver shall be binding on either party unless agreed in writing.

19.7 Except as provided in Article 15 (Limitations of Liability) and in Section 19.1 (no nuclear use), this Contract is only for the benefit of
the parties, and no third party shall have a right to enforce any provision of this Contract, whether under the English Contracts (Rights of
Third Parties) Act of 1999 or otherwise.

19.8 This Contract may be signed in multiple counterparts that together shall constitute one agreement.

20. US Government Contracts

20.1 This Article 20 applies only if the Contract is for the direct or indirect sale to any agency of the U.S. government and/or is funded in
whole or in part by any agency of the U.S. government.

20.2 Buyer agrees that all Products and Services provided by Seller meet the definition of “com mercial-off-the-shelf” (“COTS”) or
“commercial item” as those terms are defi ned in Federal Acquisition Re gulation (“FAR”) 2.101 . To the extent the Buy American Act,
Trade Agreements Act, or other domestic preference requirements are applicable to this Contract, the country of origin of Products is
unknown unless otherwise specifically stated by Seller in this Contract. Buyer agrees any Services offered by Seller are exempt from the
Service Contract Act of 1965 (FAR 52.222-41). Buyer represents and agrees that this Contract is not funded in whole or in part by
American Recovery Reinvestment Act funds unless otherwise specifically stated in the Contract. The version of any applicable FAR
clause listed in this Article 20 shall be the one in effect on the effective date of this Contract.

20.3 If Buyer is an agency of the U.S. Government, then as permitted by FAR 12.302, Buyer agrees that all paragraphs of FAR 52.212-4
(except those listed in 12.302(b)) are replaced with these Terms and Conditions. Buyer furth er agrees the subparagraphs of FAR

52.212-5 apply only to the extent applicable for sale of COTS and/or commercial items and as appropriate for the Contract Price.

20.4 If Buyer is procuring the Products or S ervices as a contr actor, or subco ntractor at any ti er, on behalf of any agency of the U.S.
Government, then Buyer agrees that FAR 52.212-5(e) or 52.244-6 (whichever is applicable) applies only to the extent applicable for sale
of COTS and/or commercial items and as appropriate for the Contract Price.

Page 2 of 2

and