GE PTS700RSN Specification

PTS700RSN

Cutout width

28-1/2" MIN.

28-5/8" MAX.

A

C

Cutout height

27-1/4" MIN.
27-5/16" MAX.

Recommended
cutout location
from the floor

32-1/2"

30''

JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS

Cutout width

28-1/2" MIN.

28-5/8" MAX.

B

A

C

Cutout height

27-1/4" MIN.
27-5/16" MAX.

Recommended
cutout location
from the floor

32-1/2"

30''

9-1/2" MAX.

Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"

Oven

D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"

Cutout width

28-1/2" MIN.

28-5/8" MAX.

B

A

C

Cutout height

27-1/4" MIN.
27-5/16" MAX.

Recommended
cutout location
from the floor

32-1/2"

30''

F

E

Conduit
48"

Cutout depth

23-1/2" MIN

Door Swing Depth

31-1/8" (77.8 cm) MIN.

22" to

bottom of
junction box

Junction box
may be located in
adjacent cabinet

9-1/2" MAX.

D

NOTE: Allow

1/4" (0.64 cm)

clearances from
side edges of
oven door

JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS

GE Profile™ 30" Smart Built-In Convection Single Wall Oven
with Right-Hand Side-Swing Doors

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

NOTE: Wall coverings, countertops and

cabinets surrounding the wall oven must
be able to withstand a temperature of up to
200°F (94°C).

NOTE: If the cabinet in which the wall oven
is installed does not have a solid bottom, two
braces or runners must be installed to support
the weight of the oven. The runners and
braces must support up to 400 lbs (181 kg).

NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.

ATTE N T I ON IN S TA LLER : Electric wall
ovens are NOT approved for installation with
a plug and receptacle. They must be hard
wired into an approved junction box.

IMPORTANT: Before installing, consult
installation instructions packed with product
for current dimensional data.

KW RATING

24 0V 4.2

208V 3.2

BREAKER SIZE

24 0V 20 Amps

208V 20 Amps

For answers to your GE Profile™ or GE Appliances product
questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.

Suitable

bracing

to support

runners

E

(must support 220 lbs.)

F

Door Swing Depth

31-1/8" (77.8 cm) MIN.

2 x 4 or

C

L

equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.

Conduit

48"

D

ADA

COMPLIANT

Cutout width

28-1/2" MIN.

28-5/8" MAX.

Cutout depth

23-1/2" MIN

Junction box

NOTE: Allow

1/4" (0.64 cm)

clearances from
side edges of
oven door

may be located in
adjacent cabinet

22" to
bottom of
junction box

B

30''

A

C

Cutout height

27-1/4" MIN.
27-5/16" MAX.

Recommended
cutout location
from the floor

32-1/2"

Dimension and installation information are shown in inches.

Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"

Oven

D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"

Listed by
Underwriters
Laboratories

Specification Revised 7/20

PTS700RSN

Gas or Electric Cooktops May Be Installed Over This Oven.
See Cooktop Installation Instructions for Cutout Size.
See Label on Top of Oven for Approved Models.

240V/208V

Junction Box

Location

(junction box may

be in adjacent

cabinet)

Gas or Electric Connections for Gas
Cooktop Must be Located in an Adjacent
Accessible Location to the Right

Top and/or Side Fillers
May Be Necessary if
Unit is Positioned
Between Existing
Cabinets. Be Sure
They Are Attached
Securely, Since They
Will Anchor the Oven
in the Cabinet.

22" (55.9 cm) min.
Above Support
Platform

36" (91.4 cm)
Countertop
Height

Must Match
Toekick Height

24" (61 cm)

4" (10.2 cm)
Toekick

25" (63.5 cm)

MUST SUPPORT 220 lbs. (99 kg) FOR SINGLE OVENS

3/4" (1.9 cm)

Support Platform

Required

Side-bySide Installations

Install two ovens in separate cutouts.

Location

cabinet)

Gas or Electric Connections for Gas
Cooktop Must be Located in an Adjacent
Accessible Location to the Right

22" (55.9 cm) min.
Above Support
Platform

36" (91.4 cm)
Countertop
Height

Must Match
Toekick Height

24" (61 cm)

4" (10.2 cm)
Toekick

Gas or Electric Cooktops May Be Installed Over This Oven.
See Cooktop Installation Instructions for Cutout Size.
See Label on Top of Oven for Approved Models.

240V/208V

Junction Box

Location

(junction box may

be in adjacent

cabinet)

Gas or Electric Connections for Gas
Cooktop Must be Located in an Adjacent
Accessible Location to the Right

Top and/or Side Fillers
May Be Necessary if
Unit is Positioned
Between Existing
Cabinets. Be Sure
They Are Attached
Securely, Since They
Will Anchor the Oven
in the Cabinet.

2 1/2" min. (6.4 cm)

31 1/4" min.

(79.4 cm)

Cooktop

Wall Oven

SIDE OVEN

IMPORTANT:

Maintain a minimum
distance of 31 1/4"
from the top surface
of the countertop to
the wall oven
platform to ensure
that the cooktop and
wall oven do not
interfere with each
other (see picture).

22" (55.9 cm) min.
Above Support
Platform

36" (91.4 cm)
Countertop
Height

Must Match
Toekick Height

24" (61 cm)

4" (10.2 cm)
Toekick

25" (63.5 cm)

MUST SUPPORT 220 lbs. (99 kg) FOR SINGLE OVENS

3/4" (1.9 cm)

Support Platform

Required

Side-bySide Installations

Install two ovens in separate cutouts.

GE Profile™ 30" Smart Built-In Convection Single Wall Oven
with Right-Hand Side-Swing Doors

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

NOTE: 30" Single electric wall ovens are approved

for installation below a countertop, and below
certain gas and electric cooktops. Refer to the
Approved Combinations Matrix available at
geappliances.com for specific information.

NOTE: 30" Single electric wall ovens are approved
for installation above 27" and 30" warming drawers.

ATTENTION INSTALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.

IMPORTANT: Before installing, consult
installation instructions packed with ALL products
for current dimensional and combination data.

(TWO OVENS IN SEPARATE CUTOUTS)

NOTE: One cooktop may be centered over either
oven in the side-by-side installation.

SIDE-BY-SIDE INSTALLATION

Center Line Center Line

30.5" (77.5 cm) 30" models

27" (68.58 cm) 27" models

Cooktop

Cutout – observe
all dimensions and
requirements

For answers to your GE Profile™ or GE Appliances product questions, visit our website
at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Cutout – observe
all dimensions and
requirements

2" (5.1 cm) min.

UNDERCOUNTER INSTALLATION

INSTALLATION BELOW A COOKTOP

2 1/2" min. (6.4 cm)

IMPORTANT:

Maintain a minimum
distance of 31 1/4"
from the top surface
of the countertop to
the wall oven
platform to ensure
that the cooktop and
wall oven do not
interfere with each
other (see picture).

31 1/4" min.

(79.4 cm)

Cooktop

Wall Oven

SIDE OVEN

Specification Revised 7/20