GE PTS7000BN, PTS7000FN, PTS7000SN Specification

PTS7000BN/FN/SN

GE Profile™ 30" Smart Built-In Convection Single Wall Oven with Air Fry and Precision Cooking

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Single wall ovens are NOT approved for				Cutout width
NOTE: Single wall ovens are NOT approved for				28-1/2" MIN.
stacking above or below another single wall oven.				28-1/2" MIN.
stacking above or below another single wall oven.				28-5/8" MAX.
			9-1/2" MAX.	28-5/8" MAX.
NOTE: Wall coverings, countertops and cabinets			9-1/2" MAX.
surrounding the wall oven must be able to withstand a			Cutout depth
temperature of up to 200°F (94°C).			Cutout depth	A
NOTE: If the cabinet in which the wall oven is			23-1/2" MIN	A
NOTE: If the cabinet in which the wall oven is	F		Junction box	B
installed does not have a solid bottom, two braces or	F		location	B
installed does not have a solid bottom, two braces or			location
runners must be installed to support the weight of the			22" to	C
oven. The runners and braces must support up to 220			22" to
lbs (99 kg).			bottom of
lbs (99 kg).	E	Conduit	junction box
NOTE: Door handle protrudes 3" from door face.	E	48"
NOTE: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90° walls
should be placed to avoid interference with the handle.		D

ATTENTION INSTALLER: Electric wall ovens


are NOT approved for installation with a plug and
receptacle. They must be hard wired into an approved
junction box.	23" min. door opening

			30''
IMPORTANT: Before installing, consult installation	allowance for drop-down doors,		30''
	allowance for drop-down doors,
	and 30" min. allowance for
instructions packed with product for current	side-swing doors.	Dimension and installation information are shown in inches.
instructions packed with product for current
dimensional data.
dimensional data.

Cutout height

27-1/4" MIN.

27-5/16" MAX.

Recommended cutout location from the floor

32-1/2"

PTS7000

KW RATING

240V 4.5

208V 3.4

BREAKER SIZE

240V 20 Amps

208V 20 Amps

		2 x 4 or
	C	equivalent runners
	L	level with bottom of cutout
		and flush with sides of cutout
		or solid bottom floor.
Suitable
bracing	(must support 220 lbs.)
to support	(must support 220 lbs.)
runners

Cabinet	30"
A - Overlap of oven at top of cutout	1"
B - Overlap of oven other side of edge of cutout	3/4"
C - Overlap of oven at bottom of cutout	1-1/4"
Oven
D - Install depth	23-1/2"
E - Overall height with trim	28-5/8"
F - Overall width	29-3/4"

ADA	Listed by
	Listed by
	Underwriters
COMPLIANT	Laboratories

For answers to your GE Profile™ or GE Appliances product
questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.	Specification Revised 10/20

PTS7000BN/FN/SN

GE Profile™ 30" Smart Built-In Convection Single Wall Oven with Air Fry and Precision Cooking

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

UNDERCOUNTER INSTALLATION

NOTE: 30" Single electric wall ovens are approved

for installation below a countertop, and below

Gas or Electric Cooktops May Be Installed Over This Oven.

240V/208V

certain gas and electric cooktops. Refer to the

See Cooktop Installation Instructions for Cutout Size.

Junction Box

See Label on Top of Oven for Approved Models.

Location

Approved Combinations Matrix available at

(junction box may

be in adjacent

geappliances.com for specific information.

cabinet)

25"

(63.5 cm)

Gas or Electric Connections for Gas

NOTE: 30" Single electric wall ovens are approved

Cooktop Must be Located in an Adjacent

Accessible Location to the Right

for installation above 27" and 30" warming drawers.

ATTENTION INSTALLER: Electric wall ovens

Top and/or Side Fillers

are NOT approved for installation with a plug

May Be Necessary if

and receptacle. They must be hard wired into an

Unit is Positioned

Between Existing

approved junction box.

Cabinets. Be Sure

They Are Attached

Securely, Since They

22"

(55.9 cm) min.

36"

(91.4 cm)

IMPORTANT: Before installing, consult

Will Anchor the Oven

in the Cabinet.

Above Support

Countertop

installation instructions packed with ALL products

3/4" (1.9 cm)

Platform

Height

Must Match

for current dimensional and combination data.

Support Platform

Required

Toekick Height

24" (61 cm)

MUST SUPPORT 220 lbs. (99 kg) FOR SINGLE OVENS

SIDE-BY-SIDE INSTALLATION (TWO OVENS IN SEPARATE CUTOUTS)

Side-bySide Installations Install two ovens in separate cutouts.

4" (10.2 cm) Toekick

Center Line

30.5" (77.5 cm) 30" models

27" (68.58 cm) 27" models

INSTALLATION BELOW A COOKTOP

Cooktop
Cutout – observe		Cutout – observe
all dimensions and		all dimensions and
requirements		requirements

2" (5.1 cm) min.

NOTE: One cooktop may be centered over either oven in the side-by-side installation.

IMPORTANT:

Maintain a minimum distance of 31 1/4" from the top surface of the countertop to the wall oven platform to ensure that the cooktop and wall oven do not interfere with each other (see picture).

2 1/2" min. (6.4 cm)

Cooktop

31 1/4" min.

(79.4 cm)

Wall Oven

	For answers to your GE Profile™ or GE Appliances product	SIDE OVEN
	questions, visit our website at geappliances.com or call
	questions, visit our website at geappliances.com or call
	GE Answer Center® Service, 800.626.2000.	Specification Revised 10/20

+ 1 hidden pages