GE PTC22MFMALBB, PTC22MFMALCC, PTC22MFMALWW, PTC22MFMARBB, PTC22MFMARCC Installation Guide

Installation Instructions

WR17X10424 - Bucket & Cover Assembly Display

When a recent change was made to Bucket & Cover Assembly Display WR17X10424 to use Cover

162D1305P002 instead of specified Cover 187D1768P001, interference with the Freezer Door
closure was inadvertently introduced. To eliminate that interference, the Cover provided with the new
Bucket Assembly must be removed, discarded and replaced by the Cover on the assembly being
replaced.

The Cover is easily removed from the assembly by removing four mounting screws. Those screw
locations are the same on both Covers and shown in the photos below.

/

Two screws are located inside }

Two screws are located onthe bottom of the Cover.

When the Cover removal and replacement has been completed, the Bucket and Cover Assembly

Display can be installed in the Freezer compartment.

the Bucket, behind the Cover.

t

Cover to be removed and discarded

!62D1305P002

t Original Cover 187D 1768P001