GE PSFA Data Sheet

GE

Lighting

Sports & Stadium Lighting

Powr-Spot™ (PSFA)

imagination at work

Product Features

GE Sports Flood Lighting is the premium lighting solution for professional arena applications. Combining state-of-the­art lamp, optical and ballast technology, packaged together for unmatched light output and efficiency, with excellent
visibility for player, spectators and television broadcasting.

Applications

• Recreational and competition sports fields at all levels

• General floodlighting where revolving reflectors are
needed

Housing

• Die-cast aluminum ballast housing with polyester
powder gray paint finish inside and out

Finish

• Polyester powder gray paint finish

Ratings

/

• 1598 Listed Suitable For Wet Locations

Reflectors

• Enclosed, gasketed, filtered optical with ALGLAS™
finish on aluminum reflector and
tempered glass closure

Unique Features

• Thermal separation of ballast from socket and lamp

• Removable cover for access to ballast and wiring
compartment

• No-weep-hole condensate drain when aimed down

• Built-in cable and strain relief bushing

• Heavy gauge steel trunnion with aiming reset stop

• Mogul base socket – E39 standard with lamp stabilizer
1000 & 1500 watt

• Corrosion-resistant hardware

• Position oriented socket available for “minimum” tilt
factor lamp – contact factory

• Field convertible glare reduction available. See
Accessories.

• Remote ballasted system available – contact factory

Ordering Number Logic

Powr-Spot™ (PSFA)

P S F A
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _

OPTICAL

REFLECTOR

See Dimensions
HD0 = Heavy Duty

20-in.
(508mm)
Diameter

GP0 = General

Purpose 20-in.
(508mm)
Diameter

HD2 = Heavy Duty

22-in.
(559mm)
Diameter

GP2 = General

Purpose 22-in.
(559mm)
Diameter

PROD. ID

PSFA = Standard Powr-Spot

Floodlight all opticals.

WAT TAG E

75 = 750
01 = 1000
51 = 1500

LIGHT

SOURCE

E = Energy Act

Compliant
Pulse MH
(EPMH)

S = HPS
M = MH

Standard: Lamp
not included.

VOLTAGE

60Hz
0 = 120/208/ 240/

277 Multivolt

1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
T = 220

50Hz
6 = 220

BALLAST

TYPE

See Ballast and
Photometric
Selection Table

A = Autoreg

TRUNNION

TYPE

1 = Straight
2 = Angled
3 = Long

(for SportsStar™)
(13.750”)

4 = Straight Trunnion

w/CAA-001

NEMA TYPE

BEAM SPREAD

HORIZ X VERT

Select NEMA
Type from Ballast
and Photometric
Selection Table.
Example:

3 = 3 x 3

Ballast and Photometric Selection Table

All light sources are clear unless otherwise indicated. All Ballasts are Autoreg.

Reflectors
Listed by Diameter, Photometric Curve Number 35-xxxxx, and Actual Beam Angle in degrees.

Type All
Product ID Wattage

400 HPS A 175663 (12X12) 175664 (20X20) 177613 (38X34) 179262 (51X47) 177463 (61X57) N/A
750 HPS A**,H N/A 179186 N/A 178177 (67X64) 178178 (77X76) 178179 (110X107)
400 C/F C/F C/F C/F C/F C/F C/F N/A
1000 MH A N/A 452777 (23X23)* 452778 (40X42) 452779 (55X57) 452782 (85X79) 452781 (109X111)
1500*** MH A N/A 452746 (23X22)* 452739 (44X44) 452740 (60X59) 452741 (70X68) 452744 (107X107)

NOTE: N/A = Not Available C/F = Contact factory
*Premium high performance 22-in. (559mm) NEMA Type 2 optical available – contact factory for photometric data.

**Multivolt not available

***347 volts not available in multivolt.
For facade and indirect lighting applications with 1500 watt or greater, GE recommends adding wire guard accessory WG-PSFO or WG-PSFHD2.
For facade or applications with aiming fixture above horizontal, contact factory.

Ballast

Voltages***

NEMA Type Beam Spread (Horizontal X Vertical)
22-in. (559mm) Diameter 20-in. (508mm) Diameter

1 - 1x1 2 = 2x2 3 = 3x3 4 = 4x4 5 = 5x5 6 =6x6

OPTIONS

F = Fusing (Not available with multivolt)
P = Pre-wired with 6-ft (2M) #14/3

Optical/Lamp Holder Selection Table

Does not include reflector

Wattage Source Number Optical and Ballast

400 HPS PSFC40S 10 ft (3 M)
750 HPS PSFC75S 10 ft (3 M)
400 MH PSFC40M NOTE*
1000/1500/ MH PSFC95M NOTE*

NOTE: * No limitation except voltage drop in the cable

Light Ordering Maximum Separation

must not exceed five volts.

Optical Component Logic

Optical MH
Component 1500W 1000W 400W 1000W 400W 750W Table Using Beam
Logic 51 01 40 01 40 75 Spread And Lamp Type

A 2 2 1 N/A N/A 2 HD2 or GP2
B 3 3 3* N/A 3 3 GPO or HDO

C 4 4 3 N/A 4 4
D 5 5 5 N/A 5 5
E 6 6 6 5 6 6

NOTE: *Not standard. Better equivalent distributions exist. N/A = Not Available

HPS Choose A, B, C, D, E, From

Heavy
Duty

General Purpose

Product Dimensions

Powr-Spot™ (PSFA)

Solid line – heavy duty optical
Dotted line – general purpose optical

Optical A DIA B C D

22-in. 23.000 7.969 12.625 23.050
559 mm 584 203 321 586
20-in. 20.700 7.969 12.531 22.250
508 mm 526 203 318 565

Angled Trunnion

Optical A DIA B C D

22-in. 23.000 12.438 17.875 34.312
559mm 584 316 454 872
20-in. 20.700 12.575 18.000 31.312
508mm 526 319 457 795

Straight Trunnion Remote Socket Holder

Optical A DIA B C Radius D Min.

22-in. 23.000 13.000 9.000 26.500
559mm 584 330 229 673
20-in. 21.000 13.000 9.000 26.000
508mm 533 330 229 660

Order Reflector Separate

•

Approximate Net Weight

•

Effective Projected Area

DATA

*When aimed 30°/22-in. down

: 55-65 lbs (25-29 kgs)
: 2.7* sq ft max (.24* sq M max)

3.0 sq ft max (.28 sq M max)

www.gelighting.com

GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2015 GE.

OLP2981 (Rev 03/03/15)