GE PSB9100BLTS Specs
2x4’s or
equivalent
solid floor
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
19-1/8"
26-3/4"
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
19-1/8"
26-3/4"
C
L
2x4’s or
equivalent
solid floor
21-5/8"
over centerline
of cabinet
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
19-1/8"
26-3/4"
PSB9100EF/BL
GE Profile™ Series 27 in. Single Wall Oven with Advantium
ADVANTIUM WALL OVEN/GE PROFILE™ SERIES COOKING
TOWER DIMENSIONS AND CABINET INSTALLATION
INFORMATION (IN INCHES)
NOTE: Cabinets
installed adjacent
to wall ovens must
have an adhesion
spec of at least a
194°F temperature
rating.
NOTE: 2" minimum
between cutouts
when installed
above warming
drawer or single
wall oven.
INSTA L L ATION
INFORMATION:
Before installing,
consult installation
instructions packed
with product for current
dimensional data.
Cabinet width
29-3/4"
21-1/2"
of Control
19-1/8"
26-3/4"
Conduit
(46" long)
A
To back
A
4-3/16"
B
B
Junction box location
3" MIN between cutouts
recommended—2" MIN required
Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
9-1/4" cutout height
28-1/2" cutout width
2" MIN between cutouts
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
1" Min. above toekick or adjust
to oven installation height
(240-volt models only)
Suitable
to support
runners
®
Technology
bracing
(Must support 130 lbs.)
C
L
21-5/8"
over centerline
of cabinet
2x4’s or
equivalent
solid floor
Listed by
Underwriters
Laboratories
Speci fication Revise d 5/17
PSB9100EF/BL
GE Profile™ Series 27 in. Single Wall Oven with Advantium
FEATURES AND BENEFITS
Speedcook oven (120) - Enjoy oven-quality results two to four
times faster than a conventional oven
Multiple cooking functions - Expand your cooking versatility
with an all-in one oven
Halogen heat - Skip the preheating with nearly instantaneous
halogen heat
Over 175 preprogrammed menu selections - Preprogrammed
selections make meals easy
Custom recipe saver - Conveniently store cooking instructions
for up to 30 different recipes
Model PSB9100EFES – Slate
Model PSB9100BLTS - Black stainless
®
Technology
Speci fication Revise d 5/17
Loading...