GE PP7036SJSS Specification Sheet
PP7036SJ
PP9036SJ, PP7036SJ, JP5036SJ
ADA
COMPLIANT
GE Profile
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
™
Series 36" Built-In Knob Control Electric Cooktop
IMPORTANT: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires
a 15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with a
48" flexible armored cable.
NOTE: 36" Ribbon cooktops are approved for
use over select GE 30" Single Wall Ovens and
Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop
and downdraft installation instructions packed
with product before installing. Cooktop gas/
electric supply may need to be re-routed to
install downdraft. The countertop cutout
requires 23-1/2" minimum flat countertop
surface and 25" minimum total countertop
depth. In addition, other clearances to front
edge of the countertop must be considered.
Before installing, consult installation
instructions packed with product for
current dimensional data.
APPROXIMATE COOKING DIMENSIONS
20-1/2"
33-3/4"
3-1/4" at front of unit and
5-9/16" at conduit location
18-7/8"
1-3/4" MIN.
to rear wall
2-1/2" MIN.
Required
To insure accuracy, it is best to make a
template when cutting the opening in the counter
VOLTAGE (60HZ AC) 240V
CONNECTED LOAD (MAX.) 9.6 kW
CURRENT DRAW (MAX.) 40.0 Amps 34.7 A mps
RECOMMENDED CIRCUIT BREAKER†40 Amps 40 Amps
†
NOTE: Check local codes for required breaker size.
36-1/8"
Cooktop
33-7/8"
to 34"
19-1/8" to
19-1/4"
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
See label next
to nameplate for
MIN. clearance
to wall
Electrical junction box 16" MIN.
below countertop
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
208V
7.2 kW
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Listed by
Underwriters
Laboratories
Speci fication Revised 6/16
PP7036SJ
GE Profile
FEATURES AND BENEFITS
Five radiant cooking elements - Cook foods quickly and evenly
on this sleek, glass surface
6"/9"/12" tri-ring element - Use different pan sizes on this single, 3,000-watt
flexible element
5"/8" Power Boil element - Use different pan sizes on this single, 2,400-watt
flexible element that produces rapid powerful heat
SyncBurners - Control two 7" elements simultaneously to evenly heat large
cookware or griddles*
Keep Warm setting - Keep food warm with GE’s lowest heat setting or boil
water in minutes with this fully functional 6" element
Melt setting - Gently melt delicate foods without burning
or scorching
Control lock capability - Protects against unintended activation
Red LED backlit knobs with black glass surface and stainless
steel trim - Achieve a modern look with the convenience of knob controls
that complements the entire kitchen and other stainless steel appliances
™
Series 36" Built-In Knob Control Electric Cooktop
* OPTIONAL STAINLESS STEEL CLAD
ALUMINUM GRIDDLE
Achieve even results with this lightweight
griddle, tailored to fit GE SyncBurners. Order
part number JXGRIDL1 from your GE Dealer.
Hot surface indicator lights - Know when elements are too hot
to touch with a quick glance
Cooktop “On” indicator light - A light lets you know when
an element is active
Model PP7036SJSS - Stainless steel
GUARANTEED FIT
Replacing a similar cooktop from GE or another
brand? GE cooktops are guaranteed for an exact fit
to make replacement easy
Visit geappliances.com for more info
Speci fication Revised 6/16
Loading...