GE PP7036EJ, PP7036BM Specification

PP7036EJ/BM

CP9536SJ, PP9036DJ,

PP7036DJ, JP5036DJ

ADA

COMPLIANT

GE Profile

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

IMPORTANT: Requires a 5" free area between

the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires
a 15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with a
48" flexible armored cable.

NOTE: 36" Ribbon cooktops are approved for
use over select GE 30" Single Wall Ovens and
Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop
and downdraft installation instructions packed
with product before installing. Cooktop gas/
electric supply may need to be re-routed to
install downdraft. The countertop cutout
requires 23-1/2" minimum flat countertop
surface and 25" minimum total countertop
depth. In addition, other clearances to front
edge of the countertop must be considered.

Before installing, consult installation
instructions packed with product for
current dimensional data.

™

Series 36" Built-In Knob Control Cooktop

3-1/4" at front of unit and
5-9/16" at conduit location

1-3/4" MIN.

to rear wall

To insure accuracy, it is best to make a
template when cutting the opening in the counter

KW Rating

240V 9.6

208V 8.3

Amperage

240V 40 Amps

208V 40 Amps

2-1/2" MIN.

36"

18-7/8"

Required

†

†

NOTE: Check local codes

†

for required breaker size

Cooktop

33-7/8"

to 34"

20-3/8"

33-3/4"

19-1/8" to

19-1/4"

13" MAX. depth of unprotected

overhead cabinets (when no
hood or microwave is installed)

30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)

See label next

to nameplate for

MIN. clearance

to wall

Electrical junction box 16" MIN.

below countertop

2" MIN. clearance

to side wall from cut-out

on both sides of cooktop

15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop

For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.

Listed by
Underwriters
Laboratories

Speci fication Revise d 4/18

PP7036EJ/BM

GE Profile

FEATURES AND BENEFITS

Five radiant cooking elements – Cook foods quickly and evenly
on this sleek, glass surface

6"/9"/12" tri-ring element – Use different pan sizes on this single,
3,000-watt f lexible element

5"/8" Power Boil element – Use different pan sizes on this single,
2,400-watt flexible element that produces rapid powerful heat

SyncBurners – Control two 7" elements simultaneously to evenly
heat large cookware or griddles*

Keep Warm setting – Keep food warm with GE’s lowest heat setting
or boil water in minutes with this fully functional 6" element

Melt setting – Gently melt delicate foods without burning
or scorching

Control lock capability – Protects against unintended activation

Red LED backlit knobs with patterned glass surface – Achieve a
modern look with the convenience of knob controls

Hot surface indicator lights – Know when elements are too hot
to touch with a quick glance

Cooktop “On” indicator light – A light lets you know when an
element is active

™

Series 36" Built-In Knob Control Cooktop

* OPTIONAL STAINLESS STEEL CLAD

ALUMINUM GRIDDLE

Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer.

Model PP7036EJES – Slate

Model PP7036BMTS – Black stainless

Speci fication Revise d 4/18