GE PHP960DM, PHP900DM User Manual
Built-in CleanDesign™ cooktops
H
Cooktop
G
Required
E
F
W
D
GE Profile™
PHP960SM
PHP960DM
ADA-compliant
Features
Ceramic-glass surface
Number of elements 5 induction 4 induction
Induction elements
11" heating elements 1 (3700W) 1 (3700W) )**
8" heating elements 1 (3200W)**
7" heating elements 2 (2500W)** 2 (2500W)**
6" heating elements 1 (1800W) )** 1 (1800W)**
Hot surface indicator lights 5 4
Precise Digital Control System™
Pan presence sensor
Pan size sensor
Kitchen timer
Control lock capability
Appearance
Color appearance*
Frameless BB BB
Stainless steel frame SS models only SS models only
Weight & Dimensions
Cooktop width (in inches) 36 30
Approx. shipping wt. (lbs.) 59 49
Power/Ratings
KW rating @ 208V 6.5 5.6
Amps @ 208V 50 40
*SS = Stainless Steel, BB = Black on black.
** Highest wattage available using power share. Consult use and care manual for more
information on powershare.
240V 8.6 7.4
240V 50 40
●
Pattern. black
Pattern. black
● ●
● ●
● ●
● ●
● ●
● ●
SS
BB
PHP900SM
PHP900DM
Pattern. black
Pattern. black
SS
BB
Cooktop dimensions (in inches)
Model W D H E F G
PHP960DM
PHP900DM
* Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.
** Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.
Overall
36 20-7/8 3-1/4* 33-7/8 19-1/8 2-1/2**
29-3/4 21-3/8 3-1/4* 28-1/2 19-5/8 2-1/2**
Cutout
To edge of front
counter (min.)
Stainless steel cooktop dimensions (in inches)
Model W D H E F G
PHP960SM
PHP900SM
* Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.
** Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.
Overall Cutout
36-1/8 21 3-1/4* 33-7/8 19-1/8 2-1/2**
29-7/8 21-1/2 3-1/4* 28-1/2 19-5/8 2-1/2**
To edge of front
counter (min.)
Cooktop dimensions (in inches)
Built-in induction cooktops
Requires a 12” min. free area between the
bottom of the cooktop to any combustible
material, i.e. shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Unite are
furnished with a 36” flexible armored cable.
30” and 36” induction cooktops are approved
for use over GE, GE Profile and GE Monogram
30” and 27” single wall ovens*. Refer to cooktop
and wall oven installation instructions packed
with product for current dimensional data.
Filler trim kit
When replacing an old GE 30" cookto p (with
larger opening) with 30" model s, use the
following one-piece tri m kit to fill in the oversize hole. Available at additional cos t.
JXTR32B (Black)
Installation information:
Before installing, consult inst allation
instructions pac ked with produc t for current
dimensional data.
*Except Trivection® wall ovens.
Notes: If installing with a 36" GE Profile or GE Monogram
both cooktop and downdraf t installat ion instructions packed with product before ins talling.
Cooktop gas/electric supp ly may need to be re- routed to install downdraft.
The countertop must be at least 26" deep with a flat surface area of 23-1/2" or more, front to back.
Stainless CleanDesign and gas on glass co oktops require 23-5/8" flat surface area. In addition,
other clearances to the front edge of the counter top must be considered.
Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation prior to install.
®
Telescopic Downdraft System, cons ult
70
Loading...