GE PHP9030SJ, PHP9030BM Specification

PHP9030SJ/BM

PHP9030SJ

INSTALLATION ABOVE A WALL OVEN

GE Profile

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

IMPORTANT: Requires a 3" free area between

the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a 15"
minimum from cooktop to adjacent overhead
cabinets. Units are furnished with a 48" flexible
armored cable.

NOTE: 30" induction cooktops are approved
for use over select GE 27" and GE 30" Single
Wall Ovens and Warming Drawers. Refer
to cooktop and wall oven/warming drawer
installation instructions packed with product for
current dimensional data. If installed with a GE
Telescopic Downdraft System, consult both the
cooktop and downdraft installation instructions
packed with product before installing. Cooktop
gas/electric supply may need to be re-routed to
install downdraft. The countertop cutout requires
23-1/2" minimum flat countertop surface and 25"
minimum total countertop depth. In addition,
other clearances to front edge of the countertop
must be considered. Before installing, consult
installation instructions packed with product for
current dimensional data.

CUTOUT FILLER TRIM KIT: A filler trim kit
is available for use if your countertop cutout
is larger than the dimension shown, up to
29-13/16" x 20-7/16". Order JXTR32B for black or
JXTR32W for white, to reduce the cutout opening
for installation of this cooktop. These kits may be
ordered from your GE Appliances Dealer.

™

30" Built-In Touch-Control Induction Cooktop

APPROXIMATE COOKING DIMENSIONS

4-5/8" at baffle near center
ofunit (except when installed
above an approved wall
oven) and 3-1/4" at rear
of air intake

1-3/4" MIN.
to rear wall

To insure accuracy, it is best to make a
template when cutting the opening in the counter

INSTALLATION ABOVE A WALL OVEN

From front edge

of countertop to front

edge of cooktop cutout

31-1/4" MIN

From top surface

of countertop to

top surface of

wall oven support

platform

2-1/2" MIN.

Required

2-1/2" MIN

29-7/8"

19-1/4"

Cooktop

28-1/2" to

28-5/8"

28"

21"

19-5/8"

to 19-3/4"

13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)

30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)

Electrical junction box 16" MIN.

below countertop

2" MIN. clearance
to side wall from cut-out
on both sides of cooktop

KW RATING

240V 7.4

208V 6.4

AMPERAGE

240V 40 Amps

208V 40 Amps

15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop

†

NOTE: Check local

†

codes for required

†

breaker size.

For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.

ADA

COMPLIANT

Listed by
Underwriters
Laboratories

Specification Revised 6/20

PHP9030SJ/BM

GE Profile

FEATURES AND BENEFITS

Four induction elements

Digital touch controls

Power Boil (11" 3,700-watt induction element)

SyncBurners

Auto-pan size detection

Worry-free pan detection

Kitchen timer

Control lock capability

Red LED with black glass surface

Hot surface indicator lights

Fit Guarantee

Model PHP9030SJSS – Stainless Steel

Model PHP9030BMTS – Black stainless

™

30" Built-In Touch-Control Induction Cooktop

* OPTIONAL STAINLESS STEEL CLAD

ALUMINUM GRIDDLE

Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer.

GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand?
GE cooktops are guaranteed for an exact fit or GE Appliances will
pay up to $100 toward modifications

Visit geappliances.com for more info

Specification Revised 6/20