Page 1
PHP9030DJ
PHP9030DJ
INSTALLATION ABOVE A WALL OVEN
GE Profile™ 30" Built-In Touch-Control Induction Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 3" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required when
installing wall oven underneath cooktop. Refer to
installation instructions. Requires a 15" minimum
from cooktop to adjacent overhead cabinets. Units
are furnished with a 48" flexible armored cable.
NOTE: 30" induction cooktops are approved for
use over select GE 27" and GE 30" Single Wall
Ovens and Warming Drawers. Refer to cooktop and
wall oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic Downdraft
System, consult both the cooktop and downdraft
installation instructions packed with product
before installing. Cooktop gas/electric supply
may need to be re-routed to install downdraft.
The countertop cutout requires 23-1/2” minimum
flat countertop surface and 25” minimum total
countertop depth. In addition, other clearances
to front edge of the countertop must be considered.
Before installing, consult installation instructions
packed with product for current dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit
is available for use if your countertop cutout is
larger than the dimension shown, up to 29-13/16" x
20-7/16". Order JXTR32B for black or JXTR32W
for white, to reduce the cutout opening for
installation of this cooktop. These kits may be
ordered from your GE Appliances Dealer.
INSTALLATION ABOVE A WALL OVEN
APPROXIMATE COOKING DIMENSIONS
4-5/8" at baffle near center of
unit (except when installed
above an approved wall oven)
and
3-1/4" at rear of air intake
1-3/4" MIN.
to rear wall
2-1/2" MIN.
Required
To insure accuracy, it is best to make a
template when cutting the opening in the counter
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
29-3/4"
19-1/4"
Cooktop
28-1/2" to
28-5/8"
20-7/8"
28"
19-5/8"
to 19-3/4"
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
Electrical junction box 16" MIN.
below countertop
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
KW R ATI N G
240V 7.4
208V 6.4
AMPERAGE
240V 40 Amps
208V 40 Amps
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
†
NOTE: Check local
†
codes for required
†
breaker size.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
ADA
COMPLIANT
Listed by
Underwriters
Laboratories
Specification Revised 6/20
Page 2
PHP9030DJ
GE Profile™ 30" Built-In Touch-Control Induction Cooktop
FEATURES AND BENEFITS
Four induction elements
Digital touch controls
Power Boil (11" 3,700-watt induction element)
SyncBurners
Auto-pan size detection
Worry-free pan detection
Kitchen timer
Control lock capability
Red LED with black glass surface and stainless trim
Hot surface indicator lights
Fit Guarantee
Model PHP9030DJBB – Black on black
* OPTIONAL STAINLESS STEEL CLAD
ALUMINUM GRIDDLE
Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand?
GE cooktops are guaranteed for an exact fit or GE Appliances will
pay up to $100 toward modifications
Visit geappliances.com for more info
Specification Revised 6/20
Loading...