GE NTC Close-Coupled Surface Pumping System Data Sheet
GE Oil & Gas
NTC
Close-Coupled Surface Pumping System
Compact design combined with lower upfront
costs and minimal maintenance help maximize
run time and minimize operating costs.
The GE Oil & Gas Surface Pumping Systems No Thrust Chamber
(NTC) model is the latest oering designed to meet the needs of an
ever evolving, high demand market. Featuring a design that
does not require a thrust chamber, the NTC has lower upfront cost
and reduced system complexity to improve reliability. With ow rates
ranging from 15 gpm to 300 gpm, the NTC can be congured for a
wide range of applications, with higher output pressure than many
alternative pump technologies. The NTC can also be congured
with Abrasion Resistant bearings to further protect the system and
increase run life.
Specications
Flow Rate
Maximum Discharge
Pressure
Max Shaft Horsepower
(60Hz)
Max Fluid Temperature 200°F (93°C)
Housing Metallurgy
Stage Metallurgy Ni-resist Type 1
Maximum Suction PSI 260 psi (18 bar) @ 200°F (93°C)
Typical System Lengths 6ft (1.8 m) - 21ft (6.4m)
15 – 300 US gpm
(514-10,285 BPD or 82-1635 m
2500 psi (172 bar)
(Application dependent rating)
Up to 75 HP (56 kW)
Standard carbon steel
Corrosion resistant options
GE imagination at workGE imagination at work
3
/D)
GE Oil & Gas
4425 Westway Blvd
Houston, TX 77041 USA
713 260 6740
geoilandgas.com/sps
Applications
• Crude oil boosting/ transfer
• Jet pumping
• Lean amine circulation
• Mine dewatering
• Pipeline boosting
Features Benets
• Low pump thrust eliminates need for thrust
chamber
• Designed to be compact
• Designed with rear pull-out seal
• Standard C-Face, foot mounted NEMA frame
motors
• Non pulsating ow
• Reduced maintenance, upfront costs, and less
mechanical parts for repairs
• Small footprint reduces site space requirement and
optimizes facility design
• Minimal downtime for mechanical seal
maintenance or replacements
• Motor easily replaced
• Process uids transfer
• Produced water disposal
• Produced water injection
• LACT
Performance for SD & SE Series Pumps
2750
2500
2250
2000
1750
1500
1250
Pressure (psi)
1000
750
SD0019SD0013 SD0025
SD0038
SE0052
SD0052
SE0080
SE0115
SE0125
500
250
5
10 20 30 40 50 60 70 80 90 200100
SE0170
SE0230
Flow (US gpm)
GE imagination at work
Note: These values are for pumps running at 3570rpm at 1 SG.
Loading...