GE NPP-301 Product Data Sheet

e
Product Data Sheet
NPP-301 Series
Surface Mount Pressure Sensor
GE NovaSensor
Description
With constant voltage excitation, the NPP-301 produces a voltage output that is linearly propor­tional to the input pressure. The user can provide NPP Series products with signal conditioning cir­cuitry to amplify the output signal or to maximize OEM value added. The NPP Series is compatible with most noncorrosive gases and dry air.
Features
• Low-cost surface mount package: SO-8
• Wide operating temperature range: –40 to +125°C
• Static accuracy < 0.20% FSO maximum
• Suitable for automated component assembly
• Four element Wheatstone bridge configuration for circuit design flexibility
• Solid-state reliability
• 100, 200 and 700 kPa absolute pressure ranges available
Applications
• Automotive Tire Pressure
• Pneumatic Controls
• Pressure Switches and Controllers
• Altimeters and Barometers
• Cable Leak Detection
• Consumer Appliances
• Portable Gages and Manometers
2
6
4
5
–OUT
–IN
–IN
+
IN
+OUT
8
Schematic Diagram
Package Diagram
How to Order
Part Number Description Shipping
NPP-301A-100A 15 psia, non-ported IC tubes NPP-301A-200A 30 psia, non-ported IC tubes NPP-301A-700A 100 psia, non-ported IC tubes
NPP-301A-100AT 15 psia, non-ported tape & reel NPP-301A-200AT 30 psia, non-ported tape & reel NPP-301A-700AT 100 psia, non-ported tape & reel
NPP-301B-100A 15 psia, ported IC tubes NPP-301B-200A 30 psia, ported IC tubes NPP-301B-700A 100 psia, ported IC tubes
NPP-301B-100AT 15 psia, ported tape & reel NPP-301B-200AT 30 psia, ported tape & reel NPP-301B-700AT 100 psia, ported tape & reel
0.08
0.03 HOLE
0.05 TYP.
0.016 TYP.
0.16
0.24
0.07
0.01
0.02
0.01
0.11
0.06
0.20
8
7
6
5
–OUT
N/C
–IN
+IN
N/C
+OUT
–IN
N/C
1
2
3
4
0.08
0.03 HOLE
0.05 TYP.
0.016 TYP.
0.16
0.24
0.07
0.01
0.02
0.01
0.11
0.06
0.20
8
7
6
5
–OUT
N/C
–IN
+IN
N/C
+OUT
–IN
N/C
1
2
3
4
0.08
0.06
Note: All dimensions are in inches
NPP-301A
NPP-301B
查询NPP-301供应商
GE Novasensor 1055 Mission Court, Fremont, California 94539 www.novasensor.com Toll Free: 800-962-7364 Tel: 510-661-6000 Fax: 510-770-0645
ATTENTION
Static-Sensitive
Devices
Parameter Value Units Notes
General
Pressure Range 100 kPa 15 psi
200 kPa 30 psi 700 kPa 100 psi
Maximum Pressure 3 x rated pressure
Electrical
@ 25°C (77°F) unless otherwise stated Excitation 3.0 V 10VDC max. Input Impedance 5,000 ± 20% Output Impedance 5,000 ± 20%
Environmental
Electrostatic Damage (ESD) Class 1 Operating Temperature Range –40 to +125 °C –40° to +257°F
Mechanical
(1)
Weight 0.10 grams Media Compatibility Clean, dry air and noncorrosive gases
Parameter Units Min. Typ. Max. Notes
Performance Parameters
(Note 2) Offset mV/V ±10 Full Scale Output mV 60 ±20 Linearity %FSO ±0.20 3 Hysteresis and Repeatability %FSO 0.1 Thermal Coefficient of Zero %FSO/°C 0.04 4 Thermal Coefficient of Resistance %/°C +0.3 4 Thermal Coefficient of Sensitivity %FSO/°C –0.2 4 Thermal Hysteresis of Zero %FSO 0.1 5 Long-Term Stability of FSO %FSO 0.2 6
Notes: 1. Standard IC industry bake operations should be used prior to surface mount operations. Consult factory for further information.
2. Values measured at 3VDC and 22°C, unless otherwise noted. 3. Best fit straight line. 4. Typical coefficients, between 0° and +70°C.
5. 0° to 70°C. 6. Typical value over one year.
Specifications
g
GE NovaSensor
SM0025 Rev. F 04/03
NPP-301 Series Surface Mount Pressure Sensor
Sales Terms:
GE NovaSensor standard sales terms apply. Prices and specifications are subject to change without notice.
Warranty:
GE NovaSensor warrants its products against defects in material and workmanship for 12 months from the date of shipment. Products not subjected to misuse will be repaired or replaced. GE NovaSensor reserves the right to make changes without further notice to any products herein. NovaSensor makes no warranty, representation or guarantee regarding the suitability of its products for any particular application, nor does GE NovaSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims and all liability without limitation consequential or inci­dental damages. The foregoing warranties are exclusive and in lieu of all other war­ranties, whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE SHALL APPLY.
Loading...