Page 1
GE
Lighting
®
Tetra
LED Lighting System
Wet or dry—our brightest solution
for small channel letters
miniMAX
Page 2
®
Tetra
miniMAX
Maximized Output. Minimized Expense.
Tetra® miniMAX—the remarkable LED system designed for small channel letters as shallow as 1.5 inches
in depth—is now
and operates efficiently. Working closely with sign builders and owners, we’ve refined our design to improve
performance while decreasing the amount of product required, further reducing installation and material costs.
Our system can now operate 68 feet of product per 60W power supply (up from 60 feet in our previous design)
and deliver
13
Powerful OptiLens
Tetra miniMAX features
light and redirects it towards the illuminated surface with impressive uniformity. It optimizes
each LED—which enables wider stroke spacing—reducing the amount of material needed per
sign while helping protect the LED against moisture, humidity, damage and corrosion.
%
10
brighter than our previous product. It delivers incredibly uniform light, installs easily
%
greater loading for even better material and installation labor savings.
™
OptiLens™ a patented technology that captures otherwise wasted
10% Brighter!
New Tetra® miniMAX Wet Location Rated
Now there’s a miniMAX solution for wet locations where saturation with water or other liquids is likely. It’s all the
same performance features of miniMAX—plus overmolded design that protects against water egress, dust and
damage and a special module top surface to eliminate water retention—no separate enclosure is required.
Lens and overmold sealing
Continuous wire through LED module
uses IDC connectors vs. soldering for
maximum strain relief
Color Dot on top
White-Gray, WW-Yellow
improved to meet IP66 with
5 Year Warranty
OptiLens™ creates a wide viewing
angle, maximizing light coverage area
while protecting the LED
Can cut between
any modules
Overmolded design protects
components from moisture,
damage and corrosion
Tab on back of 3M tape for
faster & easier removal
Pre-drilled hole makes
mounting easy
Page 3
Can cut product required
almost in half
Many LED systems use about 13 LED modules in 2 rows to fill a
capitol "T" channel letter that’s 2 feet high.
Improved Tetra miniMAX, requires just 7 LED modules to fill the exact same letter
(giving up some brightness) while providing outstanding uniformity. That’s
%
46
fewer modules.
Use one row, not two. Tetra miniMAX stretches stroke spacing to an impressive 7 inches in a 3-inch
depth channel while maintaining impressive light uniformity on the sign face. It protects your customers’ brand
image while reducing product costs and saving you installation time.
Total GE Reliability
To ensure every Tetra miniMAX installation will operate brilliantly for years, we perform the most extensive,
stringent testing in the industry. Rather than rely solely on test data from LED suppliers, we test the LED,
sub-system and complete system at our in-house and independent laboratories around the world. Validation
of our designs, components, products and processes include high-temperature, high-humidity and accelerated
life testing.
Page 4
Components
SKU Description Package Quantity
GEMM71-W1 Tetra® miniMAX Wet White 7100K 100 ft (30.48 m)/box (250 modules)
GEMM50-W1 Tetra® miniMAX Wet Warm White 5000K 100 ft (30.48 m)/box (250 modules)
GEMM41-W1 Tetra® miniMAX Wet Warm White 4100K 100 ft (30.48 m)/box (250 modules)
GEMM32-W1 Tetra® miniMAX Wet Warm White 3200K 100 ft (30.48 m)/box (250 modules)
GEMM71-2 Tetra® miniMAX White 7100K 100 ft (30.48 m)/box (250 modules)
GEMM50-2 Tetra® miniMAX Warm White 5000K 100 ft (30.48 m)/box (250 modules)
GEMM41-2 Tetra® miniMAX Warm White 4100K 100 ft (30.48 m)/box (250 modules)
GEMM32-2 Tetra® miniMAX Warm White 3200K 100 ft (30.48 m)/box (250 modules)
GEMMRD-1 Tetra® miniMAX Red 100 ft (30.48 m)/box (250 modules)
GEMMBL-1 Tetra® miniMAX Blue 100 ft (30.48 m)/box (250 modules)
GEMMGL-1 Tetra® miniMAX Green 100 ft (30.48 m)/box (250 modules)
GEMMPO-1 Tetra® miniMAX Orange 100 ft (30.48 m)/box (250 modules)
9409 18 AWG Supply Wire (0.82 mm2) 500 ft /spool (152.4 m)
191600041 22-14 AWG Twist-On Wire Connectors (0.33 - 2.08 mm2) 500/ PK
192160004 18-14 AWG In-line Connectors (IDC) (0.82-2.08 mm2) 500/ PK
Technical Specifications
Typical Typical Energy Energy
Brightness Brightness Consumption Consumption Power Supply Viewing
Color Wavelength (lumens/module) (lumens/ft.) (Strip/Module) (System/Module) Loading Angle
Tetra miniMAX White Wet 7100K, 5000K 36 90 0.32 0.38 68ft (170 modules) 150
Tetra miniMAX Warm White Wet 4100K, 3200K 34, 30 85, 75 0.32 0.38 68ft (170 modules) 150
Tetra miniMAX White 7100K, 5000K 36 90 0.32 0.38 68ft (170 modules) 150
Tetra miniMAX Warm White 4100K, 3200K 34, 30 85, 75 0.32 0.38 68ft (170 modules) 150
Tetra miniMAX Red 625nm 11 27 0.39 0.47 60ft. (150 modules) 150
Tetra miniMAX Blue 467nm 8 19 0.39 0.47 60ft. (150 modules) 150
Tetra miniMAX Green 530nm 24 60 0.39 0.47 60ft. (150 modules) 150
Tetra miniMAX Orange 606nm 19 48 0.48 0.59 60ft. (150 modules) 150
Specification Item Specification
LEDs/ Module 3
Module/ft. 2.5
Cutting Resolution Cut on wire between every module
Power Supply GEPS12-20 Input: 90-264VAC; Output: 12VDC
GEPS12-60-NA Input: 108-305VAC; Output: 12VDC
GEPS12-60-GL Input: 108-305VAC; Output: 12VDC
GEPS12W-60 Input: 90-264VAC; Output: 12VDC
GEPS12D-60U Input: 90-305VAC; Output: 12VDC
Maximum Supply Wire Limits 60W, 80W, 100W, 180W 20W Supply Wire Gauge
15 ft. (4.6 m) 30 ft . (9.1 m) 18AWG/0.82mm2 supply wire - 9409
23 ft. (7.0 m) 16AWG/1.31mm2 supply wire
38 ft. (11.6 m) 14AWG/2.08mm2 supply wire
65 ft. (19.8 m) 12AWG/3.31mm2 supply wire
Wiring to be installed in accordance with Article 725 of the National Electric code (NEC).
Operating Environment -40 °C to + 60 °C
Module Dimensions (h x l x w) Wet 0.31 x 2.27 x 0.72 in (9.5 x 57.7x 18.2 mm)
Module Dimensions (h x l x w) 0.31 x 1.89 x 0.47 in ( 8 x 48 x 12 mm)
Sign Dimensions For best results, recommended sign depth is 1.5 inches (38mm) or greater
Warranty GE offers a limited system warranty of up to five (5) years
System Certifications UL Recognized #E219167, UL Classified #E229508, CE, C-tick, RoHS,
IP66 rated for dry, damp or wet location
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2015 GE.
SIGN099 (Rev 01/12/15)
Loading...