Any GE Interlogix, Kalatel division, software
supplied with GE Interlogix, Kalatel division,
products is proprietary and furnished under
license and can be used or copied only in
accordance with the terms of such license.
This document contains proprietary
information that is protected by copyright. No
part of this document may be reproduced or
transmitted in any form or by any means
without the prior written permission of GE
Interlogix, Kalatel division.
The information contained in this document is
subject to change without notice. GE
Interlogix, Kalatel division, in keeping pace
with technological advances, is a company of
product innovation. Therefore, it is difficult to
ensure that all information provided is entirely
accurate and up-to-date. GE Interlogix, Kalatel
division, accepts no responsibility for
inaccuracies or omissions and specifically
disclaims any liabilities, losses, or ris ks,
personal or otherwise, incurred as a
consequence, directly or indirectly, of the
use or application of any of the contents of
this document.
For the latest product specifications, visit
GE Interlogix, Kalatel division, online at
www.kalatel.com or contact your Kalatel
sales representative.
For technical support before and after installation, call 800-469-1676.
Technical support is available 24 hours a day, 7 days a week.
Call: Tech Support 800-469-1676 (6 A.M. – 5 P.M. PST Monday through Friday)
Tech Support 541-740-3589 (all other times)
Main800-343-3358 or 541-754-9133
Fax: Tech Support 541-752-9096 (avail abl e 24 hours a day)
Main 541-754-7162
Web: www.GE-Interlogix.com
1041075C / November 2003
This equipment has been tested and
found to comply with the limits for a
Class A digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may cause
harmful interference to radio
communications.
You are cautioned that any changes or
modifications not expressly approved
by the party responsible for compliance
could void the user's authority to
operate the equipment.
KTC-117/217/247 User Manual Table of Contents
TABLE OF CONTENTS
BEFORE YOU BEGIN ...............................................................4
2 CAMERA BACK PANEL ......................................................6
3 PROGRAMMING THE DIP SWITCH.......................................7
3.1 BACKLIGHT COMPENSATION (BLC OFF OR ON).........7
3.2 F
3.3 W
LICKER CONTROL (FL OFF OR ON).........................7
HITE BALANCE (ATW OR FIX) ................................8
3.4 VIEW (NORMAL OR MIRROR)......................................8
3.5 ZOOM (NORMAL OR E ZOOM).....................................8
4 INSTALLING THE BRACKET AND CAMERA ............................9
4.1 MOUNTING THE BRACKET ........................................10
4.2 ATTACHING THE CAMERA TO THE BRACKET...............11
4.3 ADJUSTING THE CAMERA ANGLE ..............................12
5 MAKING CABLE CONNECTIONS ........................................13
6 MAKING CAMERA ADJUSTMENTS .....................................15
6.1 OPENING THE HOUSING...........................................15
6.2 ADJUSTING THE CAMERA ZOOM AND FOCUS .............16
6.3 ADJUSTING THE DIRECT DRIVE LEVEL.......................16
1041075C / November 2003 3
Before You Begin KTC-117/217/247 User Manual
BEFORE YOU BEGIN
Read these instructions before installing or operating this product.
Note: This installation should be made by a qualified service person and should conform to
local codes.
This manual provides installation and operation information. To use this
document, you must have the following minimum qualifications:
• A basic knowledge of CCTV systems and components
• A basic knowledge of electrical wiring and low-voltage electrical
hookups
Use this product only for the purpose for which it was designed.
Customer Support
For assistance in installing, operating, maintaining, and troubleshooting
this product, refer to this document and any other documentation
provided. If you still have questions, contact Kalatel Technical Support:
GE Interlogix, Kalatel division
Call: 800-469-1676
Fax: 541-752-9096
Note: You should be at the equipment, ready with details before calling Technical Support.
Conventions Used in this Manual
Boldface or button icons highlight command entries. The following
WARNING, CAUTION, and Note statements identify potential hazards:
* WARNING:
Improper use of this equipment can cause severe bodily injury or
equipment damage.
** CAUTION:
Improper use of this equipment can cause equipment damage.
Note: Notes contain important information about a product or procedure.
* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.
4 1041075C / November 2003
KTC-117/217/247 User Manual Introduction
1 INTRODUCTION
The KTC-117/217/247 cameras come in an all-in-one package that
includes the components shown in Figure 1.
24 VAC
Camera
Figure 1. Package contents
Mounting hardware
and BNC connectors
Mounting
bracket
Power
supply unit
See Table 1 for the camera models and their descriptions.
Table 1. KTC-117/217/247 camera models
Model Camera type Built-in lens
KTC-117V3 B/W, high res. 3 – 8 mm
KTC-117V9 B/W, high res. 9 – 22 mm
KTC-217CV3 Color, high res. 3 – 8 mm
KTC-217CV9 Color, high res. 9 – 22 mm
KTC-247CEV3 Ex-View Color, high res. 3 – 8 mm
KTC-247CEV9 Ex-View Color, high res. 9 – 22 mm
1041075C / November 2003 5
Camera Back Panel KTC-117/217/247 User Manual
2 CAMERA BACK PANEL
See Figure 2 when performing the camera setup and adjustment
procedures.
Direct drive auto iris
DIP switch
level adjuster
Terminal block Pow er LED Video out
Figure 2. Camera back panel
6 1041075C / November 2003
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.