GE KTC-117V3, KTC-217CV3, KTC-117V9, KTC-217CV9, KTC-247CEV3 User Manual

...

0 (0)

KTC-117V3/117V9 KTC-217CV3/217CV9 KTC-247CEV3/247CEV9 Cameras

Any GE Interlogix, Kalatel division, software supplied with GE Interlogix, Kalatel division, products is proprietary and furnished under license and can be used or copied only in accordance with the terms of such license.

This document contains proprietary information that is protected by copyright. No part of this document may be reproduced or transmitted in any form or by any means without the prior written permission of GE Interlogix, Kalatel division.

The information contained in this document is subject to change without notice. GE Interlogix, Kalatel division, in keeping pace with technological advances, is a company of product innovation. Therefore, it is difficult to ensure that all information provided is entirely accurate and up-to-date. GE Interlogix, Kalatel division, accepts no responsibility for inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or indirectly, of the

use or application of any of the contents of this document.

For the latest product specifications, visit GE Interlogix, Kalatel division, online at www.kalatel.com or contact your Kalatel sales representative.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

You are cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

For technical support before and after installation, call 800-469-1676.

Technical support is available 24 hours a day, 7 days a week.

Call:	Tech Support	800-469-1676 (6 A.M. – 5 P.M. PST Monday through Friday)
	Tech Support 541-740-3589		(all other times)
	Main	800-343-3358 or 541-754-9133
Fax:	Tech Support	541-752-9096	(available 24 hours a day)
	Main	541-754-7162
Web:	www.GE-Interlogix.com

1041075C / November 2003

KTC-117/217/247 User Manual Table of Contents

TABLE OF CONTENTS

BEFORE YOU BEGIN ...............................................................			4
1	INTRODUCTION .................................................................		5
2	CAMERA BACK PANEL ......................................................		6
3	PROGRAMMING THE DIP SWITCH .......................................		7
	3.1	BACKLIGHT COMPENSATION (BLC OFF OR ON) .........	7
	3.2	FLICKER CONTROL (FL OFF OR ON) .........................	7
	3.3	WHITE BALANCE (ATW OR FIX) ................................	8
	3.4	VIEW (NORMAL OR MIRROR) ......................................	8
	3.5	ZOOM (NORMAL OR E ZOOM).....................................	8
4	INSTALLING THE BRACKET AND CAMERA ............................		9
	4.1	MOUNTING THE BRACKET ........................................	10
	4.2	ATTACHING THE CAMERA TO THE BRACKET ...............	11
	4.3	ADJUSTING THE CAMERA ANGLE ..............................	12
5	MAKING CABLE CONNECTIONS ........................................		13
6	MAKING CAMERA ADJUSTMENTS .....................................		15
	6.1	OPENING THE HOUSING ...........................................	15
	6.2	ADJUSTING THE CAMERA ZOOM AND FOCUS .............	16
	6.3	ADJUSTING THE DIRECT DRIVE LEVEL.......................	16

1041075C / November 2003

Before You Begin

KTC-117/217/247 User Manual

BEFORE YOU BEGIN

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform to local codes.

This manual provides installation and operation information. To use this document, you must have the following minimum qualifications:

•A basic knowledge of CCTV systems and components

•A basic knowledge of electrical wiring and low-voltage electrical hookups

Use this product only for the purpose for which it was designed.

Customer Support

For assistance in installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact Kalatel Technical Support:

GE Interlogix, Kalatel division

Call: 800-469-1676

Fax: 541-752-9096

Note: You should be at the equipment, ready with details before calling Technical Support.

Conventions Used in this Manual

Boldface or button icons highlight command entries. The following WARNING, CAUTION, and Note statements identify potential hazards:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

** CAUTION:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

*This symbol indicates electrical warnings and cautions.

**This symbol indicates general warnings and cautions.

4	1041075C / November 2003

GE KTC-117V3, KTC-217CV3, KTC-117V9, KTC-217CV9, KTC-247CEV3 User Manual

KTC-117/217/247 User Manual

Introduction

1 INTRODUCTION

The KTC-117/217/247 cameras come in an all-in-one package that includes the components shown in Figure 1.

24 VAC	Mounting hardware	Mounting	Power
Camera	and BNC connectors	bracket	supply unit

Figure 1. Package contents

See Table 1 for the camera models and their descriptions.

Table 1. KTC-117/217/247 camera models

Model	Camera type	Built-in lens
KTC-117V3	B/W, high res.	3	– 8 mm

KTC-117V9	B/W, high res.	9	– 22 mm
KTC-217CV3	Color, high res.	3 – 8 mm

KTC-217CV9	Color, high res.	9	– 22 mm
KTC-247CEV3	Ex-View Color, high res.	3	– 8 mm

KTC-247CEV9	Ex-View Color, high res.	9	– 22 mm

1041075C / November 2003

Camera Back Panel

KTC-117/217/247 User Manual

2 CAMERA BACK PANEL

See Figure 2 when performing the camera setup and adjustment procedures.

	Direct drive auto iris
DIP switch	level adjuster

Terminal block

Power LED

Video out

Figure 2. Camera back panel

6	1041075C / November 2003

+ 14 hidden pages