GE JTP15AD, JTP15BD, JTP15CD, JTP15SD, JTP15WD Specification

Add suitable filler to match adjacent cabinets when needed to maintain toe kick alignment

GE Appliances

JTP15AD/BD/CD/SD/WD - GE 30" Built-In Single Wall Oven

Undercounter Installation (in inches)

Optional Undercounter Installation with 30" CleanDesign

 

or Sealed Burner Gas Cooktop (in inches)

25

Top and/or side fillers may be necessary if unit is positioned between existing cabinets

Gas or electric cooktops may be installed over

 

 

 

 

 

 

this oven. See cooktop installation instructions

 

 

 

 

 

 

for cutout size. See label on top of oven for

 

 

 

 

 

 

 

approved cooktop models.

 

 

 

 

 

Gas (including the pressure regulator)

 

 

 

 

 

Junction box

 

 

Gas

 

and electrical connections for

 

 

 

 

 

 

 

 

gas cooktop must be located in an

 

 

 

 

 

location

 

 

connection

adjacent accessible location to the right.

 

 

 

 

 

240/208V

 

 

 

 

 

For a 36" gas cooktop, the connections

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

may be made to the left.

 

 

 

 

 

 

 

 

 

 

 

 

23-1/2" MIN.

 

 

 

 

 

 

 

 

120 Volt

 

 

 

Cutout depth

 

 

 

 

 

 

 

 

Outlet

1-1/2"

 

 

28-1/2'' MIN.

 

 

 

 

 

 

 

 

 

 

 

Countertop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

28-5/8'' MAX.

 

Allow 11/16''

 

 

 

 

 

 

 

 

 

27-1/4'' MIN.

 

 

 

 

22'' MIN.

above

 

 

27-5/16'' MAX.

 

 

overlap over side

 

support platform

36''

MIN.

Cutout height

 

edges of cutout

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3/4'' Support

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

platform required

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24

 

 

 

 

Match toe kick height

front and two sides

4'' To 4-1/2 '' Toe kick allowable

1-1/2" Typical countertop

Free space

1-1/2" MIN.

30-7/16

5-9/16" Reference dim. for MAX. support height

with typical 36" countertop height

27-1/4" MIN.

27-5/16" MAX. Cutout height

Power cord

Junction box(s) for

oven & radiant

cooktop 22" from

floor

36" Typical

Countertop height

22

Reference

5-9/16

Side View

Note: Oven is rated for use only under the following cooktops:

30" and 36" standard sealed burner gas cooktops and selected 36” and 30” CleanDesign and Calrod® electric cooktops (excludes JP968/938).

Note: Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on back of oven for approved cooktop models.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data and for alternate installation options.

Specification Created 7/01

This installation is to achieve minimum gap between bottom of countertop and control panel. Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick. Note: Cabinets installed adjacent to wall ovens must have an adhesion spec

of at least 194° temperature rating.

For answers to your Monogram,® GE Profileor

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

R Laboratories

GE JTP15AD, JTP15BD, JTP15CD, JTP15SD, JTP15WD Specification

GE Appliances

JTP15AD/BD/CD/SD/WD - GE 30" Built-In Single Wall Oven

Optional Undercounter Installation

Single Oven Wall-Mount or Cabinet Installation

with 36" Gas Cooktop (in inches)

Dimensions (in inches)

3-1/2" MIN. Free space

30" Built-in

oven

4" To 4-1/2"

3-1/4

 

 

 

Cutout width

 

 

 

28-1/2'' MIN.

 

 

 

 

 

 

 

 

 

 

 

 

19-1/16" Cutout depth

 

28-5/8'' MAX.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 (two) 90°elbows &

 

 

 

sufficient pipe to

 

 

 

connect in adjacent

 

 

 

cabinet

 

 

Conduit

Junction box

29-3/4

 

(48" long)

 

 

for oven

 

 

 

 

A

 

 

 

1/2" Black

Junction box in

 

 

adjacent cabinet

 

Conduit

iron pipe

for counter unit

28-1/4

(48" long)

Pressure

hook-up

 

 

22

 

 

regulator

 

 

Union

 

 

 

 

Power cord

 

 

Shut-off

for counter unit

 

 

valve

 

 

 

3/4" Support

 

21

 

 

 

 

Right cabinet side

 

Allow minimum of 21'' for clearance

30

 

to adjacent corners, drawers, walls, or etc.

 

 

5

 

 

23-1/2'' MIN.

 

 

Cutout depth

Junction

 

 

 

box

B

location

 

 

 

 

 

 

 

 

 

27-1/4'' MIN.

22'' MIN.

27-5/16'' MAX.

 

 

Cutout height

 

 

 

 

Recommended

 

 

cutout location

 

 

32-1/2"

 

 

 

from floor

 

 

Side View

A=Allow 1" overlap of oven over top and bottom edges of cutout.

 

B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

KW Rating

240V 3.6

208V 2.7

Breaker Size

20 Amps

Installation Information: Before installing, consult installation instructions packed

with product.

C

L

2 x 4 or equivalent runners

Suitable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

bracing

21-5/8"

 

 

 

to support

 

 

 

runners

 

 

over centerline

 

 

 

 

 

 

 

 

 

of cabinet

For answers to your Monogram,® GE Profileor GE appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

(Must Support 275 LBS.)

 

Listed by

 

 

Underwriters

Specification Created 7/01

R

Laboratories

 

 

Loading...
+ 1 hidden pages