97859 Instructions.quark 2/26/02 1:28 PM Page 1
Scroll Mouse
HO97859
Instruction Manual www.ge-electronics.com
97859 Instructions.quark 2/26/02 1:28 PM Page 2
CONTENTS
Connecting Your Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installing the iWheelworks Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Customizing Your Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Customizing Your Own Command Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Customizing Your Scroll Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Instrucciones en Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
97859 Instructions.quark 2/26/02 1:28 PM Page 3
CONNECTING YOUR MOUSE
CAUTION: Always turn off your computer before connecting or disconnecting
your mouse. To connect your mouse, plug the PS/2 connector
into your computer’s PS/2 port.
INSTALLINGYOUR iWHEELWORKS SOFTWARE
PS/2
Mouse Port:
In order to take full advantage of your mouse, you must install the enclosed
software. While your input device will work as a basic mouse once it is plugged
in, the software must be loaded to use the programmable features.
To install from Windows® 95/98/Me/NT/2000:
1. Insert the Mouse SETUP DISK into your floppy disk drive.
2. Click the Start button and then click Run.
3. Now type <drive>:\ setup. For example, if the Mouse SETUP DISK is in
drive A, type: a:\ setup
4. Now click OK . (Follow the on-screen instructions.)
NOTE: If you do not restart your computer, the software will not operate.
5. Once restarted, the mouse icon 8 should appear in the Windows® system
tray. Double click the icon to bring up your mouse control panel.
CUSTOMIZING YOURMOUSE
From the mouse control panel, you can customize your mouse to meet your individual needs! Just click on the appropriate tab to adjust settings:
1
97859 Instructions.quark 2/26/02 1:28 PM Page 4
Button
Customizing Your Buttons – click on the Button tab:
-Button Assignments - Easy drop down menus allow you to set each program-
mable button to execute any individual command. Just click the down arrows
to see the list of commands you have to choose from. Then, click on the one
you want.
-iWheelWorks Enhanced Productivity Option – Drop down menus for each button include a "NetJump" and "LuckyJump" command. Selecting either of these
options programs the button to display a pop up menu with 14 commands to
choose from! To customize the commands in the "NetJump" or "LuckyJump"
pop up menus, click on the Settings tab and follow the instructions below
(under "Customizing Your Own Command Menus").
-Double Click Speed – Increase the speed to execute a double-click
-Set for Right or Left Handed User – The default setting for buttons 1 and 2 will
be reversed.
Customizing Your Own Command Menus - click on Settings tab:
-NetJump Command Menu (top grid) – The top grid is your NetJump command
menu - this grid comes preprogrammed with 14 commonly used Web-browsing
commands.
Pointers
Motion
Settings
-LuckyJump Command Menu (bottom grid) – The bottom grid is you LuckyJump
2