GE GE616 Installation And Operating Manual
GE616 Proximity Reader Last Update August 24, 2005
GE616 Proximity Reader Last Update August 24, 2005
Table of Contents
1. Important safety instructions 3
2. Introduction 5
3. Identifying supplied parts 5
4. Specification 6
5. Installation 6
6. Wire Connection to Controller 7
7. Wire Color Table of the Reader 7
8. Operation 8
9. The Maximum Length of the Wiegand Cable 9
10. FCC Registration Information 10
11. Warranty and Service 11
GE616 Proximity Reader Last Update August 24, 2005
3
1. Important safety instructions
To prevent injuries to persons and damages to property, please
read all the instructions and follow them whenever you deal
with this product.
After reading, please put this instruction manual where it can be
easily seen for the system operator.
ON INSTALLATION AND POWER
Use 12V DC power ONLY.
- Connecting to higher than 12V DC may result in a risk of
electric shock, fire, or heavy damage
of the unit.
Do NOT install this product at places with wet or metallic dust,
or that can be watered.
- There may be risks of electric shock and fire.
Do NOT install this product near electric motors running.
- The unit may not operate normally.
Do NOT set this product near heaters or anything that
produces heat.
- There may be a risk of fire.
Be ALWAYS careful not to short-circuit any part of the circuitry
with tools like a screwdriver in hand.
- There may be a risk of fire or heavy damage of the unit.
GE616 Proximity Reader Last Update August 24, 2005
4
ON MAINTENANCE
Do NOT use any kind of liquid for cleaning.
- There may be a risk of electric shock, fire or heavy damage
of the unit.
Use an air spray, if needed.
Users are cautioned NOT to attempt repair of this product or
modify the wirings set by the installer at their own discretion.
- It may pose the risk of fire, hardware damages, or abnormal
operations of the unit.
It is recommended not to use a flammable spray or something easy to burn near this product.
- There may be the risk of an explosion or fire.
Keep the unit away from any unauthorized people.
- It may cause abnormal operations of the unit.
NOTICE
Please, contact a designated service center or the outlet at
which the product was purchased when
A. Any liquid has been spilt or sprayed onto the product.
In this case, cut the power off first.
B. The product seems to be operating abnormally.
C. The unit exhibits a distinct change in performance.
D. The unit has fallen to be broken down or damaged on
its case.
* The cost of repairing can be charged for troubles due
to the improper handling or negligence of users or
the operator.
GE616 Proximity Reader Last Update August 24, 2005
5
2. Introduction
The GE616 is an elegant looking and an attractive 4" read
range proximity reader which can be mounted to metal door
frame (mullion) or any flat wall surface. The GE616 is epoxy
potted that ensure you successful operation even in harsh
environments. Two colors LED of green and red, inside Piezo
buzzer sound will guarantee you an accurate and reliable
system operations.
3. Identifying supplied parts
Please unpack and check the contents of the box.
Reader
Module
GE616
Bezel
Manual Screws
(1ea) (1ea) (1 copy) (4ea)
Loading...