GE
Lighting
™
Evolve
N Series (EWNA)
LED Wall Pack
imagination at work
Product Features
The next generation of the GE Evolve™ LED Wall Pack is designed to efficiently illuminate walkways, area, and general
lighting applications. The EWNA features an advanced LED optical system that provides high uniformity, excellent
vertical light distribution, reduced on-site glare and effective security light levels. The EWNA Wall Pack offers identical
photometrics to the EANA Area Light, which allows lighting designers to capitalize on the same features without
compromising site layouts. In keeping with a sleek design strategy, this product offers a modern look, balancing the need
for photometric scalability with reliable workhorse performance.
Applications
• Wall mounted, site, area and general lighting utilizing
an advanced LED optical system providing uniformity,
vertical light distribution, reduced on-site glare and
effective security light levels.
Housing
• Die-cast aluminum housing.
• Slim architectural design incorporates an integral
heat sink and light engine, ensuring maximum heat
transfer, long LED life, and a reduced Effective
Projected Area (EPA).
• Meets 1G vibration level per ANSI C136.31-2001.
For 2G rating contact manufacturer.
LED & Optical Assembly
• Structured LED array for optimized area light and
wall pack photometric distribution.
• Evolve™ LED light engine utilizes reflective technology
to optimize application efficiency and minimize glare.
• Utilizes high brightness LEDs, 70 CRI at 4000K
& 5000K typical.
Lumen Maintenance
• System rating is L85 at 50,000 hours. Contact
manufacturer for Lxx rating (Lumen Depreciation)
beyond 50,000 hours.
Ratings
Mounting
• Flush wall mount with convenient tab and slot
mounting for easy “J” box installation. 1/2” conduit
holes are included for non-“J” box installation.
Finish
• Corrosion resistant polyester powder painted,
minimum 2.0 mil. thickness.
• Standard colors: Black and Dark Bronze.
• RAL & custom colors available.
Electrical
• 120-277 volt and 347-480 volt available.
• System power factor is >90% and THD <20%.
• Photo electric sensors (PE) available for all voltages.
• GE dimmable PE socket is available making the
unit “adaptive controls ready.” Contact
manufacturer for details.
• Dimming:
- Wired 0-10V continuous dimming with “D”
option code
- Stand-alone motion sensor based dimming using
“H” option code
• Surge Protection Options:
For 120-277VAC and 347-480VAC per IEEE/ANSI
C136.2-2014.
– 6kV/3kA “Basic” surge protection, standard.
– 10kV/5kA “Enhanced” surge protection available
with “R” option code.
/
• listed, suitable for wet locations.
(For cUL availability contact manufacturer)
• IP66 rated optical enclosure per ANSI C136.25-2009.
• Temperature rated at –40° to 50°C.
• Upward Light Output Ratio (ULOR) = 0
• Title 24 compliant with “H” motion sensor option.
• Compliant with the material restriction
requirements of RoHS.
Ordering Number Logic
Evolve LED Wall Pack N Series (EWNA)
E W N A 5
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PROD. ID
E = Evolve
W = Wall Pack
N =
Series
OPTICAL
CODE
TYPE IVTYPE IIITYPE II
*Rating values for B and G are based on rated lumens and may vary due to flux tolerances.
PHOTOMETRIC
SERIES
A = Photometric
Series “A”
Housing
TYPE
A4 Asymmetric Forward 3,730 3,750 46 46 1-0-1 1-0-1 EWNA_A4540__-120-277V.IES EWNA_A4550__-120-277V.IES
B4 Asymmetric Forward 5,510 5,540 65 65 1-0-2 1-0-2 EWNA_B4540__-120-277V.IES EWNA_B4550__-120-277V.IES
C4 Asymmetric Forward 7,180 7,210 85 85 1-0-2 1-0-2 EWNA_C4540__.IES EWNA_C4550__.IES
D4 Asymmetric Forward 8,810 8,850 104 104 1-0-2 1-0-2 EWNA_D4540__.IES EWNA_D4550__.IES
E4 Asymmetric Forward 10,370 10,410 123 123 2-0-2 2-0-2 EWNA_E4540__.IES EWNA_E4550__.IES
F4 Asymmetric Forward 12,320 12,380 148 148 2-0-3 2-0-3 EWNA_F4540__.IES EWNA_F4550__.IES
A3 Asymmetric Wide 4,070 4,090 46 46 1-0-1 1-0-1 EWNA_A3540__-120-277V.IES EWNA_A3550__-120-277V.IES
B3 Asymmetric Wide 6,010 6,040 65 65 1-0-1 1-0-1 EWNA_B3540__-120-277V.IES EWNA_B3550__-120-277V.IES
C3 Asymmetric Wide 7,830 7,860 85 85 1-0-2 1-0-2 EWNA_C3540__.IES EWNA_C3550__.IES
D3 Asymmetric Wide 9,620 9,650 104 104 2-0-2 2-0-2 EWNA_D3540__.IES EWNA_D3550__.IES
E3 Asymmetric Wide 11,320 11,360 123 123 2-0-2 2-0-2 EWNA_E3540__.IES EWNA_E3550__.IES
F3 Asymmetric Wide 13,450 13,500 148 148 2-0-2 2-0-2 EWNA_F3540__.IES EWNA_F3550__.IES
A2 Asymmetric Narrow 3,940 3,960 46 46 1-0-1 1-0-1 EWNA_A2540__-120-277V.IES EWNA_A2550__-120-277V.IES
B2 Asymmetric Narrow 5,820 5,850 65 65 1-0-1 1-0-1 EWNA_B2540__-120-277V.IES EWNA_B2550__-120-277V.IES
C2 Asymmetric Narrow 7,580 7,620 85 85 2-0-2 2-0-2 EWNA_C2540__.IES EWNA_C2550__.IES
D2 Asymmetric Narrow 9,310 9,350 104 104 2-0-2 2-0-2 EWNA_D2540__.IES EWNA_D2550__.IES
E2 Asymmetric Narrow 10,960 11,010 123 123 2-0-2 2-0-2 EWNA_E2540__.IES EWNA_E2550__.IES
F2 Asymmetric Narrow 13,020 13,080 148 148 2-0-2 2-0-2 EWNA_F2540__.IES EWNA_F2550__.IES
VOLTAGE
0 = 120-277
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
H = 347-480V
D = 347
Specify single
*
voltage only
if fuse option is
selected.
OPTICAL
CODE
*
*
*
*
*
*
TYPICAL INITIAL
LUMENS
4000K 120-277V
5000K
DRIVE
CURRENT
5 = 525mA
TYPICAL SYSTEM
WAT TAG E
LED COLOR
TEMP
40 = 4000K
50 = 5000K
347-480V
PE FUNCTION
1 = None
2 = PE Rec.
3 = Internal PE (Button PE)
4 = PE Rec. with Shorting cap
5 = PE Rec. with Contro
A = ANSI C136.41 7-pin PE
Receptacle
D = ANSI C136.41 7-pin PE
Receptacle with Shorting Cap
Only available with discrete
*
voltages. Not available with
voltage options 0, H or 5.
PE control not available for 347-
**
480V. Must be a discrete voltage
(347V or 480V).
When ordering PE function
†
socket A or D, a dimming driver
must also be ordered under the
“OPTIONS” column.
Order Dimming/Control PE as
#
a separate item.
BUG RATINGS*
4000K 5000K
†#
N = None Required
*
l
**
MOUNTING
ARM
COLOR
BLCK = Black
DKBZ = Dark Bronze
Contact manufacturer
for other colors.
†#
4000K 5000K
IES FILE NUMBER
OPTIONS
D = Dimming
(0-10 Volt Input) †
F = Fusing
R = 10kV Enhanced
Surge Protection *
H = Motion Sensor
Dimming leads will be
†
provided through the
back of the arm, unless
specified with A or D
PE Function.
R & H options can not
*
be purchased together.
When ordering Motion
**
Sensing Option H - “A” or
“B” Mounting Arm must be
selected. Fixture power
increase of 1W expected
with sensor use.
Dimming is standard
#
with
not also select D option.
Not compatible with PE
options A, or D.
** #
H option code. Do
Photometrics
EWNA Type IV - Asymmetric Forward (F4)
12,380 Lumens, 5000K (EWNA_F4550__.IES)
Grid Distance in Units
of Mounting Height at 30’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 45°
Vertical plane through horizontal angle of 72.5°
EWNA Type III - Asymmetric Wide (F3)
13,500 Lumens, 5000K (EWNA_F3550__.IES)
EWNA Type IV - Asymmetric Forward (A4)
3,750 Lumens, 5000K (EWNA_A4550__-120-277V.IES)
Grid Distance in Units
of Mounting Height at 15’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 45°
Vertical plane through horizontal angle of 72.5°
EWNA Type III - Asymmetric Wide (A3)
4,090 Lumens, 5000K (EWNA_A3550__-120-277V.IES)
Grid Distance in Units
of Mounting Height at 30’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 20°
Vertical plane through horizontal angle of 52.5°
EWNA Type II - Asymmetric Narrow (F2)
13,080 Lumens, 5000K (EWNA_F2550__.IES)
Distance in Units
of Mounting Height at 30’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 65°
Vertical plane through horizontal angle of 60°
Grid Distance in Units
of Mounting Height at 15’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 20°
Vertical plane through horizontal angle of 52.5
EWNA Type II - Asymmetric Narrow (A2)
3,960 Lumens, 5000K (EWNA_A2550__-120-277V.IES)
Grid Distance in Units
of Mounting Height at 15’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 65°
Vertical plane through horizontal angle of 60°
Product Dimensions
Isometric View
Front View
Top View
16.6 in.
(422 mm)
8.1 in.
(206 mm)
Side View
6.0 in.
(151 mm)
for use with 4.000 in. (102 mm)
.188 in. (5 mm) DIA
Octagon Box (4 places)
• Approximate Net Weight: 17 lbs (7.71 kgs)
• Effective Projected Area (EPA): 0.42 sq ft max (0.04 sq. m)
DATA
16.8 in.
(426 mm)
Back View
4.4 in.
(112 mm)
2.9 in.
(72 mm)
.188 in. (5 mm) DIA
for use with 3.250 in. (83 mm)
Octagon Box (4 places)
H-Motion Sensing Option:
• Intended for mounting applications between 8-25ft.
• Provides a coverage area radius for walking motion of 15-20ft (4.57-6.10m).
• Provides 180° of coverage (~180° is blocked by the wall).
• Delivered factory setting of 50% dimmed light output with no occupancy.
• May be reprogrammed using additional remote programmer.
Contact manufacturer for part details.
Sensor Pattern:
Sensing Pattern Wall Pack Fixture
8 – 25 ft.
Street Side
40’
30’
20’
10’
10’40’ 20’30’ 30’20’ 40’10’
Vehicles
Pedestrians
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2015 GE.
OLP3079 (Rev 02/06/15)
Loading...