Installation Instruction - 0uick Reference Guide
For the complete and detailed installation instructions as well as all safety concerns and warnings, please refer to the installation instructions manual.
Styrofoam block &
owner's manual
Dele la vuelta para instrucciones en espa5ol
Circles or ovals are color matched
between pictures to help show
location on product
Phillips Head Slip Joint Level
Screwdriver or 1/4" Pliers
Nut Driver
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
malfunction or breakdown, grounding should
reduce the risk of electric shock by providing a
path of least resistance for electric current.This
appliance is equipped with a cord having an
equipment-greunding conductor and a grounding
plug.The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING - Improper connection of
equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician
or serviceman ifyou are in doubt as to whether the
appliance is properly grounded.
Avoid a
Repair!
Avoid a
Repair!
Fill hoses
and parts
bag
Drain
hose
_nstaH screens.
(Screens
should be
brand new.
Replace
them if
they are old
or worn).
Use pliers to
tighten 1/2
turn beyond
hand=tight
Remove rod by pulling on
yellow plastic handle
Avoid a
Repair!
Use cable tie
LESS
THAN I :
3_U_U_I" ................................"p
Avoid a
Repair[
Avoid a
Repair!
left to right
Avoid a
Repair[
Avoid a
Repair!
front legs
Usi screwdriver
Install washers. (Washers should
be brand new. Replace them if
they are old or worn). Use pliers
to tighten 1/2 turn beyond
hand-tight
Avoid a
Repair!
Congratulations! Yourinstallationissuccessfulandcomplete.
RefertoyourOwner'sManualfor operationinstructions=
Tilt washer
forward 4 to 6
inches and
then set it back
down - rear legs
will self-align
Avoid a
Repair[