GE EasyCam Pro Instruction Manual
1
For technical support, contact Jasco
Products Company at 1-800-654-8483
or www.jascoproducts.com
98669
EasyCam Pro™
2
Table of Contents
1 How To Install and Use The PC Camera.................................................... 3
1.1
Use Installer to install camera driver................................................................... 3
1.2 How to Use Your PC Camera.............................................................3
1.3 Special Effects and Face Tracking..................................................... 4
1.4 Anti-Flicker Setting................................................................................ 7
2 Getting Started With MediaImpression......................................................9
3 Getting Started with MSN® Messenger....................................................14
4 Minimum System Requirements................................................................ 14
5. Two Year Limited Warranty .……………………………….……………15
6. FCC Statement ……….……...……………………………….……………15
USB PC Camera
User’s Manual
3
1 How To Install and Use The PC Camera
There are two ways to install Camera Driver:
1.1 Use Installer to install camera driver
Don’t connect the camera to your computer yet!
1.1.1 Install Driver
Insert the CD into your CD-ROM drive; the installer screen will automatically come
up. Click the "Install Device Driver" button to start installing.
Note #1: If the installer screen does not come up automatically, click Start,then Run and
execute the file “launch.exe” on the CD to start theinstaller program.
1.2 How to Use Your PC Camera
1.2.1 Plug Webcam’s cable to the USB port on your computer.
1.2.2 Start MediaImpression
(1)Select “WebCam”.
(2)Select “Make Movie”
4
1.3 Special Effects and Face Tracking
1.3.1 Activate your Webcam and open the Property page.
1.3.2 Open the Property page (take ArcSoft MediaImpression as an example):
(1) Close any active video browsing software
(2) Open ArcSoft MediaImpression
(3) Select“WebCam”and the following figure appears:
(4) Click “WebCam” Settings” to open the Property page for adjustment.
5
1.3.3 Select the “Effects_Frame” page to add special effects.
Loading...