GE EASB Data Sheet

GE
Lighting
Evolve
Scalable Area Light (EASB)
LED Area Light
imagination at work
Product Features
The next evolution of the GE Evolve™ LED Area Light continues to deliver outstanding features, while adding greater flexibility, style and scalability. This latest design offers higher lumen outputs and provides photometric combinations with high efficacy, providing the ability to meet even a wider range of area lighting needs. Additionally, the new EASB Evolve Luminaire comes with a specially designed auto dealership optic for exceptional illuminance on the dealership’s front row. Optional programmable motion sensing for Title 24 compliance is available.
Applications
• Site, area, and general lighting applications utilizing advanced LED optical system providing high uniformity, excellent vertical light distribution, reduced offsite visibility, reduced on-site glare and effective security light levels.
• Ideal for small to large retailers, commercial to medical properties, and big box retailers.
Housing
• Die-cast aluminum housing.
• Slim architectural design incorporates an integral heat sink and light engine, ensuring maximum heat transfer, long LED life, and a reduced Effective Projected Area (EPA).
• Meets 2G vibration standards per ANSI C136.31-2010. For 3G rating contact manufacturer.
LED & Optical Assembly
• Structured LED arrays for optimized area light photometric distribution.
• Evolve light engine with directional reflectors designed to optimize application efficiency and minimize glare.
• Utilizes high brightness LEDs, 70 CRI at 4000K and 5000K typical.
Lumen Maintenance
• System rating is L85 at 50,000 hours. Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 50,000 hours.
Ratings
listed, suitable for wet locations.
listed with option code “J” SKUs.
• IP65 rated optical enclosure per ANSI C136.25-2009.
• Temperature rated at –40° to 50°C (–40° to 35°C for 412W fixtures). Delayed start may be experienced below -35° C.
• Upward Light Output Ratio (ULOR) = 0.
• Title 24 compliant with “H” motion sensor option.
• Compliant with the material restriction requirements of RoHS.
Mounting
Option A
• 10-inch (254mm) mounting arm for square pole prewired with 24-inch (610mm) leads.
Option B
• 10-inch (254mm) mounting arm for round pole prewired with 24-inch (610mm) leads.
Option C
• Slipfitter mounting for 2 3/8-inch (60mm) O.D. pipe prewired with 24-inch (610mm) leads.
Option S
• Knuckle Slipfitter mounting for 2.3-3” O.D. pipe, pre-wired with 24-inch (610mm) leads.
Finish
• Corrosion resistant polyester powder painted, minimum 2.0 mil. thickness.
• Standard colors: Black & Dark Bronze.
RAL & custom colors available.
Electrical
• 120-277 volt and 347-480 volt available.
• System power factor is >90% and THD <20%.*
• Class “A” sound rating.
• Photo electric sensors (PE) available for all voltages.
• GE dimmable PE socket is available making the unit “adaptive controls ready.” Contact manufacturer for details.
• Surge Protection Options: For 120-277VAC and 347-480VAC per IEEE/ANSI C136.2-2014. – 6kV/3kA “Basic” surge protection, standard. – 10kV/5kA “Enhanced” surge protection available
with R option.
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
Ordering Number Logic
Evolve™ LED Scalable Area Light (EASB)
E A S B _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
DISTRIBUTION
* * * * *
*
OPTICAL
ORIENTATION
CODE
F = Front L = Left R = Right N = Not
Applicable
Front (F)
Right (R)
Light pattern thrown in direction specified in relation to Pole and Fixture.
TYPICAL INITIAL
LUMENS
4000K 120-277V
PROD. ID PHOTOMETRIC
B =
E = Evolve
A = Area
S = Scalable
OPTICAL
CODE
TYPE V
TYPE IV
TYPE IIITYPE II
Photometric Series
D5 Symmetric Medium 10,600 10,900 126 126 N 4 0 2 4 0 2 456840 456884 E5 Symmetric Medium 12,300 12,700 145 145 N 4 0 2 4 0 2 456841 456885 F5 Symmetric Medium 14,000 14,400 171 171 N 4 0 2 4 0 2 456842 456886 G5 Symmetric Medium 17,400 18,000 211 211 N 4 0 2 4 0 2 456843 456887 H5 Symmetric Medium 20,800 21,400 249 249 N 4 0 2 5 0 3 456844 456888 J5 Symmetric Medium 24,900 26,000 301 301 N 5 0 3 5 0 3 456845 456889 K5 Symmetric Medium 30,600 32,000 412 412 N 5 0 3 5 0 3 456846 456890 N5 Symmetric Short 11,600 11,900 126 126 N 3 0 1 3 0 1 456847 456891 P5 Symmetric Short 13,400 13,800 145 145 N 3 0 2 3 0 2 456848 456892 Q5 Symmetric Short 15,300 15,800 171 171 N 3 0 2 3 0 2 456849 456893 R5 Symmetric Short 19,000 19,600 211 211 N 4 0 2 4 0 2 456850 456894 S5 Symmetric Short 22,700 23,400 249 249 N 4 0 2 4 0 2 456851 456895 T5 Symmetric Short 27,400 28,400 301 301 N 4 0 2 5 0 2 456852 456896 U5 Symmetric Short 34,600 35,600 412 412 N 5 0 3 5 0 3 456853 456897 A4 Asymmetric Forward 5,500 5,600 67 74 F, L, R 1 0 2 1 0 2 456854* 456898* B4 Asymmetric Forward 7,100 7,300 86 86 F, L, R 1 0 2 1 0 2 456855 456899 C4 Asymmetric Forward 8,800 9,100 106 106 F, L, R 1 0 2 1 0 2 456856 456900 D4 Asymmetric Forward 10,600 10,900 126 126 F, L, R 2 0 2 2 0 2 456857 456901 E4 Asymmetric Forward 12,900 13,300 152 152 F, L, R 2 0 3 2 0 3 456858 456902 F4 Asymmetric Forward 14,000 14,400 171 171 F, L, R 2 0 3 2 0 3 456859 456903 G4 Asymmetric Forward 17,400 18,000 211 211 F, L, R 2 0 3 2 0 4 456860 456904 H4 Asymmetric Forward 20,800 21,400 249 249 F, L, R 3 0 4 3 0 4 456861 456905 J4 Asymmetric Forward 25,200 26,000 301 301 F, L, R 3 0 4 3 0 4 456862 456906
K4 Asymmetric Forward 31,700 33,000 412 412 F, L, R 3 0 5 3 0 5 456863 456907 A3 Asymmetric Wide 6,000 6,100 67 74 F, L, R 1 0 1 1 0 1 456864* 456908* B3 Asymmetric Wide 7,700 7,900 86 86 F, L, R 1 0 2 1 0 2 456865 456909 C3 Asymmetric Wide 9,700 9,900 106 106 F, L, R 2 0 2 2 0 2 456866 456910 D3 Asymmetric Wide 11,600 11,900 126 126 F, L, R 2 0 2 2 0 2 456867 456911 E3 Asymmetric Wide 14,100 14,500 152 152 F, L, R 2 0 2 2 0 2 456868 456912 F3 Asymmetric Wide 15,300 15,800 171 171 F, L, R 2 0 2 2 0 2 456869 456913 G3 Asymmetric Wide 19,000 19,600 211 211 F, L, R 2 0 2 2 0 2 456870 456914 H3 Asymmetric Wide 22,700 23,400 249 249 F, L, R 2 0 3 2 0 3 456871 456915 J3 Asymmetric Wide 27,400 28,400 301 301 F, L, R 3 0 3 3 0 3 456872 456916 K3 Asymmetric Wide 34,600 36,000 412 412 F, L, R 3 0 4 3 0 4 456873 456917 A2 Asymmetric Narrow 5,800 5,900 67 74 F, L, R 1 0 1 1 0 1 456874* 456918* B2 Asymmetric Narrow 7,500 7,700 86 86 F, L, R 2 0 2 2 0 2 456875 456919 C2 Asymmetric Narrow 9,300 9,600 106 106 F, L, R 2 0 2 2 0 2 456876 456920 D2 Asymmetric Narrow 11,100 11,400 126 126 F, L, R 2 0 2 2 0 2 456877 456921 E2 Asymmetric Narrow 13,600 13,900 152 152 F, L, R 2 0 2 3 0 3 456878 456922 F2 Asymmetric Narrow 14,800 15,200 171 171 F, L, R 3 0 3 3 0 3 456879 456923 G2 Asymmetric Narrow 18,300 18,900 211 211 F, L, R 3 0 3 3 0 3 456880 456924 H2 Asymmetric Narrow 21,900 22,600 249 249 F, L, R 3 0 3 3 0 3 456881 456925 J2 Asymmetric Narrow 26,500 27,400 301 301 F, L, R 3 0 3 3 0 3 456882 456926 K2 Asymmetric Narrow 33,300 34,700 412 412 F, L, R 3 0 4 4 0 4 456883 456927
Asymmetric 100° Wide Auto 37,200 38,800 412 412 F, L, R 4 0 3 4 0 3 456938 456928
KA
VOLTAGE
0 = 120 - 277 1 = 120 2 = 208 3 = 240 4 = 277 5 = 480 D = 347 H = 347-480
* Specify single
voltage if fuse option is selected.
TYPE
†Rating values for B and G are based on rated lumens and may vary due to flux tolerances. *Contact Manufacturer for 347-480v IES file numbers.
CURRENT
5 = 525mA
(<412W only) 7 = 700mA (412W only)
Pole
Pole
5000K
DRIVE
LED COLOR
TEMP
40 = 4000K 50 = 5000K
Pole
Left (L)
Pole
Not Applicable
(N)
TYPICAL SYSTEM
WAT TAG E
347-480V B U G B
PE FUNCTION
1 = None 2 = PE Rec. 4 = PE Rec. with
Shorting Cap 5 = PE Rec. with Control
**
A = ANSI C136.41 7-pin PE Receptacle D = ANSI C136.41 7-pin PE Receptacle with Shorting Cap
PE control not
**
available for 347­ 480V. Must be a discrete voltage (347V or 480V).
When ordering PE
function socket A or D, a dimming driver must also be ordered under the “OPTIONS” column.
Order Dimming/
#
Control PE as a separate item.
DISTRIBUTION
ORIENTATION
AVAILABLE
MOUNTING
A = 10” Arm for
Square Pole supplied with leads B = 10” Arm for Round Pole supplied with leads C = EXT Slip-fitter 2” Pipe (2.378 in. OD) supplied with leads
†#
S = Knuckle Slipfitter for 2.3in. - 3.0in. OD Tenon. 0-45° vertical aiming angles
†#
achievable.
ARM
BUG RATINGS*
4000K 5000K
COLOR
BLCK = Black DKBZ = Dark Bronze
Contact manufacturer for other colors.
OPTIONS
C = IEC
Dimming
D = (0-10 Volt Input) (For 120-277V)
Dimming
D2 = (0-10 Volt Input) (For 347-480V)
F = Fusing H = Motion Sensor J = cUL/Canada R = 10kV Extra Surge
Protection XXX = Special Options
Dimming leads will be
provided through the back of the arm, unless specified with A or D PE Function.
When ordering Motion
**
Sensing Option H - “A” or “B” Mounting Arm must be selected. Fixture power increase of 1W expected with sensor use.
Dimming is standard
#
with H option code. Do not also select D or D2 option.
compatible with PE
Not receptacle
options A, or D.
IES FILE NUMBER
G
U
4000K 5000K
**#
Photometrics
EASB Type V - Symmetric Medium (K5)
32,000 Lumens, 5000K (GE456890.ies)
.5
.2
.1
EASB Type V - Symmetric Short (U5)
35,600 Lumens, 5000K (GE456897.ies)
11792 13023
8844 9767
5896 6511
2948 3256
1
2
.2
.1
.5
2
1
Grid Distance in Units
of Mounting Height at 40’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
Vertical plane through horizontal angle of 72.5°
EASB Type IV - Asymmetric Forward (K4)
33,000 Lumens, 5000K (GE456907.ies)
.1
.5
.2
Grid Distance in Units of
Mounting Height at 40’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 45°
Vertical plane through horizontal angle of 72.5°
EASB Type III - Asymmetric Wide (K3)
36,000 Lumens, 5000K (GE456917.ies)
.2
.5
.1
of maximum candlepower at 45°
24220
18165
12110
6055
1
26735 10768
20052 8076
13368 5384
6684 2692
Grid Distance in Units of
Mounting Height at 40’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 20°
Vertical plane through horizontal angle of 52.5°
EASB Type IV - Asymmetric Forward (E4)
13,300 Lumens, 5000K (GE456902.ies)
9761
7321
2
Grid Distance in Units of
Mounting Height at 30’ Initial
Footcandle Values at Grade
.1
.5
.2
Vertical plane through horizontal angle
of maximum candlepower at 45°
Vertical plane through horizontal angle of 72.5°
4881
2440
1
EASB Type III - Asymmetric Wide (E3) 14,500 Lumens, 5000K (GE456912.ies)
2 2
.5
.1
.2
Grid Distance in Units of
Mounting Height at 40’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
Vertical plane through horizontal angle of 52.5°
EASB Type II - Asymmetric Narrow (K2)
34,700 Lumens, 5000K (GE456927.ies)
.1
.2
.5
Grid Distance in Units of
Mounting Height at 40’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
Vertical plane through horizontal angle of 60°
1 1
of maximum candlepower at 20°
19803 7932
14852 5949
9901 3966
2 2
4951 1983
1 1
of maximum candlepower at 65°
Grid Distance in Units of
Mounting Height at 30’ Initial
Footcandle Values at Grade
EASB Type II - Asymmetric Narrow (E2)
13,900 Lumens, 5000K (GE456922.ies)
.1
.2
.5
Grid Distance in Units of
Mounting Height at 30’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 20°
Vertical plane through horizontal angle of 52.5°
Vertical plane through horizontal angle
of maximum candlepower at 65°
Vertical plane through horizontal angle of 60°
34.5 in.
Photometrics
EASB Type II - Assymetric Auto (KA)
38,800 Lumens, 5000K (GE456928.ies)
.5
.1
.2
Grid Distance in Units
of Mounting Height at 40’ Initial
Footcandle Values at Grade
Vertical plane through horizontal angle
of maximum candlepower at 0°
Vertical plane through horizontal angle of 180°
Product Dimensions
10” Arm For Square Pole Mount (Option A)
13774
10330
6887
3443
2
1
10.9 in.
[277 mm]
[872 mm]
1.711 in. [43 mm]
16.9 in.
[430 mm]
TOP VIEW
0.438 in. DIA. [11 mm DIA.]
2 in.
[51 mm]
1.312 in. [33 mm]
4.392 in.
[112 mm]
8.5 in.
[217 mm]
4.4 in.
[111 mm]
• Approximate net weight: 43-47 lbs (19.50 - 21.32 kgs) Contact manufacturer for specific configuration weight.
• Effective Projected Area (EPA) with 10” Mounting Arm: 0.97 sq ft max (0.09 sq m)
DATA
SQUARE POLE ADAPTOR
FITS ROUND POLE ONLY
3.5 in. - 4.5 in. OD POLE
(89 mm OD - 115 mm OD)
R8.680 in.
[R220 mm]
2.5 in.
[63 mm]
16.0 in.
[406 mm]
4.7 in.
[119 mm]
FRONT VIEWSIDE VIEWBACK VIEW
Product Dimensions
28.6 in.
10” Arm For Round Pole Mount (Option B)
10.5 in.
[266 mm]
34.1 in.
[867 mm]
5.438 in.
4.812 in.
[138 mm]
[122 mm]
DATA
Slipfitter Arm Mount (Option C)
16.9 in.
[430 mm]
TOP VIEW
FITS ROUND POLE ONLY
0.625 in. [16 mm]
2.953 in. [75 mm]
0.438 in. DIA
[11 mm DIA..]
6.375 in.
[162 mm]
8.4 in.
[213 mm]
4.4 in.
[111 mm]
• Approximate net weight: 43-47 lbs (19.50 - 21.32 kgs) Contact manufacturer for specific configuration weight.
• Effective Projected Area (EPA) with 10” Mounting Arm: 0.97 sq ft max (0.09 sq m)
5.0 in.
[126 mm]
3.5 in. - 4.5 in. OD POLE
(89 mm OD - 115 mm OD)
R8.680 in.
[R220 mm]
[726 mm]
2.5 in.
[63 mm]
16.0 in.
[406 mm]
4.7 in.
[119 mm]
FRONT VIEWSIDE VIEWBACK VIEW
2 in. Nominal PIPE ONLY
(2.375 in. OD)
[60 mm OD]
[125 mm]
• Approximate net weight: 41-45 lbs (18.60 - 20.41 kgs) Contact manufacturer for specific configuration weight.
• Effective Projected Area (EPA) with Slipfitter: 0.47 sq ft max (0.04 sq m)
DATA
4.9 in.
16.9 in.
[430 mm]
TOP VIEW
2 in. Nominal PIPE ONLY
(2.375 in. OD)
[60 mm OD]
R8.680 in. [R220 mm]
2.5 in.
[63 mm]
16.0 in.
[406 mm]
4.7 in.
[119 mm]
FRONT VIEWSIDE VIEWBACK VIEW
Knuckle Arm Mount (Option S)
3.2 in.
[81 mm]
TOP VIEW
26.8 in.
[681 mm]
KNUCKLE SLIPFITTER ARM MOUNT
0° TO 45° AIMING RANGE
3 inch OD (max)
[76 mm OD]
• Approximate net weight: 41-45 lbs (18.60 - 20.41 kgs) Contact manufacturer for specific configuration weight.
• Effective Projected Area (EPA) with fixture mounted at 45° upward: 1.97 sq ft max
DATA
16.9 in.
[430 mm]
2.3 in.
[57 mm]
7.3 in.
[186 mm]
45° max upward aim
R26.9 in.
[R683 mm]
2.5 in.
[63 mm]
16.0 in.
[406 mm]
5.0 in.
[127 mm]
FRONT VIEWSIDE VIEWBACK VIEW
H-Motion Sensing Option:
• Intended for high mounting applications, between 15-45ft (4.57-9.14m).
• Comes standard with 50% dimmed light output with no occupancy, and full power at occupancy.
• Comes standard with photocell function. Note: It is not necessary to also purchase PE receptacle or control.
• Comes standard with a 5 minute occupancy time delay and a 5 minute ramp-down to the 50% dimmed level.
• Must order with decorative mounting arm options “A” or “B”.
• Fixture power increase of 1W expected with sensor use.
Note: Standard options may be reprogrammed in the field. Reprogramming instructions included in product shipment.
Sensor Pattern:
Sensing Pattern Area Fixture 15 - 45 ft.
Street Side
40’
30’
20’
10’
10’40’ 20’30’ 30’20’ 40’10’
10’
20’
30’
40’
Vehicles
Pedestrians
Mounting Information
Mounting Arms for Slipfitter
Order separately with Mounting Option C (External Slipfitter)
SQUARE POLE MOUNTING ARM
3.5 TO 4.5-inch (89 to 114mm) SQUARE
(WILL ALLOW 4 FIXTURES PER POLE @ 90 DEGREES.)
10.500 in.
[267 mm]
ORDER SEPARATELY FROM FIXTURE AS CATALOG NUMBER
SPA-EAMT10BLCK “Black” SPA-EAMT10DKBZ “Dark Bronze”
ROUND POLE MOUNTING ARM
3.5 TO 4.5-inch (89 to 114mm) OD
(WILL ALLOW 4 FIXTURES PER POLE @ 90 DEGREES.)
10.500 in.
[267 mm]
ORDER SEPARATELY FROM FIXTURE AS CATALOG NUMBER
RPA-EAMT10BLCK “Black” RPA-EAMT10DKBZ “Dark Bronze”
Drilling Templates for
Slipfitter Arms & Arm Mount
SQUARE POLE MOUNTING
.312 in. DIA. [8 mm DIA.]
5.250 in.
[133 mm
MIN.]
1.250 in. DIA. [32 mm DIA.]
Hole
ROUND POLE MOUNTING
3.5 TO 4.5-inch (89 to 114mm) OD
.312 in. DIA. [8 mm DIA.]
5.250 in.
[133 mm
MIN.]
1.812 in. [46 mm]
.750 in. DIA.
[19 mm DIA.]
Hole
1.812 in. [46 mm]
round pole mounting arm
.438 in. DIA.
[11 mm DIA.]
2.196 in. [56 mm]
.656 in. [17 mm]
1.312 in. [33 mm]
.438 in. DIA.
[11 mm DIA.]
(2 Places)
2.719 in. [69 mm]
(2 Places)
4.392 in.
[112 mm]
5.438 in.
[138 mm]
Wall Mounting Bracket Adapter Plate
ORDER SEPERATELY FROM FIXTURE AS CATALOG NUMBER
WMB-EAMT06
Other mounting patterns are available for retrofit installations.
Contact manufacturing for other available mounting patterns.
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of the General Electric Company. © 2015 GE.
OLP3071 (Rev 02/27/15)
Loading...