GE EANA Data Sheet

GE

Lighting

™

Evolve

N Series (EANA)

LED Area Light

imagination at work

Product Features

The next generation of the GE Evolve™ LED Area Light is an exciting solution to efficiently illuminate site and
area applications. The smaller-form design of the EANA fixture provides superior illuminance at impressive site ROIs.
The exclusive optical ring design effectively directs the light and produces impressive vertical illuminance and glare
control. Additionally, the Evolve LED Area Light provides significant operating cost benefits over the life of each fixture
with reduced energy consumption and a long rated life that virtually eliminates ongoing maintenance expenses.

Applications

• Site, area, and general lighting applications
utilizing advanced LED optical system providing
high uniformity, excellent vertical light distribution,
reduced offsite visibility, reduced on-site glare and
effective security light levels.

• Obtain a truly optimized and efficient parking space
with dimming and occupancy sensing features.

Housing

• Die-cast aluminum housing.

• Slim architectural design incorporates an integral
heat sink and light engine, ensuring maximum heat
transfer, long LED life, and a reduced Effective
Projected Area (EPA).

• Meets 2G vibration level per ANSI C136.31-2010.

LED & Optical Assembly

• Structured LED arrays for optimized area light
photometric distribution.

• Evolve light engine with directional reflectors designed
to optimize application efficiency and minimize glare.

• Utilizes high brightness LEDs, 70 CRI at 4000K
and 5000K typical.

Lumen Maintenance

• System rating is L85 at 50,000 hours. Contact
manufacturer for Lxx rating (Lumen Depreciation)
beyond 50,000 hours.

Ratings

/

• listed, suitable for wet locations.

• IP66 rated optical enclosure per ANSI C136.25-2009.

• Temperature rated at –40° to 50°C.

• Upward Light Output Ratio (ULOR) = 0.

• Title 24 compliant with “H” motion sensor option.

• Compliant with the material restriction
requirements of RoHS.

Mounting

Option A

• 10-inch (254mm) mounting arm for square pole
prewired with 24-inch (610mm) leads.

Option B

• 10-inch (254mm) mounting arm for round pole
prewired with 24-inch (610mm) leads.

Option C

• Slipfitter mounting for 2 3/8-inch (60mm) O.D. pipe
prewired with 24-inch (610mm) leads.

Finish

• Corrosion resistant polyester powder painted,
minimum 2.0 mil. thickness.

• Standard colors: Black & Dark Bronze.

•

RAL & custom colors available.

Electrical

• 120-277 volt and 347-480 volt available.

• System power factor is >90% and THD <20%.

• Photo electric sensors (PE) available for all voltages.

• GE dimmable PE socket is available making the
unit “adaptive controls ready.” Contact manufacturer
for details.

• Dimming:

- Wired 0-10V continuous dimming with “D”
option code

- Stand-alone motion sensor based dimming using
“H” option code

• Surge Protection Options:
For 120-277VAC and 347-480VAC per IEEE/ANSI
C136.2-2014.
– 6kV/3kA “Basic” surge protection, standard.
– 10kV/5kA “Enhanced” surge protection available
with “R” option code.

Ordering Number Logic

Evolve™ LED Area Light N Series (EANA)

E A N A 5
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

PROD. ID

E = Evolve

A = Area Light

N =

Housing

Series

OPTICAL

CODE

TYPE IVTYPE IIITYPE II

*Rating values for B and G are based on rated lumens and may vary due to flux tolerances.

PHOTOMETRIC

SERIES

A = Photometric

Series “A”

TYPE

A4 Asymmetric Forward 3,730 3,750 46 46 1 0 1 1 0 1 EANA_A4540__-120-277V.IES EANA_A4550__-120-277V.IES
B4 Asymmetric Forward 5,510 5,540 65 65 1 0 2 1 0 2 EANA_B4540__-120-277V.IES EANA_B4550__-120-277V.IES
C4 Asymmetric Forward 7,180 7,210 85 85 1 0 2 1 0 2 EANA_C4540__.IES EANA_C4550__.IES
D4 Asymmetric Forward 8,810 8,850 104 104 1 0 2 1 0 2 EANA_D4540__.IES EANA_D4550__.IES
E4 Asymmetric Forward 10,370 10,410 123 123 2 0 2 2 0 2 EANA_E4540__.IES E ANA_E4550__.IES
F4 Asymmetric Forward 12,320 12,380 148 148 2 0 3 2 0 3 E ANA_F4540__.IES E ANA_F4550__.IES
A3 Asymmetric Wide 4,070 4,090 46 46 1 0 1 1 0 1 EANA_A3540__-120-277V.IES EANA_A3550__-120-277V.IES
B3 Asymmetric Wide 6,010 6,040 65 65 1 0 1 1 0 1 EANA_B3540__-120-277V.IES EANA_B3550__-120-277V.IES
C3 Asymmetric Wide 7,830 7,860 85 85 1 0 2 1 0 2 EANA_C3540__.IES EANA_C3550__.IES
D3 Asymmetric Wide 9,620 9,650 104 104 2 0 2 2 0 2 EANA_D3540__.IES EANA_D3550__.IES
E3 Asymmetric Wide 11,320 11,360 123 123 2 0 2 2 0 2 EANA_E3540__.IES E ANA_E3550__.IES
F3 Asymmetric Wide 13,450 13,500 148 148 2 0 2 2 0 2 EANA_F3540__.IES E ANA_F3550__.IES
A2 Asymmetric Narrow 3,940 3,960 46 46 1 0 1 1 0 1 EANA_A2540__-120-277V.IES EANA_A2550__-120-277V.IES
B2 Asymmetric Narrow 5,820 5,850 65 65 1 0 1 1 0 1 EANA_B2540__-120-277V.IES EANA_B2550__-120-277V.IES
C2 Asymmetric Narrow 7,580 7,620 85 85 2 0 2 2 0 2 EANA_C2540__.IES EANA_C2550__.IES
D2 Asymmetric Narrow 9,310 9,350 104 104 2 0 2 2 0 2 EANA_D2540__.IES EANA_D2550__.IES
E2 Asymmetric Narrow 10,960 11,010 123 123 2 0 2 2 0 2 EANA_E2540__.IES E ANA_E2550__.IES
F2 Asymmetric Narrow 13,020 13,080 148 148 2 0 2 2 0 2 EANA_F2540__.IES EANA_F2550__.IES

VOLTAGE

0 = 120-277
1 = 120
2 = 240
4 = 277
5 = 480
H = 347-480V
D = 347

Specify single

*

voltage only
if fuse option
is selected.

OPTICAL

CODE

*
*
*
*

*

TYPICAL INITIAL

LUMENS

4000K 120-277V

5000K

DRIVE

CURRENT

5 = 525mA

TYPICAL SYSTEM

WAT TAGE

LED COLOR

TEMP

40 = 4000K
50 = 5000K

347-480V B U G B

PE FUNCTION

1 = None
2 = PE Rec.
4 = PE Rec. with

Shorting cap
5 = PE Rec. with
Control
A = ANSI C136.41
7-pin PE
Receptacle
D = ANSI C136.41
7-pin PE
Receptacle with
Shorting Cap

**

available for
347-480V. Must be
a discrete voltage
(347V or 480V).

†

function socket A or D,
a dimming driver must
also be ordered under
the “OPTIONS” column.

#

PE as a separate item.

**

†#

†#

PE control not

When ordering PE

Order Dimming/Control

BUG RATINGS*

4000K 5000K

MOUNTING

ARM

A = 10” Arm for Square

Pole, supplied with
leads

B = 10” Arm for Round
Pole, supplied with
leads

C = EXT Slipfitter 2” Pipe
(2.378 in. OD)
supplied with leads

G

U

COLOR

BLCK = Black
DKBZ = Dark Bronze

Contact manufacturer
for other colors.

4000K 5000K

D = Dimming

(0-10 Volt Input) †

F = Fusing
R = 10kV Enhanced

Surge Protection

H = Motion Sensor
XXX = Special Options

Dimming leads will

†

be provided through
the back of the arm,
unless specified with
A or D PE Function.

May only be selected

*

in conjunction with A
or B Mounting Arm.

Dimming is standard

#

with H option code.
Do not also select D
option. Not compatible
with PE receptacle
options A, or D.

IES FILE NUMBER

OPTIONS

*#