GE DXR250P Brochure
GE
Sensing & Inspection Technologies
DXR250P
Direct Radiography
Designed for eld use, the DXR250P provides a compact
digital radiography solution that is ready to be deployed in
some of the most challenging environments. The portability
of the DXR250P allows for use in applications that have
been previously limited to computed and lm radiography.
DXR250P enables shorter exposure times and instant image
review, reducing the need for re-shooting of images and
leading to overall productivity for users.
Features and Benets
• Highly efcient CsI scintillator requiring minimal dose to
produce premium images
• Lightweight, thin packaging allowing for maximum
accessibility
• Detachable quick disconnect tether cable for easy set-up
• Ruggedized covering and carrying case for eld
deployment (optional)
Applications
• Erosion corrosion
• Flow assisted corrosion
• On-wing
• Foreign object detection
Al-6061
Ti-6Al4V
Detector Characterization Charts
The detector characterization charts provided on the left
are completed in accordance to ASTM E2597-07 Standard
Practice for the Manufacturing Characterization of Digital
Detector Arrays. This standard allows for the direct
comparison of DDAs by ensuring data is collected and
reported in a consistent and specied manner. The standard
also enables guidance for the appropriate pairings of
detectors with applications.
Pixels are identied as bad per one or more of the seven
denitions described in the ASTM E2597-07 document.
The pixels marked as bad will be corrected through GE’s
software utilizing data collected from good neighborhood
pixels.
Inconel 718
Technical Specifications
Detector Specications
Flat Panel Type Amorphous Silicon
Scintillator Material CsI
Active Area (approx.) 410 x 410 mm (16 x 16 in)
Image Format 2048 x 2048
Pixel Pitch 200µm
A/D Conversion 14 bits
Min Exposure Time 130 ms
Interface Gigabit Ethernet
Dynamic Range 10,000:1
Dimensions 585 x 465 x 27mm
Weight 6 kg (13 lb)
Operating Temperature 10° to 35° C (50° to 95° F)
Operating Humidity 10-90% non-condensing
Power Supply
Voltage 100-240V, 50-60Hz
UT Output Connector 163 x 287 x 56 mm (6 x 11 x 2 in)
Weight 3 kg (7 lb)
www.gesensinginspection.com
GEIT-40048EN (01/10)
© 2010 General Electric Company. All Rights Reserved. Specications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not afliated with GE.
Loading...