GE DXR250 Brochure

GE

Measurement & Control Solutions

DXR250

Direct Radiography

The DXR250 provides a large active area, enabling easy

lm replacement. The DXR250 utilizes a CsI scintillator
with optimized noise and resolution parameters to provide

premium imaging over a wide range of parts and material
types. GE’s Inspection Technologies business detectors
incorporate a temperature controller, allowing for longer

calibration intervals and quick consistent images.

Features and Benets

• Large imaging area

• CsI scintillator for premium image quality

• Temperature controller for stable offsets over longer

periods, enabling more consistent imaging and fewer
calibrations

Applications

• Film replacement

• Pipe manufacturing

• Large castings

• Integrated manipulation systems

Al-6061

Ti-6Al4V

Detector Characterization Charts

The detector characterization charts provided on the left
are completed in accordance to ASTM E2597-07 Standard
Practice for the Manufacturing Characterization of Digital
Detector Arrays. This standard allows for the direct
comparison of DDAs by ensuring data is collected and
reported in a consistent and specied manner. The standard

also enables guidance for the appropriate pairings of

detectors with applications.

Pixels are identied as bad per one or more of the seven
denitions described in the ASTM E2597-07 document.
The pixels marked as bad will be corrected through GE’s
software utilizing data collected from good neighborhood
pixels.

Inconel 718

Technical Specifications

Detector Specications

Flat Panel Type Amorphous Silicon
Scintillator Material CsI
Active Area (approx.) 410 x 410 mm (16 x 16 in)
Image Formate 2048 x 2048
Pixel Pitch 200µm
A/D Conversion 14 bits
Max. Frame Rate 7.5 fps or 3.0 fps
Interface Fiber Optic or Gigabit Ethernet

Dynamic Range 10,000:1
Dimensions 562 x 454 x 52.5mm
Weight 22 kg (49 lb)

Operating Temperature 10° to 35° C (50° to 95° F)
Operating Humidity 10-90% non-condensing

Power Supply

Voltage 100-240V, 50-60Hz
UT Output Connector 163 x 287 x 56 mm (6 x 11 x 2 in)
Weight 3 kg (7 lb)

Temperature Controller

Voltage 100-240V, 50-60Hz
Dimensions 220 x 286 x 382 mm (9 x 11 x 15 in)
Weight 8 kg (19 lb)

www.gesensinginspection.com

GEIT-40047EN (08/10)

© 2010 General Electric Company. All Rights Reserved. Specications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names menti­oned in this document may be trademarks or registered trademarks of their respective companies, which are not afliated with GE.