GE CP9536SJ Specification

CP9536SJ
CP9536SJ, PP9036DJ,
PP7036DJ, JP5036DJ
INSTALLATION ABOVE A WALL OVEN
GE Café
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 5" free area between
the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.
NOTE: 36" Ribbon cooktops are approved for use over select GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/ electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2" minimum flat countertop surface and 25" minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered.
Before installing, consult installation instructions packed with product for current dimensional data.
Series 36" Built-In Knob Control Electric Cooktop
APPROXIMATE COOKING DIMENSIONS
3-1/4" at front of unit and 5-9/16" at conduit location
1-3/4" MIN.
to rear wall
2-1/2" MIN.
Required
To insure accuracy, it is best to make a template when cutting the opening in the counter
INSTALLATION ABOVE A WALL OVEN
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
18-7/8"
36"
Cooktop
33-7/8"
to 34"
20-3/8"
33-3/4"
19-1/8" to
19-1/4"
13" MAX. depth of unprotected
overhead cabinets (when no hood or microwave is installed)
30" MIN. from countertop to unprotected cabinet (when no hood or microwave is installed)
See label next
to nameplate for
MIN. clearance
to wall
Electrical junction box 16" MIN.
below countertop
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
VOLTAGE (60HZ AC) 240V CONNECTED LOAD (MAX.) 10. 8kW
15" MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop
208V
8.1kW
CURRENT DRAW (MAX.) 45.0 A mps 39.0 A mps RECOMMENDED CIRCUIT BREAKER†50 Amps 40 Amps
NOTE: Check local codes for required breaker size.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
ADA
COMPLIANT
Listed by Underwriters Laboratories
Speci fication Revised 6/18
CP9536SJ
GE Café
FEATURES AND BENEFITS Five radiant cooking elements – Cook foods quickly and evenly on this sleek, glass surface
6"/9"/12" Power Boil element – Use different pan sizes on GE's most powerfull 3,600-watt radiant element that produces rapid heat
5"/7"/9" tri-ring element – Use different pan sizes on this single, 3,000-watt flexible element that produces rapid powerful heat
SyncBurners – Control two 7" elements simultaneously to evenly heat large cookware or griddles
Stainless Steel Clad Aluminum Griddle – Achieve even results with this lightweight griddle, tailored to fit GE SyncBurners
Keep Warm setting – Keep food warm with GE’s lowest heat setting or boil water in minutes with this fully functional 6" element
Control lock capability – Protects against unintended activation
Blue LED backlit knobs with beveled black glass surface – Enjoy a premium look with the convenience of knob controls
Series 36" Built-In Knob Control Electric Cooktop
Hot surface indicator lights – Know when elements are too hot to touch with a quick glance
Cooktop “On” indicator light – A light lets you know when an element is active
Model CP9536SJSS – Stainless steel
GUARANTEED FIT Replacing a similar cooktop from GE or another brand? GE cooktops are guaranteed for an exact fit to make replacement easy
Visit geappliances.com for more info
Speci fication Revised 6/18
Loading...