GE
Lighting
™
Evolve
Contemporary Twin Support Post Top (EPTC)
LED Post Top
imagination at work
Product Features
The Evolve™ LED Contemporary Twin Support Post Top (EPTC) offers energy efficiency and quality of light in your choice
of two distinct, modern styles. The advanced LED optical system provides improved horizontal and vertical uniformity,
reduced glare and improved lighting control. GE’s unique optical ring technology effectively aims the light where you
need it, while eliminating the unsightly shadow circles commonly seen under other LED post top fixtures.
The EPTC can yield up to a 60-percent reduction in system energy compared with standard HID systems, depending
on applications. This reliable system operates well in cold temperatures and offers more than 11 years of service life to
reduce maintenance frequency and expense, based on a 50,000 hour life at 12 hours of operation per day (L85 Rating).
Applications
• Roadway, site, area, and general lighting utilizing
advanced LED optical system providing high
uniformity, excellent vertical illuminance, reduced
offsite visibility, and reduced on-site glare.
Housing
• Base: die-cast aluminum housing.
• Top Upper Housing: one-piece spun aluminum,
available in two distinct contemporary designs.
• The upper fixture design incorporates the heat sink
directly into the unit ensuring maximum heat transfer
and long LED life.
• Meets 2G vibration per ANSI C136.31-2001.
For 3G rating contact manufacturer.
LED & Optical Assembly
• Structured LED array for optimized roadway, walkway
and campus photometric distribution.
• Evolve light engine consisting of nested concentric
directional reflectors designed to optimize application
efficiency and minimize glare.
• Utilizes high brightness LEDs, 65 CRI at 4100K typical.
• LM-79 tests and reports are performed in accordance
with IESNA standards.
Mounting
• Post top mounting 3-inch (76mm) OD held in place
with six square head set screws.
Finish
• Corrosion resistant polyester powder painted,
minimum 2.0 mil. thickness.
• Standard colors: Black, Gray and Dark Bronze.
•
RAL & custom colors available.
Electrical
• 120-277 volt and 347-480 volt available.
• System power factor is >90% and THD <20%.
• Class “A” audible sound rating.
• Integral surge protection:
- For 120-277VAC per IEEE/ANSI C62.41.-1991,
4kV/2kA Location Category B2 (120 Events).
- For 347-480VAC per IEEE/ANSI C62.41.-1991,
4kV/2kA Location Category B2 (120 Events).
•
EMI: Title 47 CFR Part 15 Class A.
• Photo Electric Sensors (PE) available for all voltages.
Lumen Maintenance
•
System rating is L85 at 50,000 hours. Contact manufacturer
for L rating (Lumen Depreciation) beyond 50,000 hours.
Ratings
• listed, suitable for wet locations.
• IP 65 rated optical enclosure per ANSI C136.25-2009.
• Temperature rated at –40° to 50°C.