GE AKCQ10DCH Specifications
AKCQ10DCH
Wall Case Dimensions (in inches)
GE® 230/208 Volt Built-in Cool-only Room Air Conditioner
WALL CASE DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: When installing slide-out chassis units in through-the-wall
applications, keep louvers free. Do not restrict air flow areas.
19"
For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
24 1/16"
14 9/16"
B / 6-15P
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
230/208V
15 Amp
Listed by
Underwriters
Laboratories
Specification Created 7/20
AKCQ10DCH
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
15-3/4
26-1/8
Lintel
g
GE® 230/208 Volt Built-in Cool-only Room Air Conditioner
DIMENSIONS (IN INCHES)
INS TA LLATI O N IN F O RMATI O N: A finished opening
of 26-1/8" x 15-3/4" clear of intrusions is required. Keep
clearance of 4" from side walls. Brick veneer or frame
walls should have wood studding surrounding case to
provide firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in lead
expansion shields.
NOTE: Units should be caulked on all four sides of case
to the building exterior to assure building integrity.
WALL CASE FOR TENANT OPTION INSTALLATION
When the air conditioner is offered as a tenant option, this
wall case provides protection against outside elements.
RAB48 – includes wall case, exterior grille,
steel closure panel and two layers of insulation.
STANDARD WALL CASE RAB46
Solid-sided wall case fabricated of galvanized steel
with baked enamel finish. Welded areas are coated with
a sealing compound to help resist rust and corrosion.
Polymer gasket surrounds opening to assure tight weather
seal. Aluminum grille (RAG13) is included. Panels on
interior and between case and grille provide weather
protection prior to installation of chassis. Provide
firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in
lead expansion shields.
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Brick Block and Brick
Frame Construction
Plaster Line
Trim Moldin
Lintel
OUTSIDE INSIDE
16-7/8
(if desired)
Caulking
Drip Rail
Flexible Mounting Position
Lintel
15-3/4
26-1/8
Fill open cells
with mortar
or insulation
For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
Specification Created 7/20
Loading...