GE AJEM12DCH Specification
Premium, Deluxe and Value Model
Wall Case Dimensions (in inches)
AJEM12DCH
GE® 230/208 Volt Built-In Heat/Cool Room Air Conditioner
WALL CASE DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Note: When installing slide-out chassis units in through-thewall applications, keep louvers free. Do not restrict air flow
areas..
15-5/8
Perpendicular
16-7/8
21-13/16
For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
26
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
230/208V
20 Amp
Listed by
Underwriters
Laboratories
Specification Created 7/20
AJEM12DCH
GE® 230/208 Volt Built-In Heat/Cool Room Air Conditioner
WALL CASE DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
INSTALL ATION IN FO R MATION : A finished opening
of 26-1/8" x 15-3/4" clear of intrusions is required. Keep
clearance of 4" from side walls. Brick veneer or frame walls
should have wood studding surrounding case to provide
firm anchoring with screws. Case can be fastened directly
to brick or block walls with screws sunk in lead expansion
shields.
NOTE: Units should be caulked on all four sides of case
to the building exterior to assure building integrity.
TWO WALL CASES FOR TENANT OPTION
INSTALL ATION
When the air conditioner is offered as a tenant option,
these wall cases provide protection against outside
elements.
RAB47 – includes wall case, exterior grille
and steel closure panels.
RAB48 – includes wall case, exterior grille,
steel closure panel and two layers of insulation.
STANDARD WALL CASE RAB46
Solid-sided wall case fabricated of galvanized steel with
baked enamel finish. Welded areas are coated with
a sealing compound to help resist rust and corrosion.
Polymer gasket surrounds opening to assure tight weather
seal. Aluminum grille (RAG13) is included. Panels on
interior and between case and grille provide weather
protection prior to installation of chassis. Provide firm
anchoring with screws. Case can be fastened directly to
brick or block walls with screws sunk in lead expansion
shields.
For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
Specification Created 7/20
Loading...