GE AJCH08AC User Manual

Page 1
AJCH08AC—”J Series” High Mount Cool Unit
Created 1/98
GE Appliances
Note: When installing units in through-the-wall applications. Do not restrict air flow areas.
26
15-5/8
16-7/8
Parallel
115V 15 Amp
R
R
Total capacity and E.E.R. ratings are calculated based on the Association of Home Appliance Manufacturers’ standards.
Listed by Underwriters Laboratories
For answers to your Monogram,®GE Profile Performance Series,™GE Profile,™GE, Hotpoint and RCA appliance questions, call GE Answer Center®service, 800.626.2000.
Page 2
Created 1/98
GE Appliances
AJCH08AC—”J Series High Mount Cool Unit
Fill open cells with mortar or insulation
15-3/4
26-1/8
Lintel
Dimensions (in inches)
Installation Informaion: A finished opening of
26-1/8" x 15-3/4" clear of intrusions is required. Keep clearance of 4" from side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.
Make frame if desired or caulk between case and siding
15-3/4
26-1/8
Frame Construction
Lintel
16-7/8
Drip Rail
Trim Molding (if desired)
Plaster Line
Flexible Mounting Position
R
R
Total capacity and E.E.R. ratings are calculated based on the Association of Home Appliance Manufacturers standards.
Listed by Underwriters Laboratories
For answers to your Monogram,®GE Profile Performance Series,™GE Profile,™GE, Hotpoint and RCA appliance questions, call GE Answer Center®service, 800.626.2000.
Page 3
Created 1/98
GE Appliances
AJCH08AC—”J Series High Mount Cool Unit
Features and Benefits
Decorative Warm Gray-Beige Front
8,000 BTUH, 9.2 E.E.R., 115 Volts
Easy-To-Reach Controls for High Mount Installations
Fan Cycle Switch for Reduced Energy Consumption
Variable Setting Thermostat
2 Cooling/2 Fan Only Speeds
Slide-Out Filter for Easy Cleaning
Exhaust for Air Exchange
Slide-Out Chassis
Chassis OnlyWithout Wall Case and Mounting Kit
Wall CaseOptional Accessory (RAB46/47/48)
Window Mounting KitOptional Accessory
Plug Type–Parallel
Loading...