The award winning Albeo™ ABH-series LED Luminaire utilizes innovative heat-sinking and cutting-edge LED technology
to deliver a wide range of light outputs that replace 250W-1,500W HID and four-to-eight lamp T5/T8 high intensity
fluorescent fixtures in high bay applications. The ABH2-series offers higher efficacy than previous generations and can
be matched with motion, daylight and wireless controls for increased energy savings, lower maintenance costs and
shorter paybacks.
Applications
• Designed to meet recommended luminance and
illuminance requirements for high & low bay lighting
applications in industrial and commercial buildings.
Housing
• Die cast aluminum housing.
• Innovative design accommodates up to 6 LED modules.
• Each LED module is equipped with an upper limit
thermal control to ensure fixture lifetime throughout
the temperature range.
LED & Optical Assembly
• Precision lens system provides optimized illumination
for open floor or racked aisles.
• Field upgradable lens and multiple photometric
distributions of 20, 30, 40, 80 and 120 degrees.
• Utilizes high brightness LEDs, 70 & 80 CRI at
4000K & 5000K typical.
• LM-79, LM-80 tests and reports are performed in
accordance to IESNA standards.
Lumen Maintenance
• System rating is L85 at 50,000 hours. Contact
manufacturer for Lxx rating (Lumen Depreciation)
beyond 50,000 hours.
Mounting
• Chain or Cable mounting ready. 1/2” threaded rod kit,
indirect mount, and 3/4” pendant mount kit optional.
• Cord and plug options offered.
Finish
• White polyester powder coat.
Controls
• Motion and Daylight sensor can be combined
for additional energy savings.
• For wireless controls please consult factory.
Electrical
• 120-277 volt and 347-480 volt available.
• System power factor is >90% and THD <20%.*
• EMI: Title 47 CFR Part 15 Class A.
* System power factor and THD is tested and specified at 120V
input and maximum load conditions .
Warranty
• 5-year limited system warranty standard.
Ratings
• DLC. Listed.
• UL 1598 Suitable for Damp Locations.
/
• UL 8750 LED equipment in Lighting Products.
• Temperature Rated:
T, H Output Models: -35C to +55C (-31F to 131F)
V Output Models: -25C to +55C ( -13F to 131F)
• Projected L70 (15K) > 100,000 Life Hours per IES TM-21.
Industry Awards
Winner of the 2013 Next Generation
Luminaires™ Solid-State Lighting Design
Competition for high and low bay
industrial lighting. Sponsored by the U.S.
Department of Energy (DOE), Illuminating
Engineering Society of North America,
and the International Association of
Lighting Designers.
Winner of the 2013 Architectural
SSL Magazine Product Innovation
Award in the high bay category.
Recognized with third award
in 2 years from Architectural
SSL Magazine.
Ordering Number Logic
Albeo™ High & Low Bay LED Lighting (ABH2)
A B H 2 W
_ _ _ _ - _ - _ - _ - _ _ - _ - _ - _ - _ _ - _ - _ - _ - _
N = None
A = On/off aisle motion
B = On/off 360 motion
C = On/off cold temp aisle
D = On/off cold temp 360
E = Daylight sensor
F = Aisle motion/daylight
G = 360 motion/daylight
H = Pre-wired (no sensor)
If you choose options
below you must choose
control wiring option V or D
J = 0-10V Motion 360
K = 0-10V Motion aisle
L = 0-10V Motion 360 cold
M = 0-10V Motion aisle cold
Note: Please reference Sensor
chart for available sensor types
CONTROL
N = None
D = 0-10V
Daisy Chain
V = 0-10V
Stand alone
LPW (5000K)
WIRING
ST = Standard
22 = ½” Threaded
rod mount kit*
*Rod and nuts
not included
23 = ¾” Pendant
Mount Kit**
**Conduit not
included
UP = Indirect
Mount
41 = Y–Cable/
Hook 5 ft.
42 = Y-Cable/
Hook 10 ft.
43 = Y- Cable/
Hook 15 ft.
44 = Y- Cable/
Hook 20 ft.
61 = Indirect YCable/ Hook 5 ft.
62 = Indirect YCable/ Hook 10 ft.
63 = Indirect YCable/ Hook 15 ft.
64 = Indirect YCable/ Hook 20 ft.
Note: Option 23
can not be used
with 6 module
High Output or
Very High Output
drivers
See Mounting &
Accessories
Note:
IES files located
on GE website
www.gelighting.com
CORDPLUG
K = Knock out
access
A = 6 ft .
18-3 cord
B = 12 ft.
18-3 cord
Consult
factory for
custom cord
lengths.
FINISHOPTIONSMOUNTING
N = None
A = 15A
Straight
Plug
B = 20A
Straight
Plug
C = 15A
Twistlock
Plug
D = 20A
Twistlock
Plug
Consult factory
for custom plugs.
Note: Please
reference
Plug chart for
available
plug types
The Albeo™ ABHG-series optical lens system enables LEDs to provide precise illumination where needed. Lenses are
designed for commercial & industrial applications where mounting height, fixture spacing & light levels help determine lens
selection. The following table outlines lens options and suggested application. Consult factory for specific project layouts.
LENS TYPEMOUNTING HEIGHTSPACE TYPE
Diffused 120° Below 20 Feet Open Floor Plan
Standard 120° Any Open Floor Plan
80° Any Open Floor Plan
40° Below 20 feet Low Bay Racked Aisles
30° Above 20 feet High Bay Racked Aisles
20° Above 20 feet High Bay Racked Aisles
Diffused 30° Below 20 feet Low Bay Racked Aisles
Ambient Temperature Ratings
T, H Output Models: -35C to +55C (-31F to 131F)
V Output Models: -25C to +55C (-13F to 131F)
100%
90%
80%
70%
60%
50%
40%
30%
20%
Luminaire Wattage (%)
10%
0%
T, 120V-277V
H, 120V-277V
V, 120V-277V
UL limit
253035405045556065
Ambient Air Temperature (°C)
Mounting & Accessories
MOUNTING OPTIONSIMAGEORDER LOGIC CODE
Standard Chain/Cable Mount
Available on all fixture configurations
(chain not included). Y-Cable w/hook can
be ordered as an accessory.
Rod Mount (optional)
Available on all fixture configurations.
Attaches to 1/2” threaded rod (rod and
nuts not included).
Rod Mount Kit
ST = Standard
Mounting
Holes
Installed
22 = 1/2” Threaded Rod Kit
Pendant Mount (optional)
Available on all fixture configurations.
Attaches to 3/4” threaded conduit
(conduit not included).
Y-Cable w/hook (optional)
Use with Standard Mounting Option only.
Order separately. Price adder per pair.
5 ft., 10 ft ., 15 ft., 20 ft. lengths available.
Chain/cable mount is standard and included in price. Price adder for Y-Cable, Rod Mount, Indirect Mount, and Pendant Mount. Consult Sales for latest information.
See “Installation Instructions” for mounting details.