GE 681131065900, 106590, 106570, 681131065801, 106580 User Manual
...
106570
106580
e
16" Deluxe Pedestal Fan User’s Guide
For product service, call customer service at 877-207-0923.
Item Stock Number: UPC:
106570 (Gray) 681131065702
106580 (Blue) 681131065801
106590 (Brown) 681131065900
106590
READ AND SAVE THESE INSTRUCTIONS
Important Safety Instructions
This fan is for residential use only. It is not intended to be used in
commercial or industrial settings.
1. Never insert fingers, pencils, or other foreign objects through the grill.
2. Disconnect fan when moving it from one location to another.
3. Be sure that the fan is on a stable surface when operating to avoid the
chance of it overturning.
4. Disconnect fan when removing grill for cleaning. Reinstall grill before
reconnecting to power supply.
5. WARNING: To reduce the risk of fire, electric shock or personal injury:
a) Do not use this fan with any solid-state speed control device.
b) Unplug fan before cleaning or servicing.
c) If you disassemble your fan, completely reassemble before plugging
into outlet.
d) Do not use this fan in a window. Rain may create an electrical hazard.
For Your Safety
The AC power plug is polarized (one blade is wider than
the other) and only fits into AC power outlets one way.
If the plug won't go into the outlet completely, turn the
plug over and try to insert it the other way. If it still won't
fit, contact a qualified electrician to change the outlet,
or use a different one.
Do not attempt to bypass this safety feature.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND ARROWHEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE MOTOR
COVER (OR BACK). NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
a
WARNING:
To prevent fire or electrical
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT
shock hazard,
do not expose this product
to rain or moisture.
Maintenance
Always unplug cord before cleaning or disassembly.
Cleaning: IMPORTANT! DO NOT immerse electrical parts in water!
Disassembled grills may be immersed to be cleaned with a mild detergent
and water. Wipe all other parts with soft cloth moistened with water and
mild detergent only. DRY ALL PARTS COMPLETELY BEFORE
REASSEMBLING AND RECONNECTING TO POWER SOURCE.
Lubrication: Motor is permanently lubricated.
Assembly: Stand
For tall height (See drawing at right.)
1. Place base flat on floor.
2. Push tube
leaving connector end up.
Turning tube while pushing will assure
tube is fully seated in base.
3. Push tube
other tube, over connector.
Turning tube while pushing will assure
tube is fully seated on connector.
with
connector into base,
without
notched end
tube
connector
connector onto
For short height (See drawing at left.)
1. Place base flat on floor.
without
base
2. Push tube
into base, leaving notch end up.
Turning tube while pushing will
assure tube is fully seated in base.
notched end
tube
connector
base
without
with
connector
Rev. B 11/00 2085335 1
Assembly: Head
g
g
g
g
Place head assembly with collar
onto notched end of tube
connector. Align snap area on side of
head assembly collar with the notch
and catch on tube. Slide the head
assembly down onto tube and press
down firmly. You will feel a definite
click when seated properly, and the
head assembly will not turn.
without
Assembly: Blade & Grill
rear
grill
blade
fan
spinner
plastic nut
notched
rear grill
end
head assembly
collar
snap
tube
without
connector
motor
Operation
Oscillation: Push down oscillation
knob on motor housing to make fan
head move from side to side.
Tilting: This fan is equipped with a
multi-angle fan head for whole-room
air circulation. To properly adjust the
"tilt angle" of your fan:
1. Place one hand on the pole just
under the fan neck.
2. Place other hand on top of fan.
3. Gently push or pull the fan head
until it is in the desired position.
Note: The rachet assembly on the
16" Deluxe Pedestal Fan is designed
for positive lock positioning.
Therefore, when adjusting the fan
angle, you will hear a clicking sound.
This is normal.
Speed: Control fan speed with
switch at rear of motor.
Down: Oscillate
Up: Stationary
1. Tilt fan head back.
Put rear grill on motor.
pin
groove
3. Slide blade onto motor shaft.
(Align groove on blade hub with
pin on motor shaft.)
ornament
tab
5. With fan head in upright position, align ornament of front grill
so it is horizontal. Insert bottom of front grill into plastic rear grill. Tab at
the bottom of plastic rear grill should fit between spokes of front grill.
Snap front grill into rear grill beginning at the top and working down
both sides. Note: No grill clips are needed for assembly.
To secure blade, screw
fan spinner onto shaft
counter
clockwise until
tight on blade hub.
front grill
snaps
2. Align triangular "∆" cut in the rear
grill with triangular post on top of
front motor cover. Fully seat rear
grill and secure with plastic nut,
turning clockwise.
front grill
4. Install ornament into front grill.
Insert tabs into rectangular slots.
Snap into place.
tab
ornament
tab
slot
snaps
Warranty
What does your warranty cover?
• Any defect in material or workmanship.
For how long after the original purchase?
• 1 year.
What will we do?
• Provide you with a new product or refund original purchase price.
• The exchange unit is warranted for the remainder of your product’s
original one-year warranty period.
How do you make a warranty claim?
• Properly pack your unit. Include all parts, which were originally provided
with the product. We recommend using the original carton and packing
materials.
• Include in the package a copy of the sales receipt or other evidence of
date of original purchase. Also print your name and address and a
description of the defect. Return product to your nearest Wal-Mart
store. A new or reconditioned unit will be provided.
• For product service or replacement parts, call customer service at
877-207-0923.
What does your warranty not cover?
• Customer instruction. Your Owner’s Manual provides information
regarding operating instructions and user controls. For additional
information, ask your dealer.
• Installation and set-up service adjustments.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Product purchased or serviced outside the USA.
• Acts of God, such as but not limited to lightning damage.
How does state law relate to this warranty?
• This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
What if you purchased your product in the U.S., Canada or Mexico and
encounter a problem while using it outside the country of purchase?
• The warranty is valid only in the country of purchase and if you follow
the warranty claim procedure as noted.
106570 (Gray)
106580 (Blue)
106590 (Brown)
For product service, call customer service at 877-207-0923
Rev. B 11/00 2085335 Printed in USA 2
is a trademark of the General Electric
g
Company used under license by
Wal-Mart Stores, Inc., Bentonville, AR.
Loading...