GE 169131 User Manual

CANISTER VACUUM
Model Number: 169072 UPC: 68113169072
Customer Assistance
1-877-207-0923 (US) 1-877-556-0973 (Canada)
Thank you for purchasing a GE small appliance.
In keeping with the GE ecomagination initiative, please consider the option to recycle the packaging material and donate the appliance you are no longer using.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
WARNING – To reduce the risk of fire, electric shock, or injury:
• Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Always turn off this appliance when removing dust container and filters
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, Call our toll-free customer service number for information on examination, repair, or adjustment.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• The hose contains electrical wires. Do not use when damaged, cut, or punctured.
• Avoid picking up sharp objects
• Always turn off this appliance before connecting or disconnecting either hose or motorized nozzle.
• Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or filters in place.
• Do not use the vacuum cleaner to pick up large objects or objects that are likely to damage the vacuum cleaner.
• Ensure the power cord is kept well away from the revolving brushes of this product, when is on and running.
• Do not immerse cord, plug, or appliance in any liquid
• Do not use appliance for other than intended use.
• Do not carry the appliance while it is running.
• Don’t use an extension cord with this appliance
• S tore the appliance in a dry place.
• Keep end of hose, wands, and other open-ings away from your face and body.
• To avoid damaging the carpet, keep the vac-uum cleaner head moving at all times.
SAVE THESE INSTRUCTIONS!
2
CONSUMER SAFETY INFORMATION
This appliance is intended for household use only.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
PARTS
Accessory Kit
1. Main On/off Switch
2. Cord Rewind Button
3. Handle
4. Dust Full Indicator
5. Front Cover Release
6. Brush Height Adjustment
7. Handle Release
8. Exhaust Filter Release
9. Power Brush Cord
10. Power Control Button
11. Power Brush On/off switch
12. Power Cord
13. Height Level Window
14. Front Light
15. Accessory Kit
15A. Large Bristle Brush 15B. Floor Brush 15C. Crevice Tool 15D. Small Brush 15E. Round Brush 15F. Accessory Holder
16. Wand Release Button
3
ASSEMBLY INSTRUCTIONS
Assembling Flexible Hose
1. Insert the flexible tube (the end without the handle) into the air intake duct on the canister until you hear a click to indicate that the hose is locked into the unit
2. Plug the cord into the socket on the front
of the canister.
Assemble handle into telescopic tube
1. Handle only fits on one end.
2. Insert the other end of the telescopic tube into
the metal tube attached to the powerhead.
Note:
Be sure connectors are aligned.
3. Insert completed telescopic tube into
powerhead.
Extending/Collapsing the telescopic tube
To extend the telescopic tube, push the black release button and then pull the tube to the desired length.
Note: Shorten length of telescopic tube for storage.
4
Loading...
+ 7 hidden pages