Document Protection Solutions
Protect What Matters on Paper - Whatever the Size & Shape.
www.accoeurope.com
Roll Lamination technology perfectly adapted for Office and Educational use.
Physically compact and very easy for all to use. Capable of protecting many sizes
and shapes of paper or card to a maximum width of 305mm to almost any length
with a full selection of dedicated high-quality Gloss or Matt polyester Laminating
Films to a professional standard.
Key Features & Benefits include:
• One Minute Warm-Up time. No wasted Office time.
• Full Film Range Capability. All weights, every application.
• 42.5, 75, 125, 175 & 250 Microns (85, 150, 250, 350 & 500 Total Microns.
• High Speed. Laminates at 1m per minute.
Heat Protection Shield.
Prevents inadvertent contact
with Heat Shoes and keeps
dust and other materials away
from Lamination zone.
• 1 x A4 in approximately 13 seconds.
• 1 x A3 in approximately 18 seconds.
Easily understandable Control Panel.
• Run/Stop/Reverse. Single speed for any Film/Paper
type & a convenient Reverse mode for misfeeds, etc.
• Ready Lamp. Illuminates when correct operating
temperature achieved and lamination can begin.
• Temperature Control. Up to 10 settings to adjust to any
laminate weight or paper type to ensure perfect lamination.
• Power Lamp. Clearly indicates that unit is plugged in and switched on.
Full Selection of Safety Features.
• Heat Protection Shield. Prevents inadvertent contact with Heat Shoes.
• Feed Table Latch. The Laminator will only function when Feed Table is locked in position.
• Auto Shut-Off. After one hour of inactivity the Laminator will automatically shut down.
• Full EU Safety Compliance. Including 2 year warranty.
Patented EzLoad™Film Loading Technology.
• Film Rolls supplied with Colour Coded Plugs. Makes
it impossible to load replacement Roll Films in error.
• Threading & Loading Guide. Supplied with unit.
• No Film 'Shafts'. Easier for Office personnel to reload.
Feed Table Guide.
Aligns items to be laminated and
ensures that longer media is fed
into the laminator straight.
Can also be positioned in the centre of
the Feed Tray to enable small items to
be fed in two-up at a time. Motor stops
automatically upon removal.
Model Product code
™
RollSeal
Ultima EzLoad™35 EU: 1701640
UK: 1701660
CH: 1701670
Small, Compact & Lightweight.
At under 0.5m wide, EzLoad™35 is easily portable
around the office and fits on any standard desk.
2
Endless Applications.
The 305mm width and a length only
restricted by the meterage of the Roll,
makes the EzLoad™35 also ideal for
Banners, Posters, Signage - even in
shapes only restricted by ones creativity!
EZ Load Film Loading Technology
Colour Coding and matching Male/
Female plugs make loading fully
error-free.
‘Snap & Lock’ Lever keeps roll
secure. No Film 'Shafts' to
confuse office users.
Rear Slitter.
Built into the chassis of
EZLoad™35 is a horizontal
Slitter that can be used to
trim the film/media as it
exits from the Laminator.
Power & Ready Lamps.
Clear indication that unit is both
On and Ready to laminate.
Bottom Film Roll
Same EzLoad™Film Loading
Technology ensures no confusion
with Top Roller. Access only after
Feed Tray removal.
Run/Stop/Reverse
Simple 'Rocker' Switch to
engage motor for Lamination,
Stop or Reverse.
T emperature Control Knob
Up to 10 settings for any of the
five standard film thicknesses
(42.5, 75, 125, 175 and 250
micron) in Matt or Gloss.
The Film Selection
™
RollSeal
grade Polyester a low melt adhesive (EVA) layer
making them ideal for a broad spectrum of
paper types/weights and printing techniques.
Available in three finish combinations and four standard weights (see overleaf):
EzLoad Films are made from high
Colour Coded Plugs.
All Rolls are fitted with the colour
coded and matching male/female
EzLoad™'plugs' that ensure
replacement Rolls are correctly loaded.
• Matt. Non-Reflective and tactile
• Matt/Gloss Combination of 1 + 1
• Gloss. Eye-catching & colour enhancing.
All Rolls are 305mm wide to accept the
Din A4/A3 (short edge) paper standard.
3
EzLoa d™Fi lm At-a-G lan c eGui de
Film Finish Thickness (Micron) Roll Length (M) & Width (cms) Box Qty Product Code
Matt 42.5 mic 150m x 305 mm 2 3400923EZ
75 mic 75m x 305 mm 2 3400713EZ
125 mic 60m x 305 mm 2 3200201EZ
Matt/Gloss 75 mic 75m x 305 mm 1+1 3200202EZ
Gloss 42.5 mic 150m x 305 mm 2 3400919EZ
75 mic 75m x 305 mm 2 3400927EZ
125 mic 60m x 305 mm 2 3400931EZ
175 mic 30m x 305 mm 2 3200200EZ
250 mic 30m x 305 mm 2 3400935EZ
Film Loading Top Roll.
Lift Heat Shield and simply
insert film plug into colour
coded cup and lock.
AccuCut
Rotary & fixed blade trimmers
Film Loading Bottom Roll.
Remove Feed Table and insert
as per Top Roll
TM
Perfect Partners in Roll Lamination Technology
Multi-Functional Rotary Trimmers in two convenient widths which
are ideal to trim laminates in either a flush-cut or encapsulate finish
after lamination with RollSeal
• Trim, Score & Perforate by simply turning the Dial-a-Blade*
• 457 or 615 mm Trim Length Options
• Metric/Inch Rules and Markings
• Paper Clamp Mechanism
• 'Safe-Trim' Blade Mechanism
• Replacement Dial-a-Blades available
• Replacement Trim Mats available
Model Cutting Length Product code
A525Pro 3in1 457mm AC001235
A535Pro 3in1 615mm AC001240
Accessories for A500Pro Series Product Code
Replacement Dial-a-Blade 1756606
Replacement Cutting Mat (A525Pro) 1756602
Replacement Cutting Mat (A535Pro) 1756603
™
* Trim Capacities depend very largely upon film weight and media.
Capacity reduces when using Perforate options and it is recommended
to score before laminating to ease the post-laminating folding process.
Not recommended for 175 & 250 Film weights depending upon media
weight. Test prior to production.
Authorised Re-Seller:
MTCATEZY01UK.06
www.accoeurope.com
ACCO Brands Europe Ltd reserves the right to modify specifications without prior notice.
Designed by Qube. www.qubedesign.co.uk
Loading...