GBC 5000L User Manual [es]
FUSION™5000L
12" LAMINATORS
start here
démarrez ici
empieza aquí
FUSION™5000L
12" LAMINATORS
GB instruction manual 4
F manuel d’utilisation 10
E manual de instrucciones 12
English
professional finish… automatically!
Welcome to the new Swingline GBC 5000L laminator which
allows lamination to be completed quickly and simply with
Swingline GBC quality lamination output. Perfect for novice
users choosing automatic self setting to expert users with
multiple pouch thicknesses and document sizes.
For best lamination results and performance, use only
Swingline GBC branded pouches.
Please take a little time to study these instructions to ensure
you get the best results out of your machine.
safety instructions
Your safety as well as the safety of others is important to ACCO® Brands. In this
m
m
instruction manual and on the product are important safety messages. Read these
messages carefully.
The safety alert symbol precedes each safety message in this instruction manual.
This symbol indicates a potential personal safety hazard that could hurt you or others,
as well as cause product damage or property damage.
The following warning is found on the
product in several languages.
This safety message means that you
could be seriously hurt or killed if you
open the product and expose yourself
to hazardous voltage.
4 register this product online at www.swingline.com
c
WARNING
m
Electrical shock hazard.
Do not open. No user
serviceable parts inside.
Refer servicing to qualied
service personnel.
points to note
• Use this unit only for its intended use of laminating documents
m
• Only use 3 mil, 5 mil, 7 mil or 10 mil pouches with this laminator
• Do not laminate an empty pouch
• The unit must be connect to a supply voltage corresponding to the electrical rating shown
m
on the unit
• The socket-outlet shall be installed near the equipment and shall be easily accessible
m
• Ensure the machine is clear of pouches prior to starting the next pouch
• Clean the lamination rollers on a regular basis
• Maximum 12” document pouch
• Active anti jam feature may not detect issue on smaller items
• Failure to comply will result in damage and invalidate guarantee
m
12” x 17
” on Swingline GBC Fusion 5000L 12” Laminator
service
Do not attempt to service or repair the pouch laminator yourself. Unplug the unit and contact an
authorised Swingline GBC service representative for any required repairs.
technical specifications
English
Electrical
Machine Dimensions 22.4x7.5x5.19 inch
Machine Weight 2.6lbs (4.6kg)
Maximum Pouch Width 12.0 inch (303mm)
120V AC / 60Hz /
12A / 1410W
(570x193x132mm)
Maximum Pouch
Thickness
Maximum Thru-put
Thickness
Warm-Up Time Approximately 1 minute
Speed 40 inches (1000mm)
FUSION™ 5000L 12" LAMINATORS 5
10 mil (250 mic)
1.0mm
per minute
English
getting ready to laminate
Easy Set Up
1 Remove the plastic exit tray from the box and place into the two holes on the back of the
laminator and extend to use. Ensure that there is sucient space behind the laminator for
the item to be removed.
2 Take the electrical plug and place in an appropriate power source, which is near the table
you intend to use.
3 The laminator will briey ash the Swingline GBC logo on the control panel and will make
an audible beep.
Interactive User Display
4 To use the laminator gently tap the ‘power on’ button. A sequence of lights will cross the
control panel.
NOTE: Your new laminator may emit
a slight odor during the initial
operation. Its is normal and will
diminish after a few hours of
operation.
5 If 3 mil is not the pouch thickness you want to select, using the arrows scroll until the required
pouch thickness setting is shown and press “Enter”.
Intelligent Pouch Select
6 Using the ‘Auto’ setting allows the user to use any thickness of pouch and the laminator
will automatically measure the thickness of the pouch and document and self set to the
appropriate speed.
NOTE: During warm up a circle will be
formed on the control panel and a
red indicator will ash in the centre
of the circle until ready ( ).
When ready a series of three beeps
are heard and the ( ) will show
on the display. The machine will not
take any pouch during warm up.
6 register this product online at www.swingline.com
English
loading the pouch
1 Take your item to be laminated and place into the laminating pouch. Ensuring it is rmly placed
along the sealed edge of the pouch. This is to help ensure that you get optimal quality output.
SEALED EDGE
letter, legal, menu Irregular shaped item
Before laminating important or unique documents, always run a test pouch through
the laminator using a similar type document.
SEALED EDGE
NOTE: Do not cut pouches prior to
lamination.
FUSION™ 5000L 12" LAMINATORS 7
English
laminating
1 On the front of the laminator there are adjustable guides to help you feed your pouch accurately.
Move the guides to appropriate line which matches your pouch/ item to be laminated.
Accurate
Feed Guides
2 Feed the sealed edge of the pouch, into the laminator between the guides. The laminator will
grip the pouch and guide it through to the exit tray.
NOTE: Do not force guides
against pouch
3 Do not force guides tightly against pouch. Move guides to an appropriate setting to allow pouch
to be fed in without touching guides.
4 When you are nished laminating tap the ‘power’ button and if required remove the tray, unplug
and store accordingly.
Upon exiting remove your
laminated item immediately
and lay on a at surface to
ensure optimal quality.
NOTE:
On Power O there will continue to be a noise emitted from the unit for approximately
30 seconds, this is for cooling purposes.
8 register this product online at www.swingline.com
English
additional features
Intelligent Status Alert
If pouch misfeeds or jam starts to occur a series of beeps will be heard - and the laminator will
automatically reverse the document out (
Intelligent Pouch Reverse
To recover a partially fed pouch press and hold the “Reverse” (
quickly reversed out of the laminator. You will hear a series of single beeps until Reverse button
(
) is released.
).
NOTE: Never reuse a misfed or
jammed pouch.
) button and the pouch will be
NOTE: Do not put partially laminated
items back into the laminator.
Intelligent Power O
For added safety and environmental reasons the laminator will automatically go into
sleep mode after 30 minutes of inactivity. You will hear a single beep before this occurs.
cleaning
WARNING: UNPLUG THIS PRODUCT BEFORE CLEANING THE EXTERIOR.
m
WIPE EXTERIOR ONLY WITH A DAMP CLOTH AND DO NOT USE
DETERGENTS OR SOLVENTS.
Regularly feed a cleaning card or sheet of paper through the laminator to clean
the rollers.
FUSION™ 5000L 12" LAMINATORS 9
Loading...