Gateway Modular Bay Device
User Guide
Modular Bay Device User Guide
Changing modules
Your convertible notebook’s modular bay supports different bay modules,
such as a CD, combination DVD/CD-RW, or multi-format DVD±RW
drive, or multibay battery.
To change bay modules:
1 If you are removing a drive, make sure that there is no disc in it.
2 Turn off your convertible notebook (do not place it in Standby or
Hibernate mode).
3 Make sure that the LCD panel is in notebook mode, then close the
LCD panel. For more information, see Using the display in your
convertible notebook user guide.
4 If the convertible notebook is connected to the optional port
replicator, disconnect it. For more information, see the port
replicator user guide.
5 Turn your convertible notebook over so that the bottom is facing up.
2
www.gateway.com
Changing modules
6 Remove the modular bay lock screw (if one is present), then slide
and hold the modular bay latch. The module may move out slightly.
Modular bay lock screw
Screw
www.gateway.com
3
Modular Bay Device User Guide
7 Slide the module out of the convertible notebook.
8 Firmly push the new module straight into the bay until the latch
clicks into place.
9 Replace the modular bay lock screw.
10 If you are using a multibay battery instead of a main battery, insert
the weight saver that was included with your multibay battery into
the main battery bay.
© 2005 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized
logo, and the black-and-white spot design are trademarks or registered trademarks of
Gateway, Inc. in the United States and other countries. All other brands and product names
are trademarks or registered trademarks of their respective companies.
MAN VIPER MULTIBAYDEVICE UPDR0 8/05
4
www.gateway.com
Loading...