Gastroback 41006 User Manual

0 (0)

Operating Instructions

Design BLENDER Advanced Pro

Art.-No. 41006 Design Blender Advanced Pro

Read all provided instructions before first use!

Model and attachments are subject to change!

For household use only!

Carefully read all provided instructions before you start running appliance and pay attention to the warnings mentioned in

these instructions.

Table of contents
Knowing your Design Blender Advanced Pro..............................................................	42
Important safeguards...............................................................................................	43
Safeguards for daily operation..............................................................................	44
Movable and sharp-edged parts – risk of injury......................................................	46
Important safeguards for all electrical appliances....................................................	46
Technical specifications............................................................................................	47
Properties of your new Design Blender Advanced Pro..................................................	47
1. Extra wide blades – KINETIX blade system.........................................................	47
2. Continuous blending action..............................................................................	48
Assembling and disassembling the appliance..............................................................	48
Disassembling the blender jug...............................................................................	48
Assembling the blender jug..................................................................................	49
Operating...............................................................................................................	50
General tips........................................................................................................	51
Tips for operation................................................................................................	51
Functions............................................................................................................	52
Suggested uses for your blender............................................................................	53
Directions for use.................................................................................................	54
Production steps..................................................................................................	54
Care and cleaning...................................................................................................	56
Cleaning the blender jug......................................................................................	56
Disassembling the blender jug and removing stubborn residues................................	57
Cleaning the motor block.....................................................................................	57
Storage..................................................................................................................	58
Notes for disposal...................................................................................................	59
Information and service............................................................................................	59
Warranty................................................................................................................	59
Recipes..................................................................................................................	60

Dear Customer!

Congratulations! Your new Design Blender Advanced Pro comes with some remarkable features for preparing your dishes.

The secret to the Kinetix Blade System is the continuous movement created inside the jug. It allows the blender to combine the functions of a blender with a mini food processor for the ultimate in versatility. Now you can use your blender to not only crush ice to a snow consistency and create super smooth frappés and smoothies, but to also process nuts, vegetables and herbs into evenly chopped pieces and perfect purees, and mince meat and fish for delicious homemade meals.

Combined with a powerful 2,000 watt motor and heavy duty commercial grade components, the blender is built for durability, reliability and professional results superior to all other blenders.

These instructions for use will inform you about the various functions and features, which make it easy to take pleasure in your new blender.

We hope that you will enjoy your new blender.

Your Gastroback GmbH

knowing your Desing blender Advanced pro

Inner lid

Unique ring pull design ensures the lid is easy to remove yet sealed tight during operation

2 litre polycarbonat jug

Soft touch handle for better grip

Kinetix blades

Mount of the jug

Motorblock with drive coupling

Control panel with illuminated buttons: Power,

Blend, Smoothie und Ice Auto Pulse button

Cord storage and sturdy non-skid feet

Power button: to get the appliance into the operational mode or to turn it ´Off`. The button will illuminate and flash in red when in operational/operating mode Blend button: The Blend function is pre-programmed and will illuminate in blue in operational/operating mode. The appliance will automatically stop after 2 minutes and turn the appliance in operational mode.

Smoothie button: The Smoothie function is preprogrammed and will illuminate in blue in operational/ operating mode. The appliance will automatically stop after 1 minute and turn the appliance in operational mode.

Ice Auto Pulse button: pre-programmed interval operation. The button will illuminate in blue in operational/operating mode. The appliance will automatically stop after 1 minute and turn the appliance in operational mode.

Important safeguards

Save the instructions for further reference. Do not attempt to use this appliance for any other than the intended use, described in these instructions. Any other use, especially misuse, can cause severe injury or damage by electric shock, fire or moving mechanical parts. These instruction is an essential part of the appliance. When passing on the appliance to a third person, ensure to include these instructions.

Never leave the appliance unattended when in operational mode. Any operation, repair and technical maintenance of the appliance or any part of it other than described in these instructions may only be performed at an authorised service centre. Please contact your vendor.

•WARNING: To avoid injury to persons and damage, always turn the appliance ´Off`, wait for the motor to stop completely and unplug the appliance, immediately after operation and before assembling/disassembling or cleaning the appliance. Never use force operating, assembling or disassembling the appliance.

•WARNING: The blades are very sharp. Pay attention when handling the units. Only touch the blade assembly housing when handling the blades. Handle with care when cleaning.

•Note: Ensure the appliance is properly assembled and the blade assembly housing and the silicon seal are properly attached before connecting the plug into the power outlet. Never turn the appliance `On` without the lid or inner lid. Never place only the holder or the blade only on the motorblock. Never touch the drive gear when the plug is connected to the power outlet.

•WARNING: If the blade is mounted in the blender jug, the blender jug is positioned on the motorblock, and the plug is connected to the power outlet, do not insert your fingers, a wooden or plastic spoon or similar cooking utensils or foreign substances in the blender jug. Always take the blender jug off the motorblock before pushing the food down with a spoon.

•WARNING: Never place the blender jug on the motorblock without the blade assembly housing. Without the blade assembly housing the bottom of the blender jug is open. Liquids could spill and might damage the motorblock.

•If the blender jug is not securely locked on the motorblock, the unit does not work.

•IMPORTANT: Ensure the blender jug is locked securely onto the motorblock and that you can not knock the appliance over during operation. The motor will not start before the plug is plugged into the power outlet, the blender jug is securely locked onto the motorblock and the appliance is switched ´On`.

•As a safety feature, the unit automatically shuts off if the blades become stuck. Unplug the cord and clear carefully the blockade and allow the motor to rest for one minute before turning the appliance back on. The functions have been designed to run for a specific time. The Blend function will stop after operating for 2 minutes and the Smoothie and Ice Auto Pulse function after operating 1 minute.

•Do not operate the appliance continuously with heavy loads for more than 10 seconds. Allow the motor to rest for 1 minute before you continue.

•Do not chop extremely hard food, such as nuts with shell or bones to avoid overrunning, spurt out or that the motor stalls or stucks during operation because the blade is blocked.

•WARNING: Do not operate the appliance when the blender jug has a crack or any part of it is likely to be damaged. The appliance is likely to be damaged if the appliance was subject to inadmissible strain (i.e. overheating, mechanical, or electric shock) or if there are any cracks, excessively frayed parts, distortions or the motor stalls or stucks. In this case, immediately unplug the appliance and return the entire appliance (including all parts and accessories) to an authorised service centre for examination and repair.

•WARNING: When processing hot food take out the inner lid to let out the hot steam and to avoid pressure build-up. Place a towel over the opening in the lid to avoid splatter.

•Never place anything other than food and liquids in the blender whilst the motor is running.

•WARNING: Do not place blender in the freezer with food or liquids. This will freeze and damage the blade assembly housing, blender jug and motor.

•CAUTION: DO NOT place the motorblock in an automatic dishwasher.

•ATTENTION: The circular plastic surround attached to the base of the blender jug in not removable! Same with the plastic surround attached to the blades.

Safeguards for daily operation

•The appliance is designed for normal household quantities. Do not operate or store the appliance outdoors or in damp or wet areas.

•Do not attempt to operate the appliance using any parts or accessories not recommended by the manufacturer (i.e. blade, sealing ring). Do not operate the appliance, when the appliance or any part of it is likely to be damaged, to avoid risk of fire, electric shock or any other damage or injury to persons. Do not attempt to open the motor housing or to repair the power cord. Check the entire appliance regularly for proper operation. The appliance is likely to be damaged if the appliance was subject to inadmissible strain (i.e. overheating, mechanical, or electric shock) or if there are any cracks, excessively frayed parts, distortions or the motor stalls or stucks. In this case, immediately unplug the appliance and return the entire appliance (including all parts and accessories) to an authorised service centre for examination and repair.

•Do not lift, pull or carry the appliance by the power cord. To move or operate the appliance, always grasp the motorblock.

•This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Do not let children play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

•Always place the appliance on a clean, dry and stable surface where it is protected from inadmissible strain (i.e. mechanical or electric shock, overheating, frost, moisture) and where young children cannot reach it. Do not place the appliance near the edge of a bench or table during operation. Vibration during operation may cause the appliance to move.

• Operate the appliance on a well accessible, stable, level, dry, and suitable large surface. Do not place the appliance or any part of it on or near hot surfaces (heater, gas burner, grill, or oven). Do not place the appliance near the edge of the table or counter or on inclined or wet surfaces or where it can fall. Keep the entire appliance away from direct sunlight and sharp edges. Ensure the blender jug is locked securely onto the motorblock and that you can not knock the appliance over during operation to avoid personal injury. Do not place the

appliance on a metal surfaces for example, a sink drain board.

• Never leave the appliance unattended when the plug is connected to the power outlet. Always IMMEDIATELY turn the appliance ›Off‹, wait for the motor to stop completely, and then unplug the appliance, if the appliance is not in use (even for a short break) and before assembling,

disassembling or cleaning. Never leave the appliance unattended when in operational mode.

• Do not leave any food dry on the surfaces of the appliance. Do not immerse the motor housing or power cord in water or any other liquid. Do not pour or drip any liquids on the motor housing or power cord. When liquids are spilled on the motor housing, immediately unplug the appliance and dry the motor housing to avoid risk of electric shock or fire. Do

not attempt to operate the appliance, when liquids are on or in the motor housing.

•Do not place the motorblock in an automatic dishwasher!

•To avoid damage, do not use any abrasive cleaners, corrosive chemicals (i.e. disinfectants, bleach) or cleaning pads for operation or cleaning. Do not use any hard or sharp utensils for operation or cleaning. Always handle the entire appliance and all parts of it with

care and without violence.

•WARNING: The blades are very sharp. Pay attention when handling the blades. Only touch the blades on the blade assembly housing and handle with care when cleaning.

•Do not use the appliance if it is damaged or units of the appliance are damaged. Do not use the appliance if it does not function properly or if it was excessively loaded. The appliance is likely damaged if the appliance or units of the appliance show cracks, exorbitant wearing down, alterations or leaks. It is also likely damaged if the drive wheel of the motorblock moves slowly. Take the appliance for technical maintenance and repair to an authorised specialised

reparation shop.

•Do not operate the appliance without food or liquids in the blender jug.

•WARNING: Do not overfill the blender jug to avoid overrunning, spurt out. If necessary, take some food out of the blender jug, using a wooden or plastic spoon, before starting the appliance again.

•In the unlikely event of an excessive load or if the motor stalls or stucks turn ›Off‹ the appliance (all buttons are deactivated) to avoid overheating and let the motor rest for 10 seconds

to cool down before continuing to operate.

•Do not chop extremely hard food, such as nuts with shell, bones to avoid overrunning, spurt out or that the motor stalls or stucks during operation because the blade is blocked.

•WARNING: Do not fill ingredients into the blender jug which exceed a temperature of 60 degrees. After processing ice cubes slowly heat up the blender jug before processing hot ingredients. Otherwise the blender jug will crack or get damaged. Use gloves processing hot liquids and do not fill the blender jug up too high. Ensure not to burn yourself on the blender jug, on overrunning, spurt out or hot steam. Touch the handle only for lifting the blender jug. When processing hot food take out the inner lid to let out the hot steam and to avoid pressure build-up. Place a towel over the opening in the lid to avoid splatter.

•The appliance is for household only.

Movable and sharp-edged parts – risk of injury

•Do not remove the blender jug from the motorblock whilst in operation. Always turn the appliance ´Off` (all buttons are deactivated), wait for the motor to stop moving and then pull the plug before removing the blender jug from the motorblock or taking off the lid. It could take about 3 seconds until the motor has completely stopped. Never leave the appliance ›On‹ when not in use.

•Never put your hands, wooden spoons or other foreign substance (such as hair, cloth, brush, towels) into the blender jug when the motor is running or the appliance is connected to the power outlet. Always take the blender jug off the motorblock first before you push down the food with a spoon or add new ingredients.

•WARNING: The blades are very sharp. Pay attention when handling the units. Only touch the blade assembly housing when handling the blades. Handle with care when cleaning. Only store the appliance completely assembled. This way the blades will be out of reach.

•Note: Ensure the appliance is properly assembled and that the blade is properly attached before putting the plug into the power outlet. Do not operate the appliance without the lid or the inner lid. Never place only the jug or the blade assembly housing only on the motorblock. Never touch the drive gear when the plug is connected to the power outlet.

•Always keep one hand on the lid while processing.

•WARNING: If the blade is mounted to the blender jug, the blender jug is positioned on the motorblock, and the plug is connected to the power outlet, do not insert your fingers, a wooden or plastic spoon or similar cooking utensils or foreign substances in the blender jug. Always take the blender jug off the motorblock before pushing the food down. Use a spatula to dislodge or stir the food before continuing. Do not use fingers as the blades are sharp.

Important safeguards for all electrical appliances

•Always operate the appliance near a suitable wall power outlet and connect the appliance directly to the power outlet. Do not use any extension cords or a multiple desk outlet.

•Ensure that the voltage rating of your mains power supply corresponds to the voltage requirements of the appliance (230/240 V, 50 Hz, AC). Always connect the appliance directly to a mains power supply wall socket with protective conductor (earth/ground) connected properly. The installation of a residual current safety switch with a maximum rated residual operating current of 30 mA in the supplying electrical circuit is strongly recommended. If in doubt, contact your local electrician for further information.

•Do not leave the appliance unattended when connected to the power supply. Always turn the appliance ´Off` (all buttons are deactivated) and immediately unplug the appliance after operation and if it is not in use (even for a short break) and before cleaning and/or assembling or disassembling. Always grasp the plug to disconnect the appliance from the power outlet.

•Fully unwind the cord before use. Always handle the power cord with care. Do not pull or strain the power cord. The power cord may never be knotted or squeezed. Do not let the power cord hang over the edge of the table or counter. Take care not to entangle in the power cord. Do not touch the appliance with wet hands to avoid risk of electric shock. Do

not touch the appliance, if it is damp or wet or is touching wet surfaces while connected to the mains power supply. In this case, immediately unplug the appliance and dry the appliance (see ›Care and cleaning‹).

• Ensure that the holder at the bottom of the blender jug is leak-proof before putting the blender jug on the motorblock. Always wipe off spilled liquids immediately. Do not immerse the motor or power cord in any liquids or spill any liquids on it or place the motor on wet surfaces. Never let any liquids run into the motorblock or underneath it to avoid electric shock. There are louvre underneath the motorblock. Ensure that no water can run into the louvre. When liquids are spilled on the motor housing, immediately unplug the appliance and dry the motor housing to avoid risk of electric shock or fire. Do not attempt to operate the appliance, when liquids are on or in the motor housing.

Technical specifications

Model:	Art. No. 41006 Design Blender Advanced Pro

Power supply:	220-240 V AC, 50/60 Hz

Maximum power consumption:	2,000 W

Length of power cord:	approx. 110 cm
Weight:	approx. 5.1 kg

Dimensions:	approx. 180 x 205 x 465 mm
	(width x depth x height)

Revolutions:	5,500 +/- 5% per minute

Certification:

Properties of yor Design Blender Advanced Pro

1. Extra wide blades - KINETIX Blade System

Conventional blades

KINETIX blades

Two of the stainless steel blades are extra wide, reaching ingredients all the way to the sides of the blender jug. Combined with an additional set of dual central blades, all ingredients are completely shopped and evenly processed every time. To ensure the blades stay longer sharp the blades are made from surgical grade stainless steel.

2. Continuous blending action

blade & jug System

Conventional blades KINETIX blade and jug system

The Kinetix Blade System ensures there are no spaces for food to get caught or trapped. The extra wide blades are contoured to the base of the blender jug meaning food can never jam or escape the high speed blades. There are no dead zones, so food is 100% blended with no over or under blended ingredients.

Assembling and disassembling the appliance

Disassembling the blender jug

1.Always turn the appliance ›Off‹ (all buttons are deactivated), wait until the motor stops and unplug the appliance before assembling/ disassembling. Always completely assemble your appliance before you put the plug into the power outlet.

2.Remove the blender jug from the motor base by grasping the handle and lifting the jug in an upward direction.

3.Take the lid off the blender jug and empty the blender jug (picture A).

4.Take the clear inner lid and twist it into the direction you are able to move it to take it out. Pull the inner lid up to remove it (picture B).

Note: The inner lid has two small guiding pins that fit in the matching gaps of the lid. Depending on the direction you turned it when lock-

pic A

pic B

ing it in position you are able to remove it by turning it clockwise or anticlockwise.

5. Remove the blade assembly housing by upturning the blender jug and twisting the Blade Removal System clockwise to unlock (picture C and D), then lift upwards and away from the base of the blender jug.

ATTENTION: The circular plastic surround attached to the base of the blender jug is not removable.

ATTENTION: The circular plastic surround attached to the blades is not removable.

WARNING: The blades are very sharp. Pay attention handling it and if possible only hold on to the blade assembly housing.

6.Remove the silicon seal from the blade assembly housing for cleaning (picture E).

7.Clean the units with a soft sponge in warm soapy water and dry them off afterwards. Pay attention not cutting yourself handling the blade. Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this could damage the surfaces. Always handle the entire appliance with care and without violence.

Note: The blender jug, lid, inner lid, blade assembly housing and silicon seal are dishwasher safe. The lid, inner lid, blade assembly and silicon seal may be washed in the dishwasher in the top shelf on low temperature. The blender jug may be placed in the bottom shelf.

Assembling the blender jug

pic C

pic D

pic E

Ensure that the blender jug and all units are clean before you assemble the appliance.

1.To assemble the blender jug, place the silicon seal onto the blade assembly housing (picture F). Ensure the sealing ring is in proper posi- pic F tion and does not fall into the blender jug when attaching the blade assembly housing to the blender jug. The sealing ring has to be clean and show no crustifications, crinkles, cracks or look porous.

2.Hold on to the blade assembly housing with your right hand and with your left hand hold on to the handle of the blender jug. Upturn the blender jug and insert the blade assembly housing into the jug base

(picture G and H). The blades have to face inside the blender jug, pic G when inserting the blade assembly. Twist the Blade Removal System anticlockwise until firmly locked into position.

WARNING: The blades are very sharp. Pay attention handling it and if possible only hold on to the blade assembly housing.

Note: Ensure the blade assembly housing is securely locked onto the jug base.

Abb H

+ 23 hidden pages