Gasboy 8800 User Manual

MDE-4641A

User Quick Reference Guide

for Atlas™ 8800

July 2010

Software Versions

For details on software versions, refer t o MDE-4331 Atlas™ Fuel Systems Installation Manual, MDE-4363 Atlas Fuel Systems Owner’s Manual, and MDE-4334 Atlas Startup and Service Manual.

Power on and Command Code 8 displays the current software version.

Display Pump Totals

•Press Enter after making selections.

•Press $Total.

• Select Grade.

•Press Volume Total.

• Select Grade.

•Press Enter to view Side 2 totals.

•Press Clear to exit.

Pin Code Entry

Level 1- Press F1, type 4-digit ID (default 2222), and press Enter. Press F1 to exit any command code. Press F2 to return to normal operation.

From Level 1

Command Code 1: Program PPU

Press Enter after making selections.

• Enter 1

• Select Side**

• Select Grade

• Select Price Level

• Enter new PPU (Repeat for other Side, Grade, and Price Level)

Command Code 2: Program Two-Wire/Standalone

Press Enter after making selections.

• Enter 2

• Select Configuration

0 : Standalone 1 : Two-Wire* 2 : Pulse Output

Command Code 3: Program Allocation

Press Enter after making selections.

• Enter 3

• Select Side**

• Select Hose/Grade

• Enter Allocation amount (000.0 default) (Repeat for other Side, Hose, and Grade)

Command Code 4: Program Manual Blank Display Cash/Volume Pr eset Select

Press Enter after making selections.

• Enter 4

•Select Function Code 1

Function Code 1: Manual Blank Displays

0 : Display OFF 1 : Display ON*

Command Code 5: Test/Program Customer Programmable Preset

Press Enter after making selections.

• Enter 5

•Select Configuration 0 : STOP Test/Program 1 : START Test/Program

(After the test is complete, refer to the programming steps in MDE-2531 Pump/Dispenser Service Manual).

Command Code 6: Memory Clear for Error Code 31 or 35

Press Enter after making selections.

• Enter 6

•Select 1

Command Code 7: Program Totals Input

Press Enter after making selections.

• Enter 7

•Select Side 1 : Side A 2 : Side B

•Select Grade

•Press $Total

• Enter Money Total

(Repeat for other Side and Grade)

• Press Volume Total

(Repeat above procedure for Volume Totals)

Command Code 8: Display Version Number

Press Enter after making selections.

• Enter 8

•Select Software Optio n 1 : Pump Controller

* Default to system software if

pump/dispenser is not a Blender.

** 1 : Side A

2 : Side B 3 : Both Sides

Error Codes

31- Totals Data Error 35- Configuration Data Error 44- Pump Handle Up at Power Up

AtlasTM is a trademark of Gasboy International.

Call GASBOY Technical Support at: 1-800-444-5529

Greensboro, NC 27420 · Phone 1-800-444-5529

http://www.gasboy.com